Date: Mon, 15 Jan 2018 14:58:39 +0000
From: Sudeep Holla <sudeep.holla@arm.com>
To: Jeremy Linton <jeremy.linton@arm.com>
Cc: linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        hanjun.guo@linaro.org, lorenzo.pieralisi@arm.com,
        rjw@rjwysocki.net, will.deacon@arm.com, catalin.marinas@arm.com,
        gregkh@linuxfoundation.org, viresh.kumar@linaro.org,
        mark.rutland@arm.com, linux-kernel@vger.kernel.org,
        linux-pm@vger.kernel.org, jhugo@codeaurora.org,
        wangxiongfeng2@huawei.com, Jonathan.Zhang@cavium.com,
        ahs3@redhat.com, Jayachandran.Nair@cavium.com,
        austinwc@codeaurora.org, lenb@kernel.org, vkilari@codeaurora.org,
        morten.rasmussen@arm.com, Sudeep Holla <sudeep.holla@arm.com>
Subject: Re: [PATCH v6 05/12] ACPI/PPTT: Add Processor Properties Topology
 Table parsing
Message-ID: <20180115145839.GA12531@e107155-lin>
References: <20180113005920.28658-1-jeremy.linton@arm.com>
 <20180113005920.28658-6-jeremy.linton@arm.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20180113005920.28658-6-jeremy.linton@arm.com>
User-Agent: Mutt/1.5.24 (2015-08-30)
Sender: linux-kernel-owner@vger.kernel.org

On Fri, Jan 12, 2018 at 06:59:13PM -0600, Jeremy Linton wrote:
> ACPI 6.2 adds a new table, which describes how processing units
> are related to each other in tree like fashion. Caches are
> also sprinkled throughout the tree and describe the properties
> of the caches in relation to other caches and processing units.
> 
> Add the code to parse the cache hierarchy and report the total
> number of levels of cache for a given core using
> acpi_find_last_cache_level() as well as fill out the individual
> cores cache information with cache_setup_acpi() once the
> cpu_cacheinfo structure has been populated by the arch specific
> code.
> 
> An additional patch later in the set adds the ability to report
> peers in the topology using find_acpi_cpu_topology()
> to report a unique ID for each processing unit at a given level
> in the tree. These unique id's can then be used to match related
> processing units which exist as threads, COD (clusters
> on die), within a given package, etc.
> 
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
>  drivers/acpi/pptt.c | 476 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 476 insertions(+)
>  create mode 100644 drivers/acpi/pptt.c
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> new file mode 100644
> index 000000000000..2c4b3ed862a8
> --- /dev/null
> +++ b/drivers/acpi/pptt.c
> @@ -0,0 +1,476 @@
> +/*
> + * Copyright (C) 2018, ARM
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * This file implements parsing of Processor Properties Topology Table (PPTT)
> + * which is optionally used to describe the processor and cache topology.
> + * Due to the relative pointers used throughout the table, this doesn't
> + * leverage the existing subtable parsing in the kernel.
> + *
> + * The PPTT structure is an inverted tree, with each node potentially
> + * holding one or two inverted tree data structures describing
> + * the caches available at that level. Each cache structure optionally
> + * contains properties describing the cache at a given level which can be
> + * used to override hardware probed values.
> + */
> +#define pr_fmt(fmt) "ACPI PPTT: " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/cacheinfo.h>
> +#include <acpi/processor.h>
> +
> +/* total number of attributes checked by the properties code */
> +#define PPTT_CHECKED_ATTRIBUTES 6

See comment on this below. If we retain this, move it closer to the usage so
that it's easier to understand what it actually stands for.

