Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S271717AbTG2N3n (ORCPT ); Tue, 29 Jul 2003 09:29:43 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S271728AbTG2N3n (ORCPT ); Tue, 29 Jul 2003 09:29:43 -0400 Received: from firewall.mdc-dayton.com ([12.161.103.180]:2787 "EHLO firewall.mdc-dayton.com") by vger.kernel.org with ESMTP id S271717AbTG2N3L (ORCPT ); Tue, 29 Jul 2003 09:29:11 -0400 From: "Kathy Frazier" To: Cc: Subject: RE: Problems related to DMA or DDR memory on Intel 845 chipset? Date: Tue, 29 Jul 2003 09:40:35 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Importance: Normal In-Reply-To: <20030728202845.GA10304@www.13thfloor.at> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24856 Lines: 493 >so there is some device attached to what? which uses >DMA transfers (busmaster?) to receive/send data from/to >memory, and after your device 'thinks' the dma is done, >it asserts an interrupt, which sometimes gets lost? We are attached to some industrial equipment. Yes, DMA busmaster. Yes, the device asserts it's interrupt. At some point things get totally hosed and that interrupt never gets through. We then have to reset the machine . . . >this would suggest that your external hardware is >broken, maybe the signal is to weak or not within >the requiered timing parameters ... . . . sounds likely. We are investigating this further. >> . . . Meanwhile, I made another discovery on the internet that indicates >> that DMA is not supported with an ICH4 controller (which is what this system >sorry, you are mixing up completely different things ... >UDMA is a transfer mode used by IDE, which is referred on >this page. Thanks. A couple of others have responded similarly. >does your device use the IDE interface and compy to >at least ATA/33, then UDMA is something which should >be of concern to you ... Nope, we don't use the IDE interface. >please try to describe the setup more technically, because >otherwise it is not possible to say anything ... We are using the ASUS P4PE MoBo (chipsets: Intel 82845PE MCH and Intel 82801DB ICH4). FSB: 533 MHz Below you'll find additional info on the system. Please let me know what additional information you might need. Thanks! Kathy Results of lpci: 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 02) 00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF 02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 02:05.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) 02:09.0 Communication controller: Altera Corporation PCI Fiber Optic Engrave Interface (rev 02) The following is from the messages file: Jul 22 04:11:45 rti10 syslogd 1.4.1: restart. Jul 22 03:02:05 rti10 modprobe: modprobe: Can't locate module char-major-188 Jul 22 03:04:25 rti10 kernel: hda: dma_intr: status=0x50 { DriveReady SeekComplete } Jul 22 03:16:05 rti10 modprobe: modprobe: Can't locate module char-major-188 Jul 22 03:16:25 rti10 kernel: Jul 22 03:21:05 rti10 modprobe: modprobe: Can't locate module char-major-188 Jul 22 03:23:05 rti10 kernel: hdc: lost interrupt Jul 22 03:27:45 rti10 modprobe: modprobe: Can't locate module char-major-188 Jul 22 03:29:45 rti10 kernel: hdc: lost interrupt Jul 22 03:34:25 rti10 cups: cupsd startup succeeded Jul 22 08:22:27 rti10 syslogd 1.4.1: restart. Jul 22 08:22:27 rti10 syslog: syslogd startup succeeded Jul 