From: Chunyan Zhang <zhang.chunyan@linaro.org>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Chunyan Zhang <zhang.lyra@gmail.com>
Subject: [PATCH 4/5] drivers: regulator: empty the old suspend functions
Date: Thu, 21 Dec 2017 14:25:05 +0800
Message-Id: <1513837506-26543-5-git-send-email-zhang.chunyan@linaro.org>
In-Reply-To: <1513837506-26543-1-git-send-email-zhang.chunyan@linaro.org>
References: <1513837506-26543-1-git-send-email-zhang.chunyan@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 3701
Lines: 127

Regualtor suspend/resume functions should only be called by PM suspend
core via registering dev_pm_ops, and regulator devices should implement
the callback functions.  Thus, any regulator consumer shouldn't call
the regulator suspend/resume functions directly.

In order to avoid compile errors, two empty functions with the same name
still be left for the time being.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
---
 drivers/regulator/core.c          | 74 ---------------------------------------
 include/linux/regulator/machine.h |  5 ++-
 2 files changed, 2 insertions(+), 77 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 5ea80e9..080c233 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4179,80 +4179,6 @@ void regulator_unregister(struct regulator_dev *rdev)
 }
 EXPORT_SYMBOL_GPL(regulator_unregister);
 
-static int _regulator_suspend_prepare(struct device *dev, void *data)
-{
-	struct regulator_dev *rdev = dev_to_rdev(dev);
-	const suspend_state_t *state = data;
-	int ret;
-
-	mutex_lock(&rdev->mutex);
-	ret = suspend_prepare(rdev, *state);
-	mutex_unlock(&rdev->mutex);
-
-	return ret;
-}
-
-/**
- * regulator_suspend_prepare - prepare regulators for system wide suspend
- * @state: system suspend state
- *
- * Configure each regulator with it's suspend operating parameters for state.
- * This will usually be called by machine suspend code prior to supending.
- */
-int regulator_suspend_prepare(suspend_state_t state)
-{
-	/* ON is handled by regulator active state */
-	if (state == PM_SUSPEND_ON)
-		return -EINVAL;
-
-	return class_for_each_device(&regulator_class, NULL, &state,
-				     _regulator_suspend_prepare);
-}
-EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
-
-static int _regulator_suspend_finish(struct device *dev, void *data)
-{
-	struct regulator_dev *rdev = dev_to_rdev(dev);
-	int ret;
-
-	mutex_lock(&rdev->mutex);
-	if (rdev->use_count > 0  || rdev->constraints->always_on) {
-		if (!_regulator_is_enabled(rdev)) {
-			ret = _regulator_do_enable(rdev);
-			if (ret)
-				dev_err(dev,
-					"Failed to resume regulator %d\n",
-					ret);
-		}
-	} else {
-		if (!have_full_constraints())
-			goto unlock;
-		if (!_regulator_is_enabled(rdev))
-			goto unlock;
-
-		ret = _regulator_do_disable(rdev);
-		if (ret)
-			dev_err(dev, "Failed to suspend regulator %d\n", ret);
-	}
-unlock:
-	mutex_unlock(&rdev->mutex);
-
-	/* Keep processing regulators in spite of any errors */
-	return 0;
-}
-
-/**
- * regulator_suspend_finish - resume regulators from system wide suspend
- *
- * Turn on regulators that might be turned off by regulator_suspend_prepare
- * and that should be turned on according to the regulators properties.
- */
-int regulator_suspend_finish(void)
-{
-	return class_for_each_device(&regulator_class, NULL, NULL,
-				     _regulator_suspend_finish);
-}
-EXPORT_SYMBOL_GPL(regulator_suspend_finish);
 
 /**
  * regulator_has_full_constraints - the system has fully specified constraints
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index e50519f..b4ddb56 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -231,12 +231,12 @@ struct regulator_init_data {
 
 #ifdef CONFIG_REGULATOR
 void regulator_has_full_constraints(void);
-int regulator_suspend_prepare(suspend_state_t state);
-int regulator_suspend_finish(void);
 #else
 static inline void regulator_has_full_constraints(void)
 {
 }
+#endif
+
 static inline int regulator_suspend_prepare(suspend_state_t state)
 {
 	return 0;
@@ -245,6 +245,5 @@ static inline int regulator_suspend_finish(void)
 {
 	return 0;
 }
-#endif
 
 #endif
-- 
2.7.4