Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Enric Balletbo i Serra <enric.balletbo@collabora.com>
To:     Daniel Thompson <daniel.thompson@linaro.org>,
        Doug Anderson <dianders@google.com>,
        Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>
Cc:     Jingoo Han <jingoohan1@gmail.com>,
        Richard Purdie <rpurdie@rpsys.net>,
        Jacek Anaszewski <jacek.anaszewski@gmail.com>,
        Brian Norris <briannorris@google.com>,
        Guenter Roeck <groeck@google.com>,
        Lee Jones <lee.jones@linaro.org>,
        Alexandru Stan <amstan@google.com>, linux-leds@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        kernel@collabora.com
Subject: [PATCH v3 4/4] dt-bindings: pwm-backlight: move brightness-levels to optional.
Date:   Thu,  8 Feb 2018 12:30:32 +0100
Message-Id: <20180208113032.27810-5-enric.balletbo@collabora.com>
In-Reply-To: <20180208113032.27810-1-enric.balletbo@collabora.com>
References: <20180208113032.27810-1-enric.balletbo@collabora.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The patch 'backlight: pwm_bl: compute brightness of LED linearly to
human eye' introduced a default brightness-levels table that is used
when brightness-levels is not available in the dts. So move
brightness-levels and default-brightness-level to be optional.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
---
Changes since v2:
- Add Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Changes since v1:
- Fix a couple of typos as requested by Rob.
  - s/availablel/available/
  - s/move move/move/
  - "so move..." should be a new sentence.
- Add Reviewed-by: Rob Herring <robh@kernel.org>

 .../devicetree/bindings/leds/backlight/pwm-backlight.txt  | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
index ce9b5746b774..64fa2fbd98c9 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
@@ -3,13 +3,6 @@ pwm-backlight bindings
 Required properties:
   - compatible: "pwm-backlight"
   - pwms: OF device-tree PWM specification (see PWM binding[0])
-  - brightness-levels: Array of distinct brightness levels. Typically these
-      are in the range from 0 to 255, but any range starting at 0 will do.
-      The actual brightness level (PWM duty cycle) will be interpolated
-      from these values. 0 means a 0% duty cycle (darkest/off), while the
-      last value in the array represents a 100% duty cycle (brightest).
-  - default-brightness-level: the default brightness level (index into the
-      array defined by the "brightness-levels" property)
   - power-supply: regulator for supply voltage
 
 Optional properties:
@@ -21,6 +14,14 @@ Optional properties:
                           and enabling the backlight using GPIO.
   - pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO
                       and setting PWM value to 0.
+  - brightness-levels: Array of distinct brightness levels. Typically these
+                       are in the range from 0 to 255, but any range starting at
+                       0 will do. The actual brightness level (PWM duty cycle)
+                       will be interpolated from these values. 0 means a 0% duty
+                       cycle (darkest/off), while the last value in the array
+                       represents a 100% duty cycle (brightest).
+  - default-brightness-level: The default brightness level (index into the
+                              array defined by the "brightness-levels" property).
   - num-interpolated-steps: Number of interpolated steps between each value
                             of brightness-levels table. This way a high
                             resolution pwm duty cycle can be used without
-- 
2.15.1