Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753970AbdLSXbK (ORCPT ); Tue, 19 Dec 2017 18:31:10 -0500 Received: from bastet.se.axis.com ([195.60.68.11]:51537 "EHLO bastet.se.axis.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753905AbdLSXa6 (ORCPT ); Tue, 19 Dec 2017 18:30:58 -0500 From: Niklas Cassel To: Lorenzo Pieralisi , Bjorn Helgaas Cc: Niklas Cassel , linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v6 07/18] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Date: Wed, 20 Dec 2017 00:29:28 +0100 Message-Id: <20171219232940.659-8-niklas.cassel@axis.com> X-Mailer: git-send-email 2.14.2 In-Reply-To: <20171219232940.659-1-niklas.cassel@axis.com> References: <20171219232940.659-1-niklas.cassel@axis.com> X-TM-AS-GCONF: 00 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3616 Lines: 94 Refactor the Kconfig and Makefile handling for host/ep mode, since the previous handling was a bit unorthodox and would have been a bit bloated once more DWC based controllers added support for ep mode. Signed-off-by: Niklas Cassel Acked-by: Kishon Vijay Abraham I --- drivers/pci/dwc/Kconfig | 45 ++++++++++++++++++++++----------------------- drivers/pci/dwc/Makefile | 4 +--- 2 files changed, 23 insertions(+), 26 deletions(-) diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig index 113e09440f85..3954353e3e2e 100644 --- a/drivers/pci/dwc/Kconfig +++ b/drivers/pci/dwc/Kconfig @@ -15,39 +15,38 @@ config PCIE_DW_EP select PCIE_DW config PCI_DRA7XX - bool "TI DRA7xx PCIe controller" - depends on SOC_DRA7XX || COMPILE_TEST - depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT - depends on OF && HAS_IOMEM && TI_PIPE3 - help - Enables support for the PCIe controller in the DRA7xx SoC. There - are two instances of PCIe controller in DRA7xx. This controller can - work either as EP or RC. In order to enable host-specific features - PCI_DRA7XX_HOST must be selected and in order to enable device- - specific features PCI_DRA7XX_EP must be selected. This uses - the DesignWare core. - -if PCI_DRA7XX + bool config PCI_DRA7XX_HOST - bool "PCI DRA7xx Host Mode" - depends on PCI - depends on PCI_MSI_IRQ_DOMAIN + bool "TI DRA7xx PCIe controller Host Mode" + depends on SOC_DRA7XX || COMPILE_TEST + depends on PCI && PCI_MSI_IRQ_DOMAIN + depends on OF && HAS_IOMEM && TI_PIPE3 select PCIE_DW_HOST + select PCI_DRA7XX default y help - Enables support for the PCIe controller in the DRA7xx SoC to work in - host mode. + Enables support for the PCIe controller in the DRA7xx SoC to work in + host mode. There are two instances of PCIe controller in DRA7xx. + This controller can work either as EP or RC. In order to enable + host-specific features PCI_DRA7XX_HOST must be selected and in order + to enable device-specific features PCI_DRA7XX_EP must be selected. + This uses the DesignWare core. config PCI_DRA7XX_EP - bool "PCI DRA7xx Endpoint Mode" + bool "TI DRA7xx PCIe controller Endpoint Mode" + depends on SOC_DRA7XX || COMPILE_TEST depends on PCI_ENDPOINT + depends on OF && HAS_IOMEM && TI_PIPE3 select PCIE_DW_EP + select PCI_DRA7XX help - Enables support for the PCIe controller in the DRA7xx SoC to work in - endpoint mode. - -endif + Enables support for the PCIe controller in the DRA7xx SoC to work in + endpoint mode. There are two instances of PCIe controller in DRA7xx. + This controller can work either as EP or RC. In order to enable + host-specific features PCI_DRA7XX_HOST must be selected and in order + to enable device-specific features PCI_DRA7XX_EP must be selected. + This uses the DesignWare core. config PCIE_DW_PLAT bool "Platform bus based DesignWare PCIe Controller" diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile index 41ba499c96ee..a9d8a6fb48e3 100644 --- a/drivers/pci/dwc/Makefile +++ b/drivers/pci/dwc/Makefile @@ -3,9 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o -ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),) - obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o -endif +obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o -- 2.14.2