Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932546AbeAKGrb (ORCPT + 1 other); Thu, 11 Jan 2018 01:47:31 -0500 Received: from mail-pf0-f194.google.com ([209.85.192.194]:42215 "EHLO mail-pf0-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932292AbeAKGr2 (ORCPT ); Thu, 11 Jan 2018 01:47:28 -0500 X-Google-Smtp-Source: ACJfBosaioB6Nl4jnx9JXdRCogzFMw0gq4c35dNh7AnqnhCDqs3Moz3rulFu0PshxeOQ9p1OEDpAAA== From: "Ji-Ze Hong (Peter Hong)" X-Google-Original-From: "Ji-Ze Hong (Peter Hong)" To: johan@kernel.org Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, peter_hong@fintek.com.tw, "Ji-Ze Hong (Peter Hong)" Subject: [PATCH V3 4/6] usb: serial: f81534: refactoring calc_num_ports() Date: Thu, 11 Jan 2018 14:47:18 +0800 Message-Id: <1515653240-5420-4-git-send-email-hpeter+linux_kernel@gmail.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1515653240-5420-1-git-send-email-hpeter+linux_kernel@gmail.com> References: <1515653240-5420-1-git-send-email-hpeter+linux_kernel@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: In the original code, We'll read configuration in calc_num_ports() and read again in attach(). In fact, we can move all content from attach() to calc_num_ports() to simplify the code. Signed-off-by: Ji-Ze Hong (Peter Hong) --- V3: 1: First introduced in this series patches. drivers/usb/serial/f81534.c | 116 ++++++++++++-------------------------------- 1 file changed, 31 insertions(+), 85 deletions(-) diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index e7dd01310f20..bc0a4bd5dcec 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -753,14 +753,14 @@ static int f81534_find_config_idx(struct usb_serial *serial, u8 *index) static int f81534_calc_num_ports(struct usb_serial *serial, struct usb_serial_endpoints *epds) { + struct f81534_serial_private *serial_priv; struct device *dev = &serial->interface->dev; int size_bulk_in = usb_endpoint_maxp(epds->bulk_in[0]); int size_bulk_out = usb_endpoint_maxp(epds->bulk_out[0]); - u8 setting[F81534_CUSTOM_DATA_SIZE]; - u8 setting_idx; u8 num_port = 0; + int index = 0; int status; - size_t i; + int i; if (size_bulk_out != F81534_WRITE_BUFFER_SIZE || size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) { @@ -768,8 +768,16 @@ static int f81534_calc_num_ports(struct usb_serial *serial, return -ENODEV; } + serial_priv = devm_kzalloc(&serial->interface->dev, + sizeof(*serial_priv), GFP_KERNEL); + if (!serial_priv) + return -ENOMEM; + + usb_set_serial_data(serial, serial_priv); + mutex_init(&serial_priv->urb_mutex); + /* Check had custom setting */ - status = f81534_find_config_idx(serial, &setting_idx); + status = f81534_find_config_idx(serial, &serial_priv->setting_idx); if (status) { dev_err(&serial->interface->dev, "%s: find idx failed: %d\n", __func__, status); @@ -780,11 +788,12 @@ static int f81534_calc_num_ports(struct usb_serial *serial, * We'll read custom data only when data available, otherwise we'll * read default value instead. */ - if (setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) { + if (serial_priv->setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) { status = f81534_read_flash(serial, F81534_CUSTOM_ADDRESS_START + F81534_CONF_OFFSET, - sizeof(setting), setting); + sizeof(serial_priv->conf_data), + serial_priv->conf_data); if (status) { dev_err(&serial->interface->dev, "%s: get custom data failed: %d\n", @@ -794,13 +803,13 @@ static int f81534_calc_num_ports(struct usb_serial *serial, dev_dbg(&serial->interface->dev, "%s: read