Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   oscardagrach <ryan@edited.us>
Cc:     oscardagrach <ryan@edited.us>, Wei Xu <xuwei5@hisilicon.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will.deacon@arm.com>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: hikey: Enable HS200 mode on eMMC
Date:   Wed, 17 Jan 2018 14:35:30 -0600
Message-Id: <20180117203531.17152-1-ryan@edited.us>
To:     unlisted-recipients:; (no To-header on input)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

According to the hi6220 datasheet, the MMC controller is JEDEC eMMC 4.5
compliant, in addition to supporting a clock of up to 150MHz. The Hikey
schematic also indicates the device utilizes 1.8v signaling. Define these
parameters in the device tree to enable HS200 mode.

Signed-off-by: Ryan Grachek <ryan@edited.us>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 3aee6123d161..964e43e05ac6 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -299,7 +299,9 @@
 		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
 
 		dwmmc_0: dwmmc0@f723d000 {
+			max-frequency = <150000000>;
 			cap-mmc-highspeed;
+			mmc-hs200-1_8v;
 			non-removable;
 			bus-width = <0x8>;
 			vmmc-supply = <&ldo19>;
-- 
2.11.0