> +
> +/*
> + * Given the PPTT table, find and verify that the subtable entry
> + * is located within the table
> + */
> +static struct acpi_subtable_header *fetch_pptt_subtable(
> +	struct acpi_table_header *table_hdr, u32 pptt_ref)
> +{
> +	struct acpi_subtable_header *entry;
> +
> +	/* there isn't a subtable at reference 0 */
> +	if (pptt_ref < sizeof(struct acpi_subtable_header))
> +		return NULL;
> +
> +	if (pptt_ref + sizeof(struct acpi_subtable_header) > table_hdr->length)
> +		return NULL;
> +
> +	entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr, pptt_ref);
> +
> +	if (pptt_ref + entry->length > table_hdr->length)
> +		return NULL;
> +
> +	return entry;
> +}
> +
> +static struct acpi_pptt_processor *fetch_pptt_node(
> +	struct acpi_table_header *table_hdr, u32 pptt_ref)
> +{
> +	return (struct acpi_pptt_processor *)fetch_pptt_subtable(table_hdr,
> +								 pptt_ref);
> +}
> +
> +static struct acpi_pptt_cache *fetch_pptt_cache(
> +	struct acpi_table_header *table_hdr, u32 pptt_ref)
> +{
> +	return (struct acpi_pptt_cache *)fetch_pptt_subtable(table_hdr,
> +							     pptt_ref);
> +}
> +
> +static struct acpi_subtable_header *acpi_get_pptt_resource(
> +	struct acpi_table_header *table_hdr,
> +	struct acpi_pptt_processor *node, int resource)
> +{
> +	u32 *ref;
> +
> +	if (resource >= node->number_of_priv_resources)
> +		return NULL;
> +
> +	ref = ACPI_ADD_PTR(u32, node, sizeof(struct acpi_pptt_processor));
> +	ref += resource;
> +
> +	return fetch_pptt_subtable(table_hdr, *ref);
> +}
> +
> +/*
> + * Attempt to find a given cache level, while counting the max number
> + * of cache levels for the cache node.
> + *
> + * Given a pptt resource, verify that it is a cache node, then walk
> + * down each level of caches, counting how many levels are found
> + * as well as checking the cache type (icache, dcache, unified). If a
> + * level & type match, then we set found, and continue the search.
> + * Once the entire cache branch has been walked return its max
> + * depth.
> + */
> +static int acpi_pptt_walk_cache(struct acpi_table_header *table_hdr,
> +				int local_level,
> +				struct acpi_subtable_header *res,
> +				struct acpi_pptt_cache **found,
> +				int level, int type)
> +{
> +	struct acpi_pptt_cache *cache;
> +
> +	if (res->type != ACPI_PPTT_TYPE_CACHE)
> +		return 0;
> +
> +	cache = (struct acpi_pptt_cache *) res;
> +	while (cache) {
> +		local_level++;
> +
> +		if ((local_level == level) &&
> +		    (cache->flags & ACPI_PPTT_CACHE_TYPE_VALID) &&
> +		    ((cache->attributes & ACPI_PPTT_MASK_CACHE_TYPE) == type)) {
> +			if ((*found != NULL) && (cache != *found))
> +				pr_err("Found duplicate cache level/type unable to determine uniqueness\n");
> +
> +			pr_debug("Found cache @ level %d\n", level);
> +			*found = cache;
> +			/*
> +			 * continue looking at this node's resource list
> +			 * to verify that we don't find a duplicate
> +			 * cache node.
> +			 */
> +		}
> +		cache = fetch_pptt_cache(table_hdr, cache->next_level_of_cache);
> +	}
> +	return local_level;
> +}
> +
> +/*
> + * Given a CPU node look for cache levels that exist at this level, and then
> + * for each cache node, count how many levels exist below (logically above) it.
> + * If a level and type are specified, and we find that level/type, abort
> + * processing and return the acpi_pptt_cache structure.
> + */
> +static struct acpi_pptt_cache *acpi_find_cache_level(
> +	struct acpi_table_header *table_hdr,
> +	struct acpi_pptt_processor *cpu_node,
> +	int *starting_level, int level, int type)
> +{
> +	struct acpi_subtable_header *res;
> +	int number_of_levels = *starting_level;
> +	int resource = 0;
> +	struct acpi_pptt_cache *ret = NULL;
> +	int local_level;
> +
> +	/* walk down from processor node */
> +	while ((res = acpi_get_pptt_resource(table_hdr, cpu_node, resource))) {
> +		resource++;
> +
> +		local_level = acpi_pptt_walk_cache(table_hdr, *starting_level,
> +						   res, &ret, level, type);
> +		/*
> +		 * we are looking for the max depth. Since its potentially
> +		 * possible for a given node to have resources with differing
> +		 * depths verify that the depth we have found is the largest.
> +		 */
> +		if (number_of_levels < local_level)
> +			number_of_levels = local_level;
> +	}
> +	if (number_of_levels > *starting_level)
> +		*starting_level = number_of_levels;
> +
> +	return ret;
> +}
> +
> +/*
> + * Given a processor node containing a processing unit, walk into it and count
> + * how many levels exist solely for it, and then walk up each level until we hit
> + * the root node (ignore the package level because it may be possible to have
> + * caches that exist across packages). Count the number of cache levels that
> + * exist at each level on the way up.
> + */
> +static int acpi_process_node(struct acpi_table_header *table_hdr,
> +			     struct acpi_pptt_processor *cpu_node)
> +{
> +	int total_levels = 0;
> +
> +	do {
> +		acpi_find_cache_level(table_hdr, cpu_node, &total_levels, 0, 0);
> +		cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
> +	} while (cpu_node);
> +
> +	return total_levels;
> +}
> +
> +/*
> + * Determine if the *node parameter is a leaf node by iterating the
> + * PPTT table, looking for nodes which reference it.
> + * Return 0 if we find a node referencing the passed node,
> + * or 1 if we don't.
> + */
> +static int acpi_pptt_leaf_node(struct acpi_table_header *table_hdr,
> +			       struct acpi_pptt_processor *node)
> +{
> +	struct acpi_subtable_header *entry;
> +	unsigned long table_end;
> +	u32 node_entry;
> +	struct acpi_pptt_processor *cpu_node;
> +
> +	table_end = (unsigned long)table_hdr + table_hdr->length;
> +	node_entry = ACPI_PTR_DIFF(node, table_hdr);
> +	entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr,
> +			     sizeof(struct acpi_table_pptt));
> +
> +	while ((unsigned long)(entry + 1) < table_end) {