config from block: %d\n", __func__, - setting_idx); + serial_priv->setting_idx); } else { /* Read default board setting */ status = f81534_read_flash(serial, - F81534_DEF_CONF_ADDRESS_START, F81534_NUM_PORT, - setting); - + F81534_DEF_CONF_ADDRESS_START, + sizeof(serial_priv->conf_data), + serial_priv->conf_data); if (status) { dev_err(&serial->interface->dev, "%s: read failed: %d\n", __func__, @@ -814,7 +823,7 @@ static int f81534_calc_num_ports(struct usb_serial *serial, /* New style, find all possible ports */ for (i = 0; i < F81534_NUM_PORT; ++i) { - if (setting[i] & F81534_PORT_UNAVAILABLE) + if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE) continue; ++num_port; @@ -826,6 +835,17 @@ static int f81534_calc_num_ports(struct usb_serial *serial, num_port = 4; /* Nothing found, oldest version IC */ } + /* Assign phy-to-logic mapping */ + for (i = 0; i < F81534_NUM_PORT; ++i) { + if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE) + continue; + + serial_priv->tty_idx[i] = index++; + dev_dbg(&serial->interface->dev, + "%s: phy_num: %d, tty_idx: %d\n", __func__, i, + serial_priv->tty_idx[i]); + } + /* * Setup bulk-out endpoint multiplexing. All ports share the same * bulk-out endpoint. @@ -1227,79 +1247,6 @@ static void f81534_write_usb_callback(struct urb *urb) } } -static int f81534_attach(struct usb_serial *serial) -{ - struct f81534_serial_private *serial_priv; - int index = 0; - int status; - int i; - - serial_priv = devm_kzalloc(&serial->interface->dev, - sizeof(*serial_priv), GFP_KERNEL); - if (!serial_priv) - return -ENOMEM; - - usb_set_serial_data(serial, serial_priv); - - mutex_init(&serial_priv->urb_mutex); - - /* Check had custom setting */ - status = f81534_find_config_idx(serial, &serial_priv->setting_idx); - if (status) { - dev_err(&serial->interface->dev, "%s: find idx failed: %d\n", - __func__, status); - return status; - } - - /* - * We'll read custom data only when data available, otherwise we'll - * read default value instead. - */ - if (serial_priv->setting_idx == F81534_CUSTOM_NO_CUSTOM_DATA) { - /* - * The default configuration layout: - * byte 0/1/2/3: uart setting - */ - status = f81534_read_flash(serial, - F81534_DEF_CONF_ADDRESS_START, - F81534_DEF_CONF_SIZE, - serial_priv->conf_data); - if (status) { - dev_err(&serial->interface->dev, - "%s: read reserve data failed: %d\n", - __func__, status); - return status; - } - } else { - /* Only read 8 bytes for mode & GPIO */ - status = f81534_read_flash(serial, - F81534_CUSTOM_ADDRESS_START + - F81534_CONF_OFFSET, - sizeof(serial_priv->conf_data), - serial_priv->conf_data); - if (status) { - dev_err(&serial->interface->dev, - "%s: idx: %d get data failed: %d\n", - __func__, serial_priv->setting_idx, - status); - return status; - } - } - - /* Assign phy-to-logic mapping */ - for (i = 0; i < F81534_NUM_PORT; ++i) { - if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE) - continue; - - serial_priv->tty_idx[i] = index++; - dev_dbg(&serial->interface->dev, - "%s: phy_num: %d, tty_idx: %d\n", __func__, i, - serial_priv->tty_idx[i]); - } - - return 0; -} - static void f81534_lsr_worker(struct work_struct *work) { struct f81534_port_private *port_priv; @@ -1543,7 +1490,6 @@ static struct usb_serial_driver f81534_device = { .write = f81534_write, .tx_empty = f81534_tx_empty, .calc_num_ports = f81534_calc_num_ports, - .attach = f81534_attach, .port_probe = f81534_port_probe, .port_remove = f81534_port_remove, .break_ctl = f81534_break_ctl, -- 2.7.4