22 08:22:27 rti10 kernel: klogd 1.4.1, log source = /proc/kmsg started. Jul 22 08:22:27 rti10 kernel: Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Jul 22 08:22:27 rti10 kernel: BIOS-provided physical RAM map: Jul 22 08:22:27 rti10 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Jul 22 08:22:27 rti10 kernel: 0MB HIGHMEM available. Jul 22 08:22:27 rti10 kernel: 511MB LOWMEM available. Jul 22 08:22:27 rti10 kernel: On node 0 totalpages: 131052 Jul 22 08:22:27 rti10 kernel: zone(0): 4096 pages. Jul 22 08:22:27 rti10 kernel: zone(1): 126956 pages. Jul 22 08:22:27 rti10 kernel: zone(2): 0 pages. Jul 22 08:22:27 rti10 kernel: Kernel command line: ro root=LABEL=/ Jul 22 08:22:27 rti10 kernel: Initializing CPU#0 Jul 22 08:22:27 rti10 kernel: Detected 2405.482 MHz processor. Jul 22 08:22:27 rti10 kernel: Console: colour VGA+ 80x25 Jul 22 08:22:27 rti10 kernel: Calibrating delay loop... 4797.23 BogoMIPS Jul 22 08:22:27 rti10 kernel: Memory: 511336k/524208k available (1347k kernel code, 10308k reserved, 999k data, 132k init, 0k highmem) Jul 22 08:22:27 rti10 kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Jul 22 08:22:27 rti10 kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Jul 22 08:22:27 rti10 kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) Jul 22 08:22:27 rti10 kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 22 08:22:27 rti10 kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 22 08:22:27 rti10 syslog: klogd startup succeeded Jul 22 08:22:27 rti10 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Jul 22 08:22:27 rti10 kernel: CPU: L2 cache: 512K Jul 22 08:22:27 rti10 kernel: Intel machine check architecture supported. Jul 22 08:22:27 rti10 kernel: Intel machine check reporting enabled on CPU#0. Jul 22 08:22:27 rti10 portmap: portmap startup succeeded Jul 22 08:22:27 rti10 kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Jul 22 08:22:28 rti10 kernel: Enabling fast FPU save and restore... done. Jul 22 08:22:28 rti10 nfslock: rpc.statd startup succeeded Jul 22 08:22:28 rti10 kernel: Enabling unmasked SIMD FPU exception support... done. Jul 22 08:22:28 rti10 rpc.statd[3174]: Version 1.0.1 Starting Jul 22 08:22:28 rti10 kernel: Checking 'hlt' instruction... OK. Jul 22 08:22:28 rti10 keytable: Jul 22 08:22:28 rti10 kernel: POSIX conformance testing by UNIFIX Jul 22 08:22:28 rti10 keytable: Loading system font: Jul 22 08:22:28 rti10 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Jul 22 08:22:28 rti10 kernel: mtrr: detected mtrr type: Intel Jul 22 08:22:28 rti10 kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1e50, last bus=2 Jul 22 08:22:28 rti10 kernel: PCI: Using configuration type 1 Jul 22 08:22:28 rti10 kernel: PCI: Probing PCI hardware Jul 22 08:22:28 rti10 kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Jul 22 08:22:28 rti10 kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge Jul 22 08:22:28 rti10 kernel: PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 Jul 22 08:22:28 rti10 kernel: isapnp: Scanning for PnP cards... Jul 22 08:22:28 rti10 kernel: isapnp: No Plug & Play device found Jul 22 08:22:28 rti10 kernel: Linux NET4.0 for Linux 2.4 Jul 22 08:22:28 rti10 kernel: Based upon Swansea University Computer Society NET3.039 Jul 22 08:22:28 rti10 kernel: Initializing RT netlink socket Jul 22 08:22:28 rti10 