Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751794AbeAPKNx (ORCPT + 1 other); Tue, 16 Jan 2018 05:13:53 -0500 Received: from mail.free-electrons.com ([62.4.15.54]:43921 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751124AbeAPKNC (ORCPT ); Tue, 16 Jan 2018 05:13:02 -0500 From: Alexandre Belloni To: James Hogan , Ralf Baechle Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, Alexandre Belloni Subject: [PATCH v3 5/8] MIPS: mscc: add ocelot dtsi Date: Tue, 16 Jan 2018 11:12:37 +0100 Message-Id: <20180116101240.5393-6-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 2.15.1 In-Reply-To: <20180116101240.5393-1-alexandre.belloni@free-electrons.com> References: <20180116101240.5393-1-alexandre.belloni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: Add a device tree include file for the Microsemi Ocelot SoC. Signed-off-by: Alexandre Belloni --- arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/mscc/Makefile | 4 ++ arch/mips/boot/dts/mscc/ocelot.dtsi | 110 ++++++++++++++++++++++++++++++++++++ 3 files changed, 115 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/Makefile create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index e2c6f131c8eb..1e79cab8e269 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -4,6 +4,7 @@ subdir-y += cavium-octeon subdir-y += img subdir-y += ingenic subdir-y += lantiq +subdir-y += mscc subdir-y += mti subdir-y += netlogic subdir-y += ni diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile new file mode 100644 index 000000000000..f0a155a74e02 --- /dev/null +++ b/arch/mips/boot/dts/mscc/Makefile @@ -0,0 +1,4 @@ +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi new file mode 100644 index 000000000000..b2f936e1fbb9 --- /dev/null +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -0,0 +1,110 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* Copyright (c) 2017 Microsemi Corporation */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,ocelot"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <250000000>; + + cpu@0 { + compatible = "mscc,ocelot"; + device_type = "cpu"; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + }; + + cpuintc: interrupt-controller@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x70000000 0x2000000>; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@0 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x0 0x2c>; + }; + + intc: interrupt-controller@70 { + compatible = "mscc,ocelot-icpu-intr"; + reg = <0x70 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + uart2: serial@100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + reset@1070008 { + compatible = "mscc,ocelot-chip-reset"; + reg = <0x1070008 0x4>; + }; + + gpio: pinctrl@1070034 { + compatible = "mscc,ocelot-pinctrl"; + reg = <0x1070034 0x68>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + uart_pins: uart-pins { + pins = "GPIO_6", "GPIO_7"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_12", "GPIO_13"; + function = "uart2"; + }; + }; + }; +}; -- 2.15.1