Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Stefan Mavrodiev <stefan@olimex.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Russell King <linux@armlinux.org.uk>,
        Maxime Ripard <maxime.ripard@free-electrons.com>,
        Chen-Yu Tsai <wens@csie.org>,
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-arm-kernel@lists.infradead.org (moderated list:ARM PORT),
        linux-kernel@vger.kernel.org (open list)
Cc:     linux-sunxi@googlegroups.com, Stefan Mavrodiev <stefan@olimex.com>
Subject: [PATCH v2 1/2] ARM: dts: sunxi: Add Olimex A20-SOM204-EVB board
Date:   Mon, 29 Jan 2018 15:56:39 +0200
Message-Id: <1517234202-1892-1-git-send-email-stefan@olimex.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This is new System-On-Module platform with universal dimm socket for
easy insertation. The EVB board is designed to be universal with
future modules. Product page is located here [1].

There are two dts files - one for base model and another for eMMC variant.

Base features of A20-SOM204 board includes:
	* 1GB DDR3 RAM
	* AXP209 PMU
	* KSZ9031 Gigabit PHY
	* AT24C16 EEPROM
	* Status LED
	* LCD connector
	* GPIO connector

There will be variants with the following options:
	* Second LAN8710A Megabit PHY
	* 16MB SPI Flash memory
	* eMMC card
	* ATECC508 crypto device

The EVB board has:
	* Debug UART
	* MicroSD card connector
	* USB-OTG connector
	* Two USB host
	* RTL8723BS WiFi/BT combo
	* IrDA transceiver/receiver
	* HDMI connector
	* VGA connector
	* Megabit ethernet transceiver
	* Gigabit ethernet transceiver
	* SATA connector
	* CAN driver
	* CSI camera
	* MIC and HP connectors
	* PCIe x4 connector
	* USB3 connector
	* Two UEXT connectors
	* Two user LEDs

Some of the features are multiplexed and cannot be used the same time:
CAN and Megabit PHY. Others are not usable with A20 SoC: PCIe and USB3.

[1] https://www.olimex.com/Products/SOM204/

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
 Changes for v2:
  - Replace license header with SPDX-License-Identifier
  - Removed useless pinctrl child nodes
  - Removed dual reset for RTL8723BS:
      Bluetooth reset will be performed in userspace
  - Renamed all leds with same prefix
  - Removed duplicate nodes with eMMC dts
  - Removed IR_TX pin
  - Add some comm

 arch/arm/boot/dts/Makefile                        |   1 +
 arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 335 ++++++++++++++++++++++
 2 files changed, 336 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..d88f04d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -918,6 +918,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-lime2-emmc.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
new file mode 100644
index 0000000..eae8e26
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A20-SOM204-EVB";
+	compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		ethernet1 = &rtl8723bs;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		stat {
+			label = "a20-som204-evb:green:stat";
+			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led1 {
+			label = "a20-som204-evb:green:led1";
+			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led2 {
+			label = "a20-som204-evb:yellow:led2";
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtl_pwrseq: rtl_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy3>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_vcc3v3>;
+
+	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Exposed to UEXT1 */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Exposed to UEXT2 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&rtl_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bt_uart_pins: bt_uart_pins@0 {
+		pins = "PG6", "PG7", "PG8";
+		function = "uart3";
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>,
+		    <&spi1_cs0_pins_a>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>,
+		    <&spi2_cs0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+/* Used for RTL8723BS bluetooth */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_uart_pins>;
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
-- 
2.7.4