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Jul 22 08:22:28 rti10 kernel: Starting kswapd Jul 22 08:22:28 rti10 kernel: VFS: Disk quotas vdquot_6.5.1 Jul 22 08:22:28 rti10 kernel: pty: 2048 Unix98 ptys configured Jul 22 08:22:28 rti10 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled Jul 22 08:22:28 rti10 kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A Jul 22 08:22:28 rti10 kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A Jul 22 08:22:28 rti10 keytable: Jul 22 08:22:28 rti10 kernel: Real Time Clock Driver v1.10e Jul 22 08:22:28 rti10 rc: Starting keytable: succeeded Jul 22 08:22:28 rti10 kernel: Floppy drive(s): fd0 is 1.44M Jul 22 08:22:28 rti10 kernel: FDC 0 is a post-1991 82077 Jul 22 08:22:28 rti10 kernel: NET4: Frame Diverter 0.46 Jul 22 08:22:28 rti10 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Jul 22 08:22:28 rti10 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 Jul 22 08:22:28 rti10 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jul 22 08:22:28 rti10 kernel: ICH4: IDE controller at PCI slot 00:1f.1 Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 11 for device 00:1f.1 Jul 22 08:22:28 rti10 kernel: PCI: Sharing IRQ 11 with 00:1d.2 Jul 22 08:22:28 rti10 kernel: ICH4: chipset revision 2 Jul 22 08:22:28 rti10 kernel: ICH4: not 100%% native mode: will probe irqs later Jul 22 08:22:28 rti10 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio Jul 22 08:22:28 rti10 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Jul 22 08:22:28 rti10 kernel: hda: ST340016A, ATA DISK drive Jul 22 08:22:28 rti10 kernel: blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff) Jul 22 08:22:28 rti10 kernel: hdc: FX54++W, ATAPI CD/DVD-ROM drive Jul 22 08:22:28 rti10 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jul 22 08:22:28 rti10 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jul 22 08:22:28 rti10 kernel: hda: host protected area => 1 Jul 22 08:22:28 rti10 kernel: hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Jul 22 08:22:28 rti10 kernel: ide-floppy driver 0.99.newide Jul 22 08:22:28 rti10 kernel: Partition check: Jul 22 08:22:28 rti10 kernel: hda: hda1 hda2 hda3 Jul 22 08:22:28 rti10 kernel: ide-floppy driver 0.99.newide Jul 22 08:22:28 rti10 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jul 22 08:22:28 rti10 kernel: md: Autodetecting RAID arrays. Jul 22 08:22:28 rti10 random: Initializing random number generator: succeeded Jul 22 08:22:28 rti10 kernel: md: autorun ... Jul 22 08:22:28 rti10 kernel: md: ... autorun DONE. Jul 22 08:22:28 rti10 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Jul 22 08:22:28 rti10 kernel: IP Protocols: ICMP, UDP, TCP, IGMP Jul 22 08:22:28 rti10 kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes Jul 22 08:22:28 rti10 kernel: TCP: Hash tables configured (established 32768 bind 65536) Jul 22 08:22:28 rti10 kernel: Linux IP multicast router 0.06 plus PIM-SM Jul 22 08:22:28 rti10 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Jul 22 08:22:28 rti10 kernel: RAMDISK: Compressed image found at block 0 Jul 22 08:22:28 rti10 kernel: Freeing initrd memory: 146k freed Jul 22 08:22:28 rti10 kernel: VFS: Mounted root (ext2 filesystem). Jul 22 08:22:28 rti10 kernel: Journalled Block Device driver loaded Jul 22 08:22:28 rti10 kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Jul 