Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932797AbeALH5L (ORCPT + 1 other); Fri, 12 Jan 2018 02:57:11 -0500 Received: from szxga04-in.huawei.com ([45.249.212.190]:4179 "EHLO huawei.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754586AbeALHyU (ORCPT ); Fri, 12 Jan 2018 02:54:20 -0500 From: Peng Li To: CC: , , , , Subject: [PATCH V2 net-next 04/11] net: hns3: add ethtool_ops.set_coalesce support to PF Date: Fri, 12 Jan 2018 16:23:10 +0800 Message-ID: <1515745397-93865-5-git-send-email-lipeng321@huawei.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1515745397-93865-1-git-send-email-lipeng321@huawei.com> References: <1515745397-93865-1-git-send-email-lipeng321@huawei.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.71.200.31] X-CFilter-Loop: Reflected Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: From: Fuyun Liang This patch adds ethtool_ops.set_coalesce support to PF. Signed-off-by: Fuyun Liang Signed-off-by: Peng Li --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 34 ++++- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 17 +++ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 141 +++++++++++++++++++++ 3 files changed, 188 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 14c7625..32c9f88 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -170,14 +170,40 @@ static void hns3_set_vector_coalesc_gl(struct hns3_enet_tqp_vector *tqp_vector, writel(gl_value, tqp_vector->mask_addr + HNS3_VECTOR_GL2_OFFSET); } -static void hns3_set_vector_coalesc_rl(struct hns3_enet_tqp_vector *tqp_vector, - u32 rl_value) +void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector, + u32 rl_value) { + u32 rl_reg = hns3_rl_usec_to_reg(rl_value); + /* this defines the configuration for RL (Interrupt Rate Limiter). * Rl defines rate of interrupts i.e. number of interrupts-per-second * GL and RL(Rate Limiter) are 2 ways to acheive interrupt coalescing */ - writel(rl_value, tqp_vector->mask_addr + HNS3_VECTOR_RL_OFFSET); + + if (rl_reg > 0 && !tqp_vector->tx_group.gl_adapt_enable && + !tqp_vector->rx_group.gl_adapt_enable) + /* According to the hardware, the range of rl_reg is + * 0-59 and the unit is 4. + */ + rl_reg |= HNS3_INT_RL_ENABLE_MASK; + + writel(rl_reg, tqp_vector->mask_addr + HNS3_VECTOR_RL_OFFSET); +} + +void hns3_set_vector_coalesce_rx_gl(struct hns3_enet_tqp_vector *tqp_vector, + u32 gl_value) +{ + u32 rx_gl_reg = hns3_gl_usec_to_reg(gl_value); + + writel(rx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL0_OFFSET); +} + +void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector, + u32 gl_value) +{ + u32 tx_gl_reg = hns3_gl_usec_to_reg(gl_value); + + writel(tx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET); } static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector) @@ -194,7 +220,7 @@ static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector) /* for now we are disabling Interrupt RL - we * will re-enable later */ - hns3_set_vector_coalesc_rl(tqp_vector, 0); + hns3_set_vector_coalesce_rl(tqp_vector, 0); tqp_vector->rx_group.flow_level = HNS3_FLOW_LOW; tqp_vector->tx_group.flow_level = HNS3_FLOW_LOW; } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index 24f6109..7adbda8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -451,11 +451,15 @@ enum hns3_link_mode_bits { HNS3_LM_COUNT = 15 }; +#define HNS3_INT_GL_MAX 0x1FE0 #define HNS3_INT_GL_50K 0x000A #define HNS3_INT_GL_20K 0x0019 #define HNS3_INT_GL_18K 0x001B #define HNS3_INT_GL_8K 0x003E +#define HNS3_INT_RL_MAX 0x00EC +#define HNS3_INT_RL_ENABLE_MASK 0x40 + struct hns3_enet_ring_group { /* array of pointers to rings */ struct hns3_enet_ring *ring; @@ -595,6 +599,12 @@ static inline void hns3_write_reg(void __iomem *base, u32 reg, u32 value) #define hns3_get_handle(ndev) \ (((struct hns3_nic_priv *)netdev_priv(ndev))->ae_handle) +#define hns3_gl_usec_to_reg(int_gl) (int_gl >> 1) +#define hns3_gl_round_down(int_gl) round_down(int_gl, 2) + +#define hns3_rl_usec_to_reg(int_rl) (int_rl >> 2) +#define hns3_rl_round_down(int_rl) round_down(int_rl, 4) + void hns3_ethtool_set_ops(struct net_device *netdev); int hns3_set_channels(struct net_device *netdev, struct ethtool_channels *ch); @@ -607,6 +617,13 @@ int hns3_clean_rx_ring( struct hns3_enet_ring *ring, int budget, void (*rx_fn)(struct hns3_enet_ring *, struct sk_buff *)); +void hns3_set_vector_coalesce_rx_gl(struct hns3_enet_tqp_vector *tqp_vector, + u32 gl_value); +void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector, + u32 gl_value); +void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector, + u32 