Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754165AbdLSXby (ORCPT ); Tue, 19 Dec 2017 18:31:54 -0500 Received: from bastet.se.axis.com ([195.60.68.11]:51601 "EHLO bastet.se.axis.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754100AbdLSXbl (ORCPT ); Tue, 19 Dec 2017 18:31:41 -0500 From: Niklas Cassel To: Kishon Vijay Abraham I , Lorenzo Pieralisi , Bjorn Helgaas , Niklas Cassel , Jesper Nilsson , Jingoo Han , Joao Pinto Cc: linux-omap@vger.kernel.org, linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@axis.com Subject: [PATCH v6 15/18] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Date: Wed, 20 Dec 2017 00:29:36 +0100 Message-Id: <20171219232940.659-16-niklas.cassel@axis.com> X-Mailer: git-send-email 2.14.2 In-Reply-To: <20171219232940.659-1-niklas.cassel@axis.com> References: <20171219232940.659-1-niklas.cassel@axis.com> X-TM-AS-GCONF: 00 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4353 Lines: 111 The current cpu addr fixup mask for ARTPEC-6, GENMASK(27, 0), is wrong. The correct cpu addr fixup mask for ARTPEC-6 is GENMASK(28, 0). However, having a hardcoded cpu addr fixup mask in each driver is arguably wrong. A device tree property called something like "cpu-addr-fixup-mask" would have been a better solution. Introducing such a property is not needed though, since we already have pp->cfg0_base and ep->phys_base, which is derived from already existing device tree properties. It is also worth noting that for ARTPEC-7, hardcoding the cpu addr fixup mask is not possible, since it uses a High Address Bits Look Up Table, which means that it can, at runtime, map the PCIe window to an arbitrary address in the 32-bit address space. By using pp->cfg0_base and ep->phys_base, we avoid hardcoding a mask in each driver. This should work for ARTPEC-6, DRA7xx, and ARTPEC-7. I have not changed the code in DRA7xx though, since their existing code works, but if they want, they could use the same logic as artpec6_pcie_cpu_addr_fixup, and thus remove their hardcoded mask. The reason why the fixup mask is needed is explained in commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address"). Signed-off-by: Niklas Cassel --- drivers/pci/dwc/pci-dra7xx.c | 2 +- drivers/pci/dwc/pcie-artpec6.c | 18 ++++++++++++++---- drivers/pci/dwc/pcie-designware.c | 2 +- drivers/pci/dwc/pcie-designware.h | 2 +- 4 files changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c index 224ff8affdce..89d87844abb3 100644 --- a/drivers/pci/dwc/pci-dra7xx.c +++ b/drivers/pci/dwc/pci-dra7xx.c @@ -110,7 +110,7 @@ static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset, writel(value, pcie->base + offset); } -static u64 dra7xx_pcie_cpu_addr_fixup(u64 pci_addr) +static u64 dra7xx_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr) { return pci_addr & DRA7XX_CPU_TO_BUS_ADDR; } diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c index e7de4e4649eb..318a2bd0d97e 100644 --- a/drivers/pci/dwc/pcie-artpec6.c +++ b/drivers/pci/dwc/pcie-artpec6.c @@ -67,8 +67,6 @@ static const struct of_device_id artpec6_pcie_of_match[]; #define PHY_STATUS 0x118 #define PHY_COSPLLLOCK BIT(0) -#define ARTPEC6_CPU_TO_BUS_ADDR GENMASK(27, 0) - static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset) { u32 val; @@ -82,9 +80,21 @@ static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u regmap_write(artpec6_pcie->regmap, offset, val); } -static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr) +static u64 artpec6_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr) { - return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR; + struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); + struct pcie_port *pp = &pci->pp; + struct dw_pcie_ep *ep = &pci->ep; + + switch (artpec6_pcie->mode) { + case DW_PCIE_RC_TYPE: + return pci_addr - pp->cfg0_base; + case DW_PCIE_EP_TYPE: + return pci_addr - ep->phys_base; + default: + dev_err(pci->dev, "UNKNOWN device type\n"); + } + return pci_addr; } static int artpec6_pcie_establish_link(struct dw_pcie *pci) diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c index 88abdddee2ad..800be7a4f087 100644 --- a/drivers/pci/dwc/pcie-designware.c +++ b/drivers/pci/dwc/pcie-designware.c @@ -149,7 +149,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, u32 retries, val; if (pci->ops->cpu_addr_fixup) - cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr); + cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr); if (pci->iatu_unroll_enabled) { dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr, diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h index 24edac035160..cca5a81c1c74 100644 --- a/drivers/pci/dwc/pcie-designware.h +++ b/drivers/pci/dwc/pcie-designware.h @@ -205,7 +205,7 @@ struct dw_pcie_ep { }; struct dw_pcie_ops { - u64 (*cpu_addr_fixup)(u64 cpu_addr); + u64 (*cpu_addr_fixup)(struct dw_pcie *pcie, u64 cpu_addr); u32 (*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg, size_t size); void (*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg, -- 2.14.2