Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753499AbeADOkv (ORCPT + 1 other); Thu, 4 Jan 2018 09:40:51 -0500 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:40530 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753349AbeADOiN (ORCPT ); Thu, 4 Jan 2018 09:38:13 -0500 From: Chen-Yu Tsai To: Maxime Ripard , Russell King , Rob Herring , Mark Rutland Cc: Mylene JOSSERAND , Chen-Yu Tsai , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Nicolas Pitre , Dave Martin Subject: [PATCH v2 1/8] ARM: sun9i: Support SMP on A80 with Multi-Cluster Power Management (MCPM) Date: Thu, 4 Jan 2018 22:37:47 +0800 Message-Id: <20180104143754.2425-2-wens@csie.org> X-Mailer: git-send-email 2.15.1 In-Reply-To: <20180104143754.2425-1-wens@csie.org> References: <20180104143754.2425-1-wens@csie.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: The A80 is a big.LITTLE SoC with 1 cluster of 4 Cortex-A7s and 1 cluster of 4 Cortex-A15s. This patch adds support to bring up the second cluster and thus all cores using the common MCPM code. Core/cluster power down has not been implemented, thus CPU hotplugging and big.LITTLE switcher is not supported. Signed-off-by: Chen-Yu Tsai --- arch/arm/mach-sunxi/Kconfig | 2 + arch/arm/mach-sunxi/Makefile | 1 + arch/arm/mach-sunxi/mcpm.c | 425 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 428 insertions(+) create mode 100644 arch/arm/mach-sunxi/mcpm.c diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 58153cdf025b..53c4e7420cfb 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -47,5 +47,7 @@ config MACH_SUN9I bool "Allwinner (sun9i) SoCs support" default ARCH_SUNXI select ARM_GIC + select MCPM if SMP + select ARM_CCI400_PORT_CTRL if SMP endif diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 27b168f121a1..cd25d9d81257 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_ARCH_SUNXI) += sunxi.o +obj-$(CONFIG_MCPM) += mcpm.o obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-sunxi/mcpm.c b/arch/arm/mach-sunxi/mcpm.c new file mode 100644 index 000000000000..30719998f3f0 --- /dev/null +++ b/arch/arm/mach-sunxi/mcpm.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * arch/arm/mach-sunxi/mcpm.c + * + * Based on arch/arm/mach-exynos/mcpm-exynos.c and Allwinner code + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define SUNXI_CPUS_PER_CLUSTER 4 +#define SUNXI_NR_CLUSTERS 2 + +#define CPUCFG_CX_CTRL_REG0(c) (0x10 * (c)) +#define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(n) BIT(n) +#define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL 0xf +#define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7 BIT(4) +#define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15 BIT(0) +#define CPUCFG_CX_CTRL_REG1(c) (0x10 * (c) + 0x4) +#define CPUCFG_CX_CTRL_REG1_ACINACTM BIT(0) +#define CPUCFG_CX_RST_CTRL(c) (0x80 + 0x4 * (c)) +#define CPUCFG_CX_RST_CTRL_DBG_SOC_RST BIT(24) +#define CPUCFG_CX_RST_CTRL_ETM_RST(n) BIT(20 + (n)) +#define CPUCFG_CX_RST_CTRL_ETM_RST_ALL (0xf << 20) +#define CPUCFG_CX_RST_CTRL_DBG_RST(n) BIT(16 + (n)) +#define CPUCFG_CX_RST_CTRL_DBG_RST_ALL (0xf << 16) +#define CPUCFG_CX_RST_CTRL_H_RST BIT(12) +#define CPUCFG_CX_RST_CTRL_L2_RST BIT(8) +#define CPUCFG_CX_RST_CTRL_CX_RST(n) BIT(4 + (n)) +#define CPUCFG_CX_RST_CTRL_CORE_RST(n) BIT(n) + +#define PRCM_CPU_PO_RST_CTRL(c) (0x4 + 0x4 * (c)) +#define PRCM_CPU_PO_RST_CTRL_CORE(n) BIT(n) +#define PRCM_CPU_PO_RST_CTRL_CORE_ALL 0xf +#define PRCM_PWROFF_GATING_REG(c) (0x100 + 0x4 * (c)) +#define PRCM_PWROFF_GATING_REG_CLUSTER BIT(4) +#define PRCM_PWROFF_GATING_REG_CORE(n) BIT(n) +#define PRCM_PWR_SWITCH_REG(c, cpu) (0x140 + 0x10 * (c) + 0x4 * (cpu)) +#define PRCM_CPU_SOFT_ENTRY_REG 0x164 + +static void __iomem *cpucfg_base; +static void __iomem *prcm_base; + +static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) +{ + struct device_node *node; + int cpu = cluster * SUNXI_CPUS_PER_CLUSTER + core; + + node = of_cpu_device_node_get(cpu); + + /* In case of_cpu_device_node_get fails */ + if (!node) + node = of_get_cpu_node(cpu, NULL); + + if (!node) { + /* + * There's no point in returning an error, since we + * would be mid way in a core or cluster power sequence. + */ + pr_err("%s: Couldn't get CPU cluster %u core %u device node\n", + __func__, cluster, core); + + return false; + } + + return of_device_is_compatible(node, "arm,cortex-a15"); +} + +static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster, + bool enable) +{ + u32 reg; + + /* control sequence from Allwinner A80 user manual v1.2 PRCM section */ + reg = readl(prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); + if (enable) { + if (reg == 0x00) { + pr_debug("power clamp for cluster %u cpu %u already open\n", + cluster, cpu); + return 0; + } + + writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); + udelay(10); + writel(0xfe, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); + udelay(10); + writel(0xf8, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); + udelay(10); + writel(0xf0, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); + udelay(10); + writel(0x00, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); + udelay(10); + } else { + writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); + udelay(10); + } + + return 0; +} + +static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster) +{ + u32 reg; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS) + return -EINVAL; + + /* assert processor power-on reset */ + reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); + reg &= ~PRCM_CPU_PO_RST_CTRL_CORE(cpu); + writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); + + /* Cortex-A7: hold L1 reset disable signal low */ + if (!sunxi_core_is_cortex_a15(cpu, cluster)) { + reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); + reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(cpu); + writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); + } + + /* assert processor related resets */ + reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST(cpu); + + /* + * Allwinner code also asserts resets for NEON on A15. According + * to ARM manuals, asserting power-on reset is sufficient. + */ + if (!sunxi_core_is_cortex_a15(cpu, cluster)) + reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST(cpu); + + writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + + /* open power switch */ + sunxi_cpu_power_switch_set(cpu, cluster, true); + + /* clear processor power gate */ + reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster)); + reg &= ~PRCM_PWROFF_GATING_REG_CORE(cpu); + writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster)); + udelay(20); + + /* de-assert processor power-on reset */ + reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); + reg |= PRCM_CPU_PO_RST_CTRL_CORE(cpu); + writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); + + /* de-assert all processor resets */ + reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + reg |= CPUCFG_CX_RST_CTRL_DBG_RST(cpu); + reg |= CPUCFG_CX_RST_CTRL_CORE_RST(cpu); + if (!sunxi_core_is_cortex_a15(cpu, cluster)) + reg |= CPUCFG_CX_RST_CTRL_ETM_RST(cpu); + else + reg |= CPUCFG_CX_RST_CTRL_CX_RST(cpu); /* NEON */ + writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + + return 0; +} + +static int sunxi_cluster_powerup(unsigned int cluster) +{ + u32 reg; + + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= SUNXI_NR_CLUSTERS) + return -EINVAL; + + /* assert ACINACTM */ + reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); + reg |= CPUCFG_CX_CTRL_REG1_ACINACTM; + writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); + + /* assert cluster processor power-on resets */ + reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); + reg &= ~PRCM_CPU_PO_RST_CTRL_CORE_ALL; + writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); + + /* assert cluster resets */ + reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST; + reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST_ALL; + reg &= ~CPUCFG_CX_RST_CTRL_H_RST; + reg &= ~CPUCFG_CX_RST_CTRL_L2_RST; + + /* + * Allwinner code also asserts resets for NEON on A15. According + * to ARM manuals, asserting power-on reset is sufficient. + */ + if (!sunxi_core_is_cortex_a15(0, cluster)) + reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST_ALL; + + writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + + /* hold L1/L2 reset disable signals low */ + reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); + if (sunxi_core_is_cortex_a15(0, cluster)) { + /* Cortex-A15: hold L2RSTDISABLE low */ + reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15; + } else { + /* Cortex-A7: hold L1RSTDISABLE and L2RSTDISABLE low */ + reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL; + reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7; + } + writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); + + /* clear cluster power gate */ + reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster)); + reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER; + writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster)); + udelay(20); + + /* de-assert cluster resets */ + reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + reg |= CPUCFG_CX_RST_CTRL_DBG_SOC_RST; + reg |= CPUCFG_CX_RST_CTRL_H_RST; + reg |= CPUCFG_CX_RST_CTRL_L2_RST; + writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); + + /* de-assert ACINACTM */ + reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); + reg &= ~CPUCFG_CX_CTRL_REG1_ACINACTM; + writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); + + return 0; +} + +static void sunxi_cpu_cache_disable(void) +{ + /* Disable and flush the local CPU cache. */ + v7_exit_coherency_flush(louis); +} + +/* + * This bit is shared between the initial mcpm_sync_init call to enable + * CCI-400 and proper cluster cache disable before power down. + */ +static void sunxi_cluster_cache_disable_without_axi(void) +{ + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n" + "isb\n" + "dsb" + : : "r" (0x400)); + } + + /* Flush all cache levels for this cluster. */ + v7_exit_coherency_flush(all); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(read_cpuid_mpidr()); +} + +static void sunxi_cluster_cache_disable(void) +{ + unsigned int cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1); + u32 reg; + + pr_debug("%s: cluster %u\n", __func__, cluster); + + sunxi_cluster_cache_disable_without_axi(); + + /* last man standing, assert ACINACTM */ + reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); + reg |= CPUCFG_CX_CTRL_REG1_ACINACTM; + writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); +} + +static const struct mcpm_platform_ops sunxi_power_ops = { + .cpu_powerup = sunxi_cpu_powerup, + .cluster_powerup = sunxi_cluster_powerup, + .cpu_cache_disable = sunxi_cpu_cache_disable, + .cluster_cache_disable = sunxi_cluster_cache_disable, +}; + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + * + * Also enable regional clock gating and L2 data latency settings for + * Cortex-A15. These settings are from the vendor kernel. + */ +static void __naked sunxi_power_up_setup(unsigned int affinity_level) +{ + asm volatile ( + "mrc p15, 0, r1, c0, c0, 0\n" + "movw r2, #" __stringify(ARM_CPU_PART_MASK & 0xffff) "\n" + "movt r2, #" __stringify(ARM_CPU_PART_MASK >> 16) "\n" + "and r1, r1, r2\n" + "movw r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 & 0xffff) "\n" + "movt r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 >> 16) "\n" + "cmp r1, r2\n" + "bne not_a15\n" + + /* The following is Cortex-A15 specific */ + + /* ACTLR2: Enable CPU regional clock gates */ + "mrc p15, 1, r1, c15, c0, 4\n" + "orr r1, r1, #(0x1<<31)\n" + "mcr p15, 1, r1, c15, c0, 4\n" + + /* L2ACTLR */ + "mrc p15, 1, r1, c15, c0, 0\n" + /* Enable L2, GIC, and Timer regional clock gates */ + "orr r1, r1, #(0x1<<26)\n" + /* Disable clean/evict from being pushed to external */ + "orr r1, r1, #(0x1<<3)\n" + "mcr p15, 1, r1, c15, c0, 0\n" + + /* L2CTRL: L2 data RAM latency */ + "mrc p15, 1, r1, c9, c0, 2\n" + "bic r1, r1, #(0x7<<0)\n" + "orr r1, r1, #(0x3<<0)\n" + "mcr p15, 1, r1, c9, c0, 2\n" + + /* End of Cortex-A15 specific setup */ + "not_a15:\n" + + "cmp r0, #1\n" + "bxne lr\n" + "b cci_enable_port_for_self" + ); +} + +static void sunxi_mcpm_setup_entry_point(void) +{ + __raw_writel(virt_to_phys(mcpm_entry_point), + prcm_base + PRCM_CPU_SOFT_ENTRY_REG); +} + +static int __init sunxi_mcpm_init(void) +{ + struct device_node *cpucfg_node, *node; + struct resource res; + int ret; + + if (!of_machine_is_compatible("allwinner,sun9i-a80")) + return -ENODEV; + + if (!cci_probed()) + return -ENODEV; + + node = of_find_compatible_node(NULL, NULL, "allwinner,sun9i-a80-prcm"); + if (!node) + return -ENODEV; + + /* + * Unfortunately we can not request the I/O region for the PRCM. + * It is shared with the PRCM clock. + */ + prcm_base = of_iomap(node, 0); + of_node_put(node); + if (!prcm_base) { + pr_err("%s: failed to map PRCM registers\n", __func__); + return -ENOMEM; + } + + cpucfg_node = of_find_compatible_node(NULL, NULL, + "allwinner,sun9i-a80-cpucfg"); + if (!cpucfg_node) { + ret = -ENODEV; + goto err_unmap_prcm; + } + + cpucfg_base = of_io_request_and_map(cpucfg_node, 0, "sunxi-mcpm"); + if (IS_ERR(cpucfg_base)) { + ret = PTR_ERR(cpucfg_base); + pr_err("%s: failed to map CPUCFG registers: %d\n", + __func__, ret); + goto err_put_cpucfg_node; + } + + ret = mcpm_platform_register(&sunxi_power_ops); + if (!ret) + ret = mcpm_sync_init(sunxi_power_up_setup); + if (!ret) + /* do not disable AXI master as no one will re-enable it */ + ret = mcpm_loopback(sunxi_cluster_cache_disable_without_axi); + if (ret) + goto err_unmap_release_cpucfg; + + /* We don't need the CPUCFG device node anymore */ + of_node_put(cpucfg_node); + + /* Set the hardware entry point address */ + sunxi_mcpm_setup_entry_point(); + + /* Actually enable MCPM */ + mcpm_smp_set_ops(); + + pr_info("sunxi MCPM support installed\n"); + + return ret; + +err_unmap_release_cpucfg: + iounmap(cpucfg_base); + of_address_to_resource(cpucfg_node, 0, &res); + release_mem_region(res.start, resource_size(&res)); +err_put_cpucfg_node: + of_node_put(cpucfg_node); +err_unmap_prcm: + iounmap(prcm_base); + return ret; +} + +early_initcall(sunxi_mcpm_init); -- 2.15.1