rl_value); + #ifdef CONFIG_HNS3_DCB void hns3_dcbnl_setup(struct hnae3_handle *handle); #else diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 81b4b3b..358f780 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -923,6 +923,146 @@ static int hns3_get_coalesce(struct net_device *netdev, return hns3_get_coalesce_per_queue(netdev, 0, cmd); } +static int hns3_check_gl_coalesce_para(struct net_device *netdev, + struct ethtool_coalesce *cmd) +{ + u32 rx_gl, tx_gl; + + if (cmd->rx_coalesce_usecs > HNS3_INT_GL_MAX) { + netdev_err(netdev, + "Invalid rx-usecs value, rx-usecs range is 0-%d\n", + HNS3_INT_GL_MAX); + return -EINVAL; + } + + if (cmd->tx_coalesce_usecs > HNS3_INT_GL_MAX) { + netdev_err(netdev, + "Invalid tx-usecs value, tx-usecs range is 0-%d\n", + HNS3_INT_GL_MAX); + return -EINVAL; + } + + rx_gl = hns3_gl_round_down(cmd->rx_coalesce_usecs); + if (rx_gl != cmd->rx_coalesce_usecs) { + netdev_info(netdev, + "rx_usecs(%d) rounded down to %d, because it must be multiple of 2.\n", + cmd->rx_coalesce_usecs, rx_gl); + } + + tx_gl = hns3_gl_round_down(cmd->tx_coalesce_usecs); + if (tx_gl != cmd->tx_coalesce_usecs) { + netdev_info(netdev, + "tx_usecs(%d) rounded down to %d, because it must be multiple of 2.\n", + cmd->tx_coalesce_usecs, tx_gl); + } + + return 0; +} + +static int hns3_check_rl_coalesce_para(struct net_device *netdev, + struct ethtool_coalesce *cmd) +{ + u32 rl; + + if (cmd->tx_coalesce_usecs_high != cmd->rx_coalesce_usecs_high) { + netdev_err(netdev, + "tx_usecs_high must be same as rx_usecs_high.\n"); + return -EINVAL; + } + + if (cmd->rx_coalesce_usecs_high > HNS3_INT_RL_MAX) { + netdev_err(netdev, + "Invalid usecs_high value, usecs_high range is 0-%d\n", + HNS3_INT_RL_MAX); + return -EINVAL; + } + + rl = hns3_rl_round_down(cmd->rx_coalesce_usecs_high); + if (rl != cmd->rx_coalesce_usecs_high) { + netdev_info(netdev, + "usecs_high(%d) rounded down to %d, because it must be multiple of 4.\n", + cmd->rx_coalesce_usecs_high, rl); + } + + return 0; +} + +static int hns3_check_coalesce_para(struct net_device *netdev, + struct ethtool_coalesce *cmd) +{ + int ret; + + ret = hns3_check_gl_coalesce_para(netdev, cmd); + if (ret) { + netdev_err(netdev, + "Check gl coalesce param fail. ret = %d\n", ret); + return ret; + } + + ret = hns3_check_rl_coalesce_para(netdev, cmd); + if (ret) { + netdev_err(netdev, + "Check rl coalesce param fail. ret = %d\n", ret); + return ret; + } + + if (cmd->use_adaptive_tx_coalesce == 1 || + cmd->use_adaptive_rx_coalesce == 1) { + netdev_info(netdev, + "adaptive-tx=%d and adaptive-rx=%d, tx_usecs or rx_usecs will changed dynamically.\n", + cmd->use_adaptive_tx_coalesce, + cmd->use_adaptive_rx_coalesce); + } + + return 0; +} + +static void hns3_set_coalesce_per_queue(struct net_device *netdev, + struct ethtool_coalesce *cmd, + u32 queue) +{ + struct hns3_enet_tqp_vector *tx_vector, *rx_vector; + struct hns3_nic_priv *priv = netdev_priv(netdev); + struct hnae3_handle *h = priv->ae_handle; + int queue_num = h->kinfo.num_tqps; + + tx_vector = priv->ring_data[queue].ring->tqp_vector; + rx_vector = priv->ring_data[queue_num + queue].ring->tqp_vector; + + tx_vector->tx_group.gl_adapt_enable = cmd->use_adaptive_tx_coalesce; + rx_vector->rx_group.gl_adapt_enable = cmd->use_adaptive_rx_coalesce; + + tx_vector->tx_group.int_gl = cmd->tx_coalesce_usecs; + rx_vector->rx_group.int_gl = cmd->rx_coalesce_usecs; + + hns3_set_vector_coalesce_tx_gl(tx_vector, tx_vector->tx_group.int_gl); + hns3_set_vector_coalesce_rx_gl(rx_vector, rx_vector->rx_group.int_gl); + + hns3_set_vector_coalesce_rl(tx_vector, h->kinfo.int_rl_setting); + hns3_set_vector_coalesce_rl(rx_vector, h->kinfo.int_rl_setting); +} + +static int hns3_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *cmd) +{ + struct hnae3_handle *h = hns3_get_handle(netdev); + u16 queue_num = h->kinfo.num_tqps; + int ret; + int i; + + ret = hns3_check_coalesce_para(netdev, cmd); + if (ret) + return ret; + + h->kinfo.int_rl_setting = + hns3_rl_round_down(cmd->rx_coalesce_usecs_high); + + for (i = 0; i < queue_num; i++) + hns3_set_coalesce_per_queue(netdev, cmd, i); + + return 0; +} + static const struct ethtool_ops hns3vf_ethtool_ops = { .get_drvinfo = hns3_get_drvinfo, .get_ringparam = hns3_get_ringparam, @@ -962,6 +1102,7 @@ static int hns3_get_coalesce(struct net_device *netdev, .get_channels = hns3_get_channels, .set_channels = hns3_set_channels, .get_coalesce = hns3_get_coalesce, + .set_coalesce = hns3_set_coalesce, }; void hns3_ethtool_set_ops(struct net_device *netdev) -- 1.9.1