Is entry + 1 check sufficient to access entry of length ?
Shouldn't that be entry + sizeof(struct acpi_pptt_processor *) so that
we are sure it's valid entry ?

> +		cpu_node = (struct acpi_pptt_processor *)entry;
> +		if ((entry->type == ACPI_PPTT_TYPE_PROCESSOR) &&
> +		    (cpu_node->parent == node_entry))
> +			return 0;
> +		entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
> +				     entry->length);
> +	}
> +	return 1;
> +}
> +
> +/*
> + * Find the subtable entry describing the provided processor.
> + * This is done by iterating the PPTT table looking for processor nodes
> + * which have an acpi_processor_id that matches the acpi_cpu_id parameter
> + * passed into the function. If we find a node that matches this criteria
> + * we verify that its a leaf node in the topology rather than depending
> + * on the valid flag, which doesn't need to be set for leaf nodes.
> + */
> +static struct acpi_pptt_processor *acpi_find_processor_node(
> +	struct acpi_table_header *table_hdr,
> +	u32 acpi_cpu_id)
> +{
> +	struct acpi_subtable_header *entry;
> +	unsigned long table_end;
> +	struct acpi_pptt_processor *cpu_node;
> +
> +	table_end = (unsigned long)table_hdr + table_hdr->length;
> +	entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr,
> +			     sizeof(struct acpi_table_pptt));
> +
> +	/* find the processor structure associated with this cpuid */
> +	while ((unsigned long)(entry + 1) < table_end) {

Same comment as above on entry + 1.

> +		cpu_node = (struct acpi_pptt_processor *)entry;
> +
> +		if (entry->length == 0) {
> +			pr_err("Invalid zero length subtable\n");
> +			break;
> +		}
> +		if ((entry->type == ACPI_PPTT_TYPE_PROCESSOR) &&
> +		    (acpi_cpu_id == cpu_node->acpi_processor_id) &&
> +		     acpi_pptt_leaf_node(table_hdr, cpu_node)) {
> +			return (struct acpi_pptt_processor *)entry;
> +		}
> +
> +		entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
> +				     entry->length);
> +	}
> +
> +	return NULL;
> +}
> +
> +static int acpi_find_cache_levels(struct acpi_table_header *table_hdr,
> +				  u32 acpi_cpu_id)
> +{
> +	int number_of_levels = 0;
> +	struct acpi_pptt_processor *cpu;
> +
> +	cpu = acpi_find_processor_node(table_hdr, acpi_cpu_id);
> +	if (cpu)
> +		number_of_levels = acpi_process_node(table_hdr, cpu);
> +
> +	return number_of_levels;
> +}
> +
> +/* Convert the linux cache_type to a ACPI PPTT cache type value */
> +static u8 acpi_cache_type(enum cache_type type)
> +{

