Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934091AbeAJIWQ (ORCPT + 1 other); Wed, 10 Jan 2018 03:22:16 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:55622 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933984AbeAJIWG (ORCPT ); Wed, 10 Jan 2018 03:22:06 -0500 From: To: , , , , , CC: Subject: [PATCH 1/7] ARM: dts: STi: fix bindings notation Date: Wed, 10 Jan 2018 09:21:01 +0100 Message-ID: <1515572469-19276-2-git-send-email-patrice.chotard@st.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1515572469-19276-1-git-send-email-patrice.chotard@st.com> References: <1515572469-19276-1-git-send-email-patrice.chotard@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.44] X-ClientProxiedBy: SFHDAG1NODE1.st.com (10.75.127.1) To SFHDAG6NODE3.st.com (10.75.127.18) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2018-01-10_04:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: From: Patrice Chotard Remove leading 0x and 0s from bindings notation Add missing unit-address and remove some which are useless. This allows to fix several warnings like : Warning (unit_address_vs_reg): Node XXXX has a reg or ranges property, but no unit name Warning (simple_bus_reg): Node XXXX simple-bus unit address format error, expected "123456" Warning (unit_address_vs_reg): Node XXXX has a unit name, but no reg property Signed-off-by: Patrice Chotard --- arch/arm/boot/dts/stih407-b2120.dts | 2 +- arch/arm/boot/dts/stih407-clock.dtsi | 4 ++-- arch/arm/boot/dts/stih407-family.dtsi | 8 ++++---- arch/arm/boot/dts/stih407-pinctrl.dtsi | 10 +++++----- arch/arm/boot/dts/stih410-b2120.dts | 2 +- arch/arm/boot/dts/stih410-b2260.dts | 4 ++-- arch/arm/boot/dts/stih410-clock.dtsi | 4 ++-- arch/arm/boot/dts/stih410-pinctrl.dtsi | 2 +- arch/arm/boot/dts/stih410.dtsi | 2 +- arch/arm/boot/dts/stih418-b2199.dts | 4 ++-- arch/arm/boot/dts/stih418-clock.dtsi | 4 ++-- arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++-- 12 files changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index c8ad905..cf8bc8a 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -18,7 +18,7 @@ linux,stdout-path = &sbc_serial0; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index d0a24d9..b882dcf 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -83,7 +83,7 @@ * Bootloader initialized system infrastructure clock for * serial devices. */ - clk_ext2f_a9: clockgen-c0@13 { + clk_ext2f_a9: clockgen-c0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <200000000>; @@ -260,7 +260,7 @@ clock-frequency = <0>; }; - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index cf37569..1608c70 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -92,7 +92,7 @@ clocks = <&arm_periph_clk>; }; - l2: cache-controller { + l2: cache-controller@8762000 { compatible = "arm,pl310-cache"; reg = <0x08762000 0x1000>; arm,data-latency = <3 3 3>; @@ -389,7 +389,7 @@ reset-names = "global", "port"; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp { compatible = "st,miphy28lp-phy"; st,syscfg = <&syscfg_core>; #address-cells = <1>; @@ -803,7 +803,7 @@ status = "okay"; }; - st231_gp0: st231-gp0@0 { + st231_gp0: st231-gp0 { compatible = "st,st231-rproc"; memory-region = <&gp0_reserved>; resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; @@ -816,7 +816,7 @@ mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; }; - st231_delta: st231-delta@0 { + st231_delta: st231-delta { compatible = "st,st231-rproc"; memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index a290900..53c6888 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -45,7 +45,7 @@ }; soc { - pin-controller-sbc { + pin-controller-sbc@961f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-sbc-pinctrl"; @@ -369,7 +369,7 @@ }; }; - pin-controller-front0 { + pin-controller-front0@920f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; @@ -929,7 +929,7 @@ }; }; - pin-controller-front1 { + pin-controller-front1@921f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; @@ -962,7 +962,7 @@ }; }; - pin-controller-rear { + pin-controller-rear@922f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-rear-pinctrl"; @@ -1157,7 +1157,7 @@ }; }; - pin-controller-flash { + pin-controller-flash@923f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-flash-pinctrl"; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 9830be5..37a42af 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -18,7 +18,7 @@ linux,stdout-path = &sbc_serial0; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index c663b70..faafc7b 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -19,7 +19,7 @@ linux,stdout-path = &uart1; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -201,7 +201,7 @@ }; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp { phy_port1: port@9b2a000 { st,osc-force-ext; diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index fde5df1..4df1b21 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -85,7 +85,7 @@ * Bootloader initialized system infrastructure clock for * serial devices. */ - clk_ext2f_a9: clockgen-c0@13 { + clk_ext2f_a9: clockgen-c0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <200000000>; @@ -272,7 +272,7 @@ clock-frequency = <0>; }; - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/stih410-pinctrl.dtsi index b3e9dfc..5ae1fd6 100644 --- a/arch/arm/boot/dts/stih410-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih410-pinctrl.dtsi @@ -10,7 +10,7 @@ / { soc { - pin-controller-rear { + pin-controller-rear@922f080 { usb0 { pinctrl_usb0: usb2-0 { diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index cffa50d..07b02a3 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -234,7 +234,7 @@ <&clk_s_d2_quadfs 1>; }; - sti-hqvdp@9c000000 { + sti-hqvdp@9c00000 { compatible = "st,stih407-hqvdp"; reg = <0x9C00000 0x100000>; clock-names = "hqvdp", "pix_main"; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 4e6d915..5418a0e 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -18,7 +18,7 @@ linux,stdout-path = &sbc_serial0; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0xc0000000>; }; @@ -88,7 +88,7 @@ non-removable; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp { phy_port0: port@9b22000 { st,osc-rdy; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index 9a157c1..e68bf28 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -85,7 +85,7 @@ * Bootloader initialized system infrastructure clock for * serial devices. */ - clk_ext2f_a9: clockgen-c0@13 { + clk_ext2f_a9: clockgen-c0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <200000000>; @@ -265,7 +265,7 @@ clock-frequency = <0>; }; - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 7f80c2c..68783e8 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -80,7 +80,7 @@ st,i2c-min-sda-pulse-width-us = <5>; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp { phy_port0: port@9b22000 { st,osc-rdy; @@ -126,7 +126,7 @@ clock-names = "c8sectpfe"; /* tsin0 is TSA on NIMA */ - tsin0: port@0 { + tsin0: port { tsin-num = <0>; serial-not-parallel; i2c-bus = <&ssc2>; -- 1.9.1