22 08:22:28 rti10 kernel: EXT3-fs: write access will be enabled during recovery. Jul 22 08:22:28 rti10 kernel: kjournald starting. Commit interval 5 seconds Jul 22 08:22:28 rti10 kernel: EXT3-fs: ide0(3,2): orphan cleanup on readonly fs Jul 22 08:22:28 rti10 rc: Starting pcmcia: succeeded Jul 22 08:22:28 rti10 netfs: Mounting other filesystems: succeeded Jul 22 08:22:28 rti10 kernel: EXT3-fs: ide0(3,2): 4 orphan inodes deleted Jul 22 08:22:28 rti10 aksparlnx: Loading Aladdin HASP/Hardlock driver: Jul 22 08:22:28 rti10 kernel: EXT3-fs: recovery complete. Jul 22 08:22:28 rti10 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jul 22 08:22:28 rti10 kernel: Freeing unused kernel memory: 132k freed Jul 22 08:22:28 rti10 kernel: usb.c: registered new driver usbdevfs Jul 22 08:22:28 rti10 kernel: usb.c: registered new driver hub Jul 22 08:22:28 rti10 kernel: usb-uhci.c: $Revision: 1.275 $ time 17:59:01 Mar 13 2003 Jul 22 08:22:28 rti10 kernel: usb-uhci.c: High bandwidth mode enabled Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 5 for device 00:1d.0 Jul 22 08:22:28 rti10 kernel: PCI: Sharing IRQ 5 with 01:00.0 Jul 22 08:22:28 rti10 kernel: usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 5 Jul 22 08:22:28 rti10 kernel: usb-uhci.c: Detected 2 ports Jul 22 08:22:28 rti10 kernel: usb.c: new USB bus registered, assigned bus number 1 Jul 22 08:22:28 rti10 kernel: hub.c: USB hub found Jul 22 08:22:28 rti10 kernel: hub.c: 2 ports detected Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 5 for device 00:1d.1 Jul 22 08:22:28 rti10 kernel: usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5 Jul 22 08:22:28 rti10 kernel: usb-uhci.c: Detected 2 ports Jul 22 08:22:28 rti10 kernel: usb.c: new USB bus registered, assigned bus number 2 Jul 22 08:22:28 rti10 kernel: hub.c: USB hub found Jul 22 08:22:28 rti10 kernel: hub.c: 2 ports detected Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 11 for device 00:1d.2 Jul 22 08:22:28 rti10 kernel: PCI: Sharing IRQ 11 with 00:1f.1 Jul 22 08:22:28 rti10 kernel: usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 11 Jul 22 08:22:28 rti10 kernel: usb-uhci.c: Detected 2 ports Jul 22 08:22:28 rti10 kernel: usb.c: new USB bus registered, assigned bus number 3 Jul 22 08:22:28 rti10 kernel: hub.c: USB hub found Jul 22 08:22:28 rti10 kernel: hub.c: 2 ports detected Jul 22 08:22:28 rti10 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 9 for device 00:1d.7 Jul 22 08:22:28 rti10 kernel: ehci-hcd 00:1d.7: Intel Corp. 82801DB USB EHCI Controller Jul 22 08:22:28 rti10 kernel: ehci-hcd 00:1d.7: irq 9, pci mem e0851000 Jul 22 08:22:29 rti10 kernel: usb.c: new USB bus registered, assigned bus number 4 Jul 22 08:22:29 rti10 kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA Jul 22 08:22:29 rti10 kernel: PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. Jul 22 08:22:29 rti10 kernel: PCI: 00:1d.7 PCI cache line size corrected to 128. Jul 22 08:22:29 rti10 kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 Jul 22 08:22:29 rti10 kernel: hub.c: USB hub found Jul 22 08:22:29 rti10 kernel: hub.c: 6 ports detected Jul 22 08:22:29 rti10 kernel: usb.c: registered new driver hiddev Jul 22 08:22:29 rti10 kernel: usb.c: registered new driver hid Jul 22 08:22:29 rti10 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik Jul 22 08:22:29 rti10 kernel: hid-core.c: USB HID support drivers Jul 22 08:22:29 rti10 kernel: mice: PS/2 mouse device common for all mice Jul 22 08:22:29 rti10 kernel: hub.c: connect-debounce failed, port 2 disabled Jul 22 08:22:29 rti10 kernel: hub.c: new USB device 00:1d.2-2, assigned address 2 Jul 22 08:22:29 rti10 kernel: usb.c: USB device 2 (vend/prod 0x529/0x1) is not claimed by any active driver. Jul 22 08:22:29 rti10 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Jul 22 08:22:29 rti10 kernel: Adding Swap: 1044216k swap-space (priority -1) Jul 22 08:22:29 rti10 aksparlnx: Warning: kernel-module version mismatch Jul 22 08:22:29 rti10 kernel: kjournald starting. Commit interval 5 seconds Jul 22 08:22:29 rti10 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Jul 22 08:22:29 rti10 aksparlnx: ^I/opt/aksparlnx/drv/2.4.19/aksparlnx.o was compiled for kernel version 2.4.19 Jul 22 08:22:29 rti10 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jul 22 08:22:29 rti10 aksparlnx: ^Iwhile this kernel is version 2.4.20-8 Jul 22 08:22:29 rti10 kernel: ohci1394: $Rev: 693 $ Ben Collins Jul 22 08:22:29 rti10 aksparlnx: Warning: loading /opt/aksparlnx/drv/2.4.19/aksparlnx.o will taint the kernel: non-GPL license - Copyright 1999-2002 Aladdin Knowledge Systems. Jul 22 08:22:29 rti10 kernel: PCI: Found IRQ 11 for device 02:03.0 Jul 22 08:22:29 rti10 aksparlnx: See http://www.tux.org/lkml/#export-tainted for information about tainted modules Jul 22 08:22:29 rti10 kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f2000000-f20007ff] Max Packet=[2048] Jul 22 08:22:29 rti10 aksparlnx: Warning: loading /opt/aksparlnx/drv/2.4.19/aksparlnx.o will taint the kernel: forced load Jul 22 08:22:29 rti10 kernel: ieee1394: SelfID completion called outside of bus reset! Jul 22 08:22:29 rti10 aksparlnx: Module aksparlnx loaded, with warnings Jul 22 08:22:29 rti10 kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] Jul 22 08:22:29 rti10 kernel: ip_tables: (C) 2000-2002 Netfilter core team Jul 22 08:22:29 rti10 kernel: Broadcom 4401 Ethernet Driver bcm4400 ver. 1.0.1 (08/26/02) Jul 22 08:22:29 rti10 kernel: PCI: Found IRQ 11 for device 02:05.0 Jul 22 08:22:29 rti10 aksparlnx: Jul 22 08:22:29 rti10 kernel: eth0: Broadcom BCM4401 100Base-T found at mem f1800000, IRQ 11, node addr 00e018ff35ec Jul 22 08:22:29 rti10 rc: Starting aksparlnx: succeeded Jul 22 08:22:29 rti10 kernel: ip_tables: (C) 2000-2002 Netfilter core team Jul 22 08:22:29 rti10 kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] Jul 22 08:22:29 rti10 kernel: aksparlnx: EYE/HASP driver v1.05/API v3.81/major 60 loaded (ppi) Jul 22 08:22:29 rti10 apmd[3251]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16) Jul 22 08:22:29 rti10 apmd: apmd startup succeeded Jul 22 08:22:29 rti10 aksusbd[3263]: loaded, daemon version: 1.5, key API (USB) version: 3.81, key API (parallel) version: 3.81 Jul 22 08:22:29 rti10 aksusbd: aksusbd startup succeeded Jul 22 08:22:29 rti10 automount[3315]: starting automounter version 3.1.7, path = /home, maptype = file, mapname = /etc/auto.home Jul 22 08:22:29 rti10 autofs: automount startup succeeded Jul 22 08:22:29 rti10 kernel: bcm4400: eth0 NIC Link is Up, 100 Mbps full duplex Jul 22 08:22:29 rti10 automount[3315]: using kernel protocol version 3 Jul 22 08:22:25 rti10 