[nit] Just wondering if we can avoid this with some static mapping:

static u8 acpi_cache_type[] = {
        [CACHE_TYPE_NONE] = 0,
        [CACHE_TYPE_DATA] = ACPI_PPTT_CACHE_TYPE_DATA,
        [CACHE_TYPE_INST] = ACPI_PPTT_CACHE_TYPE_INSTR,
        [CACHE_TYPE_UNIFIED] = ACPI_PPTT_CACHE_TYPE_UNIFIED,
};

> +	switch (type) {
> +	case CACHE_TYPE_DATA:
> +		pr_debug("Looking for data cache\n");
> +		return ACPI_PPTT_CACHE_TYPE_DATA;
> +	case CACHE_TYPE_INST:
> +		pr_debug("Looking for instruction cache\n");
> +		return ACPI_PPTT_CACHE_TYPE_INSTR;
> +	default:
> +	case CACHE_TYPE_UNIFIED:
> +		pr_debug("Looking for unified cache\n");
> +		/*
> +		 * It is important that ACPI_PPTT_CACHE_TYPE_UNIFIED
> +		 * contains the bit pattern that will match both
> +		 * ACPI unified bit patterns because we use it later
> +		 * to match both cases.
> +		 */
> +		return ACPI_PPTT_CACHE_TYPE_UNIFIED;
> +	}
> +}
> +
> +/* find the ACPI node describing the cache type/level for the given CPU */
> +static struct acpi_pptt_cache *acpi_find_cache_node(
> +	struct acpi_table_header *table_hdr, u32 acpi_cpu_id,
> +	enum cache_type type, unsigned int level,
> +	struct acpi_pptt_processor **node)
> +{
> +	int total_levels = 0;
> +	struct acpi_pptt_cache *found = NULL;
> +	struct acpi_pptt_processor *cpu_node;
> +	u8 acpi_type = acpi_cache_type(type);
> +
> +	pr_debug("Looking for CPU %d's level %d cache type %d\n",
> +		 acpi_cpu_id, level, acpi_type);
> +
> +	cpu_node = acpi_find_processor_node(table_hdr, acpi_cpu_id);
> +
> +	while ((cpu_node) && (!found)) {
> +		found = acpi_find_cache_level(table_hdr, cpu_node,
> +					      &total_levels, level, acpi_type);
> +		*node = cpu_node;
> +		cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
> +	}
> +
> +	return found;
> +}
> +
> +/*
> + * The ACPI spec implies that the fields in the cache structures are used to
> + * extend and correct the information probed from the hardware. In the case
> + * of arm64 the CCSIDR probing has been removed because it might be incorrect.

Though ARM64 is only user now, it may get obsolete, so better to drop that
comment.

> + */
> +static void update_cache_properties(struct cacheinfo *this_leaf,
> +				    struct acpi_pptt_cache *found_cache,
> +				    struct acpi_pptt_processor *cpu_node)
> +{
> +	int valid_flags = 0;
> +
> +	if (found_cache->flags & ACPI_PPTT_SIZE_PROPERTY_VALID) {
> +		this_leaf->size = found_cache->size;
> +		valid_flags++;
> +	}
> +	if (found_cache->flags & ACPI_PPTT_LINE_SIZE_VALID) {
> +		this_leaf->coherency_line_size = found_cache->line_size;
> +		valid_flags++;
> +	}
> +	if (found_cache->flags & ACPI_PPTT_NUMBER_OF_SETS_VALID) {
> +		this_leaf->number_of_sets = found_cache->number_of_sets;
> +		valid_flags++;
> +	}
> +	if (found_cache->flags & ACPI_PPTT_ASSOCIATIVITY_VALID) {
> +		this_leaf->ways_of_associativity = found_cache->associativity;
> +		valid_flags++;
> +	}
> +	if (found_cache->flags & ACPI_PPTT_WRITE_POLICY_VALID) {
> +		switch (found_cache->attributes & ACPI_PPTT_MASK_WRITE_POLICY) {
> +		case ACPI_PPTT_CACHE_POLICY_WT:
> +			this_leaf->attributes = CACHE_WRITE_THROUGH;
> +			break;
> +		case ACPI_PPTT_CACHE_POLICY_WB:
> +			this_leaf->attributes = CACHE_WRITE_BACK;
> +			break;
> +		}
> +		valid_flags++;
> +	}
> +	if (found_cache->flags & ACPI_PPTT_ALLOCATION_TYPE_VALID) {
> +		switch (found_cache->attributes & ACPI_PPTT_MASK_ALLOCATION_TYPE) {
> +		case ACPI_PPTT_CACHE_READ_ALLOCATE:
> +			this_leaf->attributes |= CACHE_READ_ALLOCATE;
> +			break;
> +		case ACPI_PPTT_CACHE_WRITE_ALLOCATE:
> +			this_leaf->attributes |= CACHE_WRITE_ALLOCATE;
> +			break;
> +		case ACPI_PPTT_CACHE_RW_ALLOCATE:
> +		case ACPI_PPTT_CACHE_RW_ALLOCATE_ALT:
> +			this_leaf->attributes |=
> +				CACHE_READ_ALLOCATE | CACHE_WRITE_ALLOCATE;
> +			break;
> +		}
> +		valid_flags++;
> +	}
> +	/*
> +	 * If all the above flags are valid, and the cache type is NOCACHE
> +	 * update the cache type as well.
> +	 */

