From: "Viaris" <bmeneses_beltran@hotmail.com>
To: <linux-kernel@vger.kernel.org>
References: <Law11-OE21KRfcjcMzf0000fbd6@hotmail.com> <20030721170634.GA5633@lsd.di.uminho.pt>
Subject: Re: Problems with kernel 2.5.75 (Urgent)
Date: Mon, 21 Jul 2003 11:25:25 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Message-ID: <Law11-OE55GppWVSQb800010583@hotmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2343
Lines: 70

Hi, I compiled version module-init-tools-0.9.12, I installed this in
/usr/local/sbin and /usr/local/sbin, but I copied manaully (depmod
generate-modprobe.conf  insmod  insmod.static  modinfo  modprobe  rmmod
lsmod) in the directory /sbin, compiled again my kernel and copy bzImage in
/boot I did the image wuth mkinitrd and copy my System.map in /boot ,mynew
kernel boot Ok and load my network card, but no load others modules.

Maybe my is that I did copy of files of module-init manaully, how can I do
it to update automatically?

Thanks,


----- Original Message -----
From: "Luciano Miguel Ferreira Rocha" <luciano@lsd.di.uminho.pt>
To: "Viaris" <bmeneses_beltran@hotmail.com>
Cc: <linux-kernel@vger.kernel.org>
Sent: Monday, July 21, 2003 11:06 AM
Subject: Re: Problems with kernel 2.5.75 (Urgent)


>
> Hi,
>
> Module loading has changed in 2.5.x. Do you have module-init-tools
installed?
>
> You may get it at
http://www.kernel.org/pub/linux/kernel/people/rusty/modules/
>
> Regards,
> Luciano Rocha
>
> On Mon, Jul 21, 2003 at 10:43:25AM -0600, Viaris wrote:
> > Hi all,
> >
> > I compiled kernel version 2.5.75, before I had kernel 2.4.20, the
problem is
> > that I need to enable SCSI DC395x, but when I execute lsmod I not found
> > neither modules loaded, only appear:
> > Module                  Size  Used by
> >
> > If I mount manually a module (insmod
> > /lib/modules/2.5.75/kernel/drivers/scsi/dc395x.ko) the following message
> > appear: Error inserting
> > '/lib/modules/2.5.75/kernel/drivers/scsi/dc395x.ko': -1 Unknown symbol
in
> > module, I have my modules.conf in the directory /lib/modules/2.5.75/ but
> > this kernel no load automatically the modules.
> >
> > I need to load this module because Ineed to use the tape backup, I have
a
> > backu that I need urgent.
> >
> > How can I do it?
> >
> > Thanks,
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/