network: Setting network parameters: succeeded Jul 22 08:22:25 rti10 network: Bringing up loopback interface: succeeded Jul 22 08:22:29 rti10 sshd: succeeded Jul 22 08:22:30 rti10 apmd[3251]: Charge: * * * (-1% unknown) Jul 22 08:22:31 rti10 xinetd[3343]: xinetd Version 2.3.10 started with libwrap options compiled in. Jul 22 08:22:31 rti10 xinetd[3343]: Started working: 2 available services Jul 22 08:22:31 rti10 kernel: NETDEV WATCHDOG: eth0: transmit timed out Jul 22 08:22:33 rti10 xinetd: xinetd startup succeeded Jul 22 08:22:33 rti10 exportfs[3352]: No 'sync' or 'async' option specified for export "*:/export/home". Assuming default behaviour ('sync'). NOTE: this default has changed from previous versions Jul 22 08:22:33 rti10 exportfs: exportfs: No 'sync' or 'async' option specified for export "*:/export/home". Jul 22 08:22:33 rti10 exportfs: Assuming default behaviour ('sync'). Jul 22 08:22:33 rti10 exportfs: NOTE: this default has changed from previous versions Jul 22 08:22:33 rti10 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Jul 22 08:22:33 rti10 nfs: Starting NFS services: succeeded Jul 22 08:22:33 rti10 nfs: rpc.rquotad startup succeeded Jul 22 08:22:33 rti10 nfs: rpc.nfsd startup succeeded Jul 22 08:22:33 rti10 nfs: rpc.mountd startup succeeded Jul 22 08:22:33 rti10 vsftpd: true startup succeeded Jul 22 08:22:33 rti10 amd[3396]: switched to logfile "syslog" Jul 22 08:22:33 rti10 amd[3396]: AM-UTILS VERSION INFORMATION: Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1997-2003 Erez Zadok Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1990 Jan-Simon Pendry Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1990 Imperial College of Science, Technology & Medicine Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1990 The Regents of the University of California. Jul 22 08:22:33 rti10 amd[3396]: am-utils version 6.0.9 (build 1). Jul 22 08:22:33 rti10 amd[3396]: Built by root@sylvester.devel.redhat.com on date Tue Feb 4 05:46:40 EST 2003. Jul 22 08:22:33 rti10 amd[3396]: cpu=i386 (little-endian), arch=i386, karch=i686. Jul 22 08:22:33 rti10 amd[3396]: full_os=linux, os=linux, osver=2.4.20-2.25smp, vendor=redhat. Jul 22 08:22:33 rti10 amd[3396]: Map support for: root, passwd, hesiod, ldap, union, nisplus, nis, ndbm, file, error. Jul 22 08:22:33 rti10 amd[3396]: AMFS: nfs, link, nfsx, nfsl, host, linkx, program, union, inherit, ufs, Jul 22 08:22:33 rti10 amd[3396]: lofs, cdfs, auto, direct, toplvl, error. Jul 22 08:22:33 rti10 amd: Jul 22 08:22:33 rti10 amd[3396]/info: using configuration file /etc/amd.conf Jul 22 08:22:33 rti10 amd[3396]: FS: iso9660, lofs, nfs, nfs3, tmpfs, ext2. Jul 22 08:22:33 rti10 amd[3396]: Network: wire="192.9.200.0" (netnumber=192.9.200). Jul 22 08:22:33 rti10 amd[3396]: My ip addr is 192.9.200.239 Jul 22 08:22:33 rti10 amd[3397]: released controlling tty using setsid() Jul 22 08:22:33 rti10 amd[3397]: file server localhost, type local, state starts up Jul 22 08:22:33 rti10 amd[3397]: /dev/hda2 restarted fstype link on / Jul 22 08:22:33 rti10 amd[3397]: none restarted fstype link on /proc Jul 22 08:22:33 rti10 amd[3397]: usbdevfs restarted fstype link on /proc/bus/usb Jul 22 08:22:33 rti10 amd[3397]: /dev/hda1 restarted fstype link on /boot Jul 22 08:22:33 rti10 amd[3397]: none restarted fstype link on /dev/pts Jul 22 08:22:33 