I am not sure if it makes sense to mandate at least last 2 (read allocate
and write policy). They can be optional.

> +	if ((this_leaf->type == CACHE_TYPE_NOCACHE) &&
> +	    (valid_flags == PPTT_CHECKED_ATTRIBUTES))
> +		this_leaf->type = CACHE_TYPE_UNIFIED;
> +}
> +
> +/*
> + * Update the kernel cache information for each level of cache
> + * associated with the given acpi cpu.
> + */
> +static void cache_setup_acpi_cpu(struct acpi_table_header *table,
> +				 unsigned int cpu)
> +{
> +	struct acpi_pptt_cache *found_cache;
> +	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
> +	u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
> +	struct cacheinfo *this_leaf;
> +	unsigned int index = 0;
> +	struct acpi_pptt_processor *cpu_node = NULL;
> +
> +	while (index < get_cpu_cacheinfo(cpu)->num_leaves) {
> +		this_leaf = this_cpu_ci->info_list + index;
> +		found_cache = acpi_find_cache_node(table, acpi_cpu_id,
> +						   this_leaf->type,
> +						   this_leaf->level,
> +						   &cpu_node);
> +		pr_debug("found = %p %p\n", found_cache, cpu_node);
> +		if (found_cache)
> +			update_cache_properties(this_leaf,
> +						found_cache,
> +						cpu_node);

[nit] unnecessary line break ?

> +
> +		index++;
> +	}
> +}
> +
> +/**
> + * acpi_find_last_cache_level() - Determines the number of cache levels for a PE

[nit] PE ? I think you mean processing element, but that's too ARM ARM thingy
:), can you s/PE/CPU ?

> + * @cpu: Kernel logical cpu number
> + *
> + * Given a logical cpu number, returns the number of levels of cache represented
> + * in the PPTT. Errors caused by lack of a PPTT table, or otherwise, return 0
> + * indicating we didn't find any cache levels.
> + *
> + * Return: Cache levels visible to this core.
> + */
> +int acpi_find_last_cache_level(unsigned int cpu)
> +{
> +	u32 acpi_cpu_id;
> +	struct acpi_table_header *table;
> +	int number_of_levels = 0;
> +	acpi_status status;
> +
> +	pr_debug("Cache Setup find last level cpu=%d\n", cpu);
> +
> +	acpi_cpu_id = get_acpi_id_for_cpu(cpu);
> +	status = acpi_get_table(ACPI_SIG_PPTT, 0, &table);
> +	if (ACPI_FAILURE(status)) {
> +		pr_err_once("No PPTT table found, cache topology may be inaccurate\n");
> +	} else {
> +		number_of_levels = acpi_find_cache_levels(table, acpi_cpu_id);
> +		acpi_put_table(table);
> +	}
> +	pr_debug("Cache Setup find last level level=%d\n", number_of_levels);
> +
> +	return number_of_levels;
> +}
> +
> +/**
> + * cache_setup_acpi() - Override CPU cache topology with data from the PPTT

[nit]			  ^^^^ may be override/setup or just setup ?

> + * @cpu: Kernel logical cpu number

[nit] kernel is implicit, no ?

--
Regards,
Sudeep