Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Philipp Rossak <embed3d@gmail.com>
To:     lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
        maxime.ripard@free-electrons.com, wens@csie.org,
        linux@armlinux.org.uk, jic23@kernel.org, knaack.h@gmx.de,
        lars@metafoo.de, pmeerw@pmeerw.net, davem@davemloft.net,
        hans.verkuil@cisco.com, mchehab@kernel.org, rask@formelder.dk,
        clabbe.montjoie@gmail.com, sean@mess.org, krzk@kernel.org,
        quentin.schulz@free-electrons.com, icenowy@aosc.io,
        edu.molinas@gmail.com, singhalsimran0@gmail.com
Cc:     linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-sunxi@googlegroups.com
Subject: [PATCH 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T
Date:   Fri, 26 Jan 2018 16:19:41 +0100
Message-Id: <20180126151941.12183-17-embed3d@gmail.com>
In-Reply-To: <20180126151941.12183-1-embed3d@gmail.com>
References: <20180126151941.12183-1-embed3d@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patch adds the thermal zones to the A83T. Sensor 0 is located in the
cpu cluster 0. Sensor 1 is located in cluster 1 and Sensor 3 is located
in the gpu.

Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 9e53ff5ac4ed..4259a8726031 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -747,4 +747,24 @@
 			#size-cells = <0>;
 		};
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
 };
-- 
2.11.0