rti10 amd[3397]: none restarted fstype link on /dev/shm Jul 22 08:22:33 rti10 amd[3397]: automount(pid3315) restarted fstype link on /home Jul 22 08:22:33 rti10 amd: amd startup succeeded Jul 22 08:22:33 rti10 amd[3397]: initializing amd.conf map /etc/amd.net of type file Jul 22 08:22:33 rti10 oeeclslinuxrti: Starting Linux Collage RTI drivers: Jul 22 08:22:33 rti10 amd[3397]: first time load of map /etc/amd.net succeeded Jul 22 08:22:33 rti10 amd[3397]: /etc/amd.net mounted fstype toplvl on /net Jul 22 08:22:33 rti10 oeeclslinuxrti: Installing Parallel Port Driver Jul 22 08:22:33 rti10 oeeclslinuxrti: insmod: pp: no module by that name found Jul 22 08:22:34 rti10 oeeclslinuxrti: Using /lib/modules/2.4.20-8/kernel/drivers/ieee1394/ieee1394.o Jul 22 08:22:34 rti10 oeeclslinuxrti: insmod: a module named ieee1394 already exists Jul 22 08:22:34 rti10 kernel: raw1394: /dev/raw1394 device initialized Jul 22 08:22:34 rti10 oeeclslinuxrti: Using /lib/modules/2.4.20-8/kernel/drivers/ieee1394/raw1394.o Jul 22 08:22:34 rti10 oeeclslinuxrti: mknod: `/dev/pp0': File exists Jul 22 08:22:34 rti10 rc: Starting oeeclslinuxrti: succeeded Jul 22 08:22:34 rti10 sendmail: sendmail startup succeeded Jul 22 08:22:34 rti10 sendmail: sm-client startup succeeded Jul 22 08:22:35 rti10 gpm: gpm startup succeeded Jul 22 08:22:37 rti10 httpd: httpd startup succeeded Jul 22 08:22:38 rti10 canna: succeeded Jul 22 08:22:38 rti10 crond: crond startup succeeded Jul 22 08:22:40 rti10 kernel: lp0: using parport0 (polling). Jul 22 08:22:40 rti10 kernel: lp0: console ready Jul 22 08:22:40 rti10 modprobe: modprobe: Can't locate module char-major-188 Jul 22 08:22:40 rti10 last message repeated 15 times Jul 22 08:22:40 rti10 cups: cupsd startup succeeded Jul 22 08:22:41 rti10 xfs: xfs startup succeeded Jul 22 08:22:41 rti10 anacron: anacron startup succeeded Jul 22 08:22:41 rti10 atd: atd startup succeeded Jul 22 08:22:42 rti10 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/cyrillic (unreadable) Jul 22 08:22:42 rti10 rc: Starting firstboot: succeeded Jul 22 08:22:42 rti10 automount[3315]: attempting to mount entry /home/cls Jul 22 08:22:42 rti10 rc: Starting mdc_misc: succeeded Jul 22 08:22:42 rti10 login(pam_unix)[3649]: session opened for user cls by LOGIN(uid=0) Jul 22 08:22:42 rti10 automount[3315]: attempting to mount entry /home/clshome Jul 22 08:22:42 rti10 -- cls[3649]: LOGIN ON tty1 BY cls Jul 22 08:22:49 rti10 gconfd (cls-3723): starting (version 2.2.0), pid 3723 user 'cls' Jul 22 08:22:49 rti10 gconfd (cls-3723): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0 Jul 22 08:22:49 rti10 gconfd (cls-3723): Resolved address "xml:readwrite:/home/clshome/.gconf" to a writable config source at position 1 Jul 22 08:22:49 rti10 gconfd (cls-3723): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2 Jul 22 08:22:55 rti10 kernel: ide-floppy driver 0.99.newide Jul 22 08:22:55 rti10 kernel: hdc: ATAPI 54X CD-ROM drive, 128kB Cache, UDMA(33) Jul 22 08:22:55 rti10 kernel: Uniform CD-ROM driver Revision: 3.12 Jul 22 08:22:57 rti10 kernel: cdrom: This disc doesn't have any tracks I recognize! Jul 22 08:23:59 rti10 automount[3816]: expired /home/cls Jul 22 08:24:01 rti10 su(pam_unix)[3815]: session opened for user root by cls(uid=301) Thanks, Kathy - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/