Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263590AbTGTIfY (ORCPT ); Sun, 20 Jul 2003 04:35:24 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263597AbTGTIfY (ORCPT ); Sun, 20 Jul 2003 04:35:24 -0400 Received: from astound-64-85-224-253.ca.astound.net ([64.85.224.253]:50191 "EHLO master.linux-ide.org") by vger.kernel.org with ESMTP id S263590AbTGTIfO (ORCPT ); Sun, 20 Jul 2003 04:35:14 -0400 Date: Sun, 20 Jul 2003 01:43:01 -0700 (PDT) From: Andre Hedrick To: Bartlomiej Zolnierkiewicz cc: Stef van der Made , linux-kernel@vger.kernel.org Subject: Re: Onstream DI-30 not responding 2.6 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2258 Lines: 70 Would help but my DI-30 is deadlocked and will not function regardless :-( It is nothing but a paperweight now. Andre Hedrick LAD Storage Consulting Group On Thu, 17 Jul 2003, Bartlomiej Zolnierkiewicz wrote: > > Hi, > > ide-tape driver is broken right now in 2.6. > Config option for it is commented out because > it even doesn't compile (easy to fix). > > I can help a bit if somebody wants to fix this driver. > -- > Bartlomiej > > On Thu, 17 Jul 2003, Stef van der Made wrote: > > > > Hi > > > > I'm trying to use my Onstream DI-30 (IDE) tape device with Kernel > > 2.6.0-test1. When trying to access the drive using the old 2.2 kernels > > and 2.4 these commands worked fine > > > > bash-2.05# mt -f /dev/nht0 status > > /dev/nht0: No such device > > bash-2.05# mt -f /dev/ht0 status > > /dev/ht0: No such device > > bash-2.05# mt -f /dev/hdd status > > /dev/hdd: No such device or address > > bash-2.05# mt -f /dev/hdc status > > /dev/hdc: No such device or address > > > > While they now are showing ugly errors. > > > > This is a part of the boot log > > > > VP_IDE: IDE controller at PCI slot 0000:00:07.1 > > VP_IDE: chipset revision 16 > > VP_IDE: not 100% native mode: will probe irqs later > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1 > > ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA > > ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA > > hda: WDC WD205BA, ATA DISK drive > > anticipatory scheduling elevator > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > hdd: OnStream DI-30, ATAPI TAPE drive > > > > > > Thanks in advance for any tips on a solution for this problem. > > > > Stef > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/