Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757306AbdLQMsp (ORCPT ); Sun, 17 Dec 2017 07:48:45 -0500 Received: from mail.kernel.org ([198.145.29.99]:42556 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752395AbdLQMsm (ORCPT ); Sun, 17 Dec 2017 07:48:42 -0500 DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 038AE218A5 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=jic23@kernel.org Date: Sun, 17 Dec 2017 12:48:37 +0000 From: Jonathan Cameron To: Maciej Purski Cc: Stefan Bruens , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, Peter Meerwald-Stadler , Lars-Peter Clausen , Hartmut Knaack , Jean Delvare , Guenter Roeck , Marek Szyprowski , Bartlomiej Zolnierkiewicz Subject: Re: [PATCH v3] iio: adc: ina2xx: Make calibration register value fixed Message-ID: <20171217124837.71ce745a@archlinux> In-Reply-To: <1513324763-21541-1-git-send-email-m.purski@samsung.com> References: <1513324763-21541-1-git-send-email-m.purski@samsung.com> X-Mailer: Claws Mail 3.15.1-dirty (GTK+ 2.24.31; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5483 Lines: 160 On Fri, 15 Dec 2017 08:59:23 +0100 Maciej Purski wrote: > Calibration register is used for calculating current register in > hardware according to datasheet: > current = shunt_volt * calib_register / 2048 (ina 226) > current = shunt_volt * calib_register / 4096 (ina 219) > > Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in > order to avoid truncation error and provide best precision allowed > by shunt_voltage measurement. Make current scale value follow changes > of shunt_resistor from sysfs as calib_register value is now fixed. > > Power_lsb value should also follow shunt_resistor changes as stated in > datasheet: > power_lsb = 25 * current_lsb (ina 226) > power_lsb = 20 * current_lsb (ina 219) > > This is a part of the patchset: https://lkml.org/lkml/2017/11/22/394 > > Signed-off-by: Maciej Purski Looks good to me. I'll let it sit for Stefan to have a change to look at it though. If it looks like I've forgotten it by early Jan do give me a kick. Thanks, Jonathan > > --- > Changes in v3: > - remove variable current_lsb and calculate it on each read of current > and power scale value > - update comments > > Changes in v2: > - rebase on top of the latest next > - remove a redundant variable - power_lsb_uW > - fix comments > --- > drivers/iio/adc/ina2xx-adc.c | 56 +++++++++++++++++++++----------------------- > 1 file changed, 27 insertions(+), 29 deletions(-) > > diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c > index ddf8781..3488100 100644 > --- a/drivers/iio/adc/ina2xx-adc.c > +++ b/drivers/iio/adc/ina2xx-adc.c > @@ -124,11 +124,11 @@ enum ina2xx_ids { ina219, ina226 }; > > struct ina2xx_config { > u16 config_default; > - int calibration_factor; > + int calibration_value; > int shunt_voltage_lsb; /* nV */ > int bus_voltage_shift; /* position of lsb */ > int bus_voltage_lsb; /* uV */ > - int power_lsb; /* uW */ > + int power_lsb_factor; > enum ina2xx_ids chip_id; > }; > > @@ -149,20 +149,20 @@ struct ina2xx_chip_info { > static const struct ina2xx_config ina2xx_config[] = { > [ina219] = { > .config_default = INA219_CONFIG_DEFAULT, > - .calibration_factor = 40960000, > + .calibration_value = 4096, > .shunt_voltage_lsb = 10000, > .bus_voltage_shift = INA219_BUS_VOLTAGE_SHIFT, > .bus_voltage_lsb = 4000, > - .power_lsb = 20000, > + .power_lsb_factor = 20, > .chip_id = ina219, > }, > [ina226] = { > .config_default = INA226_CONFIG_DEFAULT, > - .calibration_factor = 5120000, > + .calibration_value = 2048, > .shunt_voltage_lsb = 2500, > .bus_voltage_shift = 0, > .bus_voltage_lsb = 1250, > - .power_lsb = 25000, > + .power_lsb_factor = 25, > .chip_id = ina226, > }, > }; > @@ -228,15 +228,17 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev, > return IIO_VAL_FRACTIONAL; > > case INA2XX_POWER: > - /* processed (mW) = raw*lsb (uW) / 1000 */ > - *val = chip->config->power_lsb; > - *val2 = 1000; > + /* processed (mW) = raw * factor * current_lsb (mW)*/ > + *val = chip->config->power_lsb_factor * > + chip->config->shunt_voltage_lsb; > + *val2 = chip->shunt_resistor_uohm; > return IIO_VAL_FRACTIONAL; > > case INA2XX_CURRENT: > - /* processed (mA) = raw (mA) */ > - *val = 1; > - return IIO_VAL_INT; > + /* processed (mA) = raw * lsb ([nV] / [uOhm] = [mA]) */ > + *val = chip->config->shunt_voltage_lsb; > + *val2 = chip->shunt_resistor_uohm; > + return IIO_VAL_FRACTIONAL; > } > > case IIO_CHAN_INFO_HARDWAREGAIN: > @@ -541,25 +543,26 @@ static ssize_t ina2xx_allow_async_readout_store(struct device *dev, > } > > /* > - * Set current LSB to 1mA, shunt is in uOhms > - * (equation 13 in datasheet). We hardcode a Current_LSB > - * of 1.0 x10-3. The only remaining parameter is RShunt. > - * There is no need to expose the CALIBRATION register > - * to the user for now. But we need to reset this register > - * if the user updates RShunt after driver init, e.g upon > - * reading an EEPROM/Probe-type value. > + * Calibration register is set to the best value, which eliminates > + * truncation errors on calculating current register in hardware. > + * According to datasheet (INA 226: eq. 3, INA219: eq. 4) the best values > + * are 2048 for ina226 and 4096 for ina219. They are hardcoded as > + * calibration_value. > */ > static int ina2xx_set_calibration(struct ina2xx_chip_info *chip) > { > - u16 regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor, > - chip->shunt_resistor_uohm); > - > - return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval); > + return regmap_write(chip->regmap, INA2XX_CALIBRATION, > + chip->config->calibration_value); > } > > +/* > + * As the calibration register is fixed, the product of current_lsb > + * and shunt_resistor should also be fixed and equal > + * to shunt_voltage_lsb. Current_lsb will be calculated in read_raw() > + */ > static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val) > { > - if (val <= 0 || val > chip->config->calibration_factor) > + if (val == 0 || val > INT_MAX) > return -EINVAL; > > chip->shunt_resistor_uohm = val; > @@ -592,11 +595,6 @@ static ssize_t ina2xx_shunt_resistor_store(struct device *dev, > if (ret) > return ret; > > - /* Update the Calibration register */ > - ret = ina2xx_set_calibration(chip); > - if (ret) > - return ret; > - > return len; > } >