Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759470AbdLRPV7 (ORCPT ); Mon, 18 Dec 2017 10:21:59 -0500 Received: from mx0a-001b2d01.pphosted.com ([148.163.156.1]:36722 "EHLO mx0a-001b2d01.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759264AbdLRPVt (ORCPT ); Mon, 18 Dec 2017 10:21:49 -0500 From: Frederic Barrat To: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org Cc: arnd@arndb.de, gregkh@linuxfoundation.org, mpe@ellerman.id.au, andrew.donnellan@au1.ibm.com, alastair@au1.ibm.com Subject: [PATCH 03/13] powerpc/powernv: Add opal calls for opencapi Date: Mon, 18 Dec 2017 16:21:16 +0100 X-Mailer: git-send-email 2.14.1 In-Reply-To: References: In-Reply-To: References: X-TM-AS-GCONF: 00 x-cbid: 17121815-0012-0000-0000-0000059A5EE6 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 17121815-0013-0000-0000-000019158567 Message-Id: X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-12-18_11:,, signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 suspectscore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 lowpriorityscore=0 impostorscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1709140000 definitions=main-1712180203 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3097 Lines: 71 Add opal calls to interact with the NPU: OPAL_NPU_SPA_SETUP: set the Shared Process Area (SPA) The SPA is a table containing one entry (Process Element) per memory context which can be accessed by the opencapi device. OPAL_NPU_SPA_CLEAR_CACHE: clear the context cache The NPU keeps a cache of recently accessed memory contexts. When a Process Element is removed from the SPA, the cache for the link must be cleared. OPAL_NPU_TL_SET: configure the Transaction Layer The Transaction Layer specification defines several templates for messages to be exchanged on the link. During link setup, the host and device must negotiate what templates are supported on both sides and at what rates those messages can be sent. Signed-off-by: Frederic Barrat --- arch/powerpc/include/asm/opal-api.h | 5 ++++- arch/powerpc/include/asm/opal.h | 6 ++++++ arch/powerpc/platforms/powernv/opal-wrappers.S | 3 +++ 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h index 233c7504b1f2..24c73f5575ee 100644 --- a/arch/powerpc/include/asm/opal-api.h +++ b/arch/powerpc/include/asm/opal-api.h @@ -201,7 +201,10 @@ #define OPAL_SET_POWER_SHIFT_RATIO 155 #define OPAL_SENSOR_GROUP_CLEAR 156 #define OPAL_PCI_SET_P2P 157 -#define OPAL_LAST 157 +#define OPAL_NPU_SPA_SETUP 159 +#define OPAL_NPU_SPA_CLEAR_CACHE 160 +#define OPAL_NPU_TL_SET 161 +#define OPAL_LAST 161 /* Device tree flags */ diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 0c545f7fc77b..12e70fb58700 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -34,6 +34,12 @@ int64_t opal_npu_init_context(uint64_t phb_id, int pasid, uint64_t msr, uint64_t bdf); int64_t opal_npu_map_lpar(uint64_t phb_id, uint64_t bdf, uint64_t lparid, uint64_t lpcr); +int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t bdfn, + uint64_t addr, uint64_t PE_mask); +int64_t opal_npu_spa_clear_cache(uint64_t phb_id, uint32_t bdfn, + uint64_t PE_handle); +int64_t opal_npu_tl_set(uint64_t phb_id, uint32_t bdfn, long cap, + uint64_t rate_phys, uint32_t size); int64_t opal_console_write(int64_t term_number, __be64 *length, const uint8_t *buffer); int64_t opal_console_read(int64_t term_number, __be64 *length, diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 6f4b00a2ac46..1b2936ba6040 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -320,3 +320,6 @@ OPAL_CALL(opal_set_powercap, OPAL_SET_POWERCAP); OPAL_CALL(opal_get_power_shift_ratio, OPAL_GET_POWER_SHIFT_RATIO); OPAL_CALL(opal_set_power_shift_ratio, OPAL_SET_POWER_SHIFT_RATIO); OPAL_CALL(opal_sensor_group_clear, OPAL_SENSOR_GROUP_CLEAR); +OPAL_CALL(opal_npu_spa_setup, OPAL_NPU_SPA_SETUP); +OPAL_CALL(opal_npu_spa_clear_cache, OPAL_NPU_SPA_CLEAR_CACHE); +OPAL_CALL(opal_npu_tl_set, OPAL_NPU_TL_SET); -- 2.14.1