Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 9 Mar 2001 15:13:32 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 9 Mar 2001 15:12:58 -0500 Received: from mta5.rcsntx.swbell.net ([151.164.30.29]:35238 "EHLO mta5.rcsntx.swbell.net") by vger.kernel.org with ESMTP id ; Fri, 9 Mar 2001 15:12:41 -0500 Date: Fri, 09 Mar 2001 14:13:32 -0600 From: Erik DeBill Subject: Re: Linux 2.4.2ac12 and ac13 breaks usb-visor In-Reply-To: <20010308160758.A16296@kroah.com>; from greg@kroah.com on Thu, Mar 08, 2001 at 04:07:58PM -0800 To: Greg KH Cc: linux-kernel@vger.kernel.org Message-id: <20010309141332.A29339@austin.rr.com> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010307172056.A8647@austin.rr.com> <20010307173640.A14818@kroah.com> <20010308140103.A17993@austin.rr.com> <20010308160758.A16296@kroah.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Mar 08, 2001 at 04:07:58PM -0800, Greg KH wrote: > > Hmm... I was compiling usb-uhci and uhci directly into the kernel, > > then visor.o as a module. > > You shouldn't be able to compile both usb-uhci and uhci into the kernel, > unless you tweak your .config file by hand. Build 2 kernels, reboot and test with each one. Makes testing things slow, but it's my usual config. I'll probably change that to either all static or all modules after this, but didn't want to change methods in mid-testing. > What is the oops from when things crash? no oops. Things just freeze when the module unloads. The cursor quits flashing, nothing responds, I can't ping it... > Have you tried enabling debugging on the usb-serial drivers and looking > at what the visor driver spits out to the kernel debug log? I'd be > interested in seeing that. Nothing. I've got the following in /etc/syslog.conf (which I believe SHOULD be correct), but I get absolutely nothing. *.=debug;\ auth,authpriv.none;\ news.none;mail.none /var/log/debug > Since you are reporting problems with a clean 2.4.2 kernel, I don't > think that the 1 line patch in ac12 is the cause of your problem. Probably not. Something in that patch DOES take it from "the device won't work for some things" to "the device can crash my system", though. Neither is good, but one's a bit worse :-) > What kind of hardware is this? Athlon 800, VIA 82c686a chipset (KT133), MSI K7T Pro motherboard. Visor Deluxe. > What compiler? gcc 2.95.2 > What version of modutils? modutils 2.4.2 and hotplug scripts from CVS a couple months back. > What is your .config? see below. > Do you have any other USB devices that work properly (or not) in this > system? Unfortunately, no. I can try getting one, (usb mouse, perhaps? they're cheap..) but I have no real use for any additional hardware. > Have you tried resetting your Visor? Yep. Hard reset and reinstall most of my software/data > > If uhci + visor is unsupported, might I suggest the following change > > to Configure.help to warn people? > > I've considered it, but I keep hoping that JE is going to fix the uhci > driver some day soon :) > > There are other drivers that also do not work with the uhci.o driver do > to this bug. We need to document it, though. Am I the only person who gets nervous watching e2fsck repair errors on my root filesystem? I've gotten to see that waayyy too many times while looking at this bug. Until it's documented this is a landmine. JE is the default USB driver, so you can bet that a great many people will be using it (even though it's described as "alternate"). Once it's fixed we just pull the warning from Config.help. This is the first time I've ever run across something like this in Linux that wasn't at least labelled "experimental". Perhaps I've been leading a sheltered life. In any case, I really appreciate you looking into this. Thanks, Erik --------------------------------- my dmesg output: (note, IRQ conflicts have never cause problems before, and getting rid of them requires several hours of fighting with lose2k. I've been there, done that, and it's not fun... M$ doesn't like my AGP, video and sound. If at all possible I just want to leave it alone) Linux version 2.4.2-ac16 (edebill@hagbard) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #5 Fri Mar 9 13:17:01 CST 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000017ef0000 @ 0000000000100000 (usable) BIOS-e820: 0000000000003000 @ 0000000017ff0000 (ACPI NVS) BIOS-e820: 000000000000d000 @ 0000000017ff3000 (ACPI data) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) On node 0 totalpages: 98288 zone(0): 4096 pages. zone(1): 94192 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda2 ide0=ata66 id0=autotune hda=autotune hdc=autotune mem=393152K ide_setup: ide0=ata66 ide_setup: hda=autotune ide_setup: hdc=autotune Initializing CPU#0 Detected 800.035 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1595.80 BogoMIPS Memory: 384088k/393152k available (1281k kernel code, 8676k reserved, 364k data, 216k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Bus master Pipeline request disabled PCI: Bursting cornercase bug worked around Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV16 framebuffer ver 0.9.2a (GeForce2-GTS, 32MB @ 0xD0000000) pty: 256 Unix98 ptys configured block: queued sectors max/low 254861kB/123789kB, 768 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 VP_IDE: ATA-66/100 forced bit set (WARNING)!! ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio hda: ST330630A, ATA DISK drive hdc: DVDROM 8X, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=3720/255/63, UDMA(66) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others PCI: Found IRQ 11 for device 00:0d.0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:50:8B:13:1A:39, IRQ 11. Receiver lock-up bug exists -- enabling work-around. Board assembly 692290-005, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 321M agpgart: Detected Via Apollo Pro KT133 chipset agpgart: AGP aperture is 32M @ 0xd8000000 [drm] AGP 0.99 on VIA Apollo KT133 @ 0xd8000000 32MB [drm] Initialized tdfx 1.0.0 20000928 on minor 63 [drm] AGP 0.99 on VIA Apollo KT133 @ 0xd8000000 32MB [drm] Initialized radeon 1.0.0 20010105 on minor 62 Creative EMU10K1 PCI Audio Driver, version 0.7, 13:18:23 Mar 9 2001 PCI: Found IRQ 5 for device 00:0a.0 IRQ routing conflict in pirq table for device 00:07.2 IRQ routing conflict in pirq table for device 00:07.3 emu10k1: EMU10K1 rev 5 model 0x20 found, IO at 0xe000-0xe01f, IRQ 5 usb.c: registered new driver hub PCI: Found IRQ 5 for device 00:07.2 IRQ routing conflict in pirq table for device 00:07.2 IRQ routing conflict in pirq table for device 00:07.3 PCI: The same IRQ used for device 00:0a.0 uhci.c: USB UHCI at I/O 0xd400, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:07.3 IRQ routing conflict in pirq table for device 00:07.2 IRQ routing conflict in pirq table for device 00:07.3 PCI: The same IRQ used for device 00:0a.0 uhci.c: USB UHCI at I/O 0xd800, IRQ 10 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected linear personality registered raid0 personality registered raid1 personality registered raid5 personality registered raid5: measuring checksumming speed 8regs : 1222.000 MB/sec 32regs : 1081.600 MB/sec pII_mmx : 1873.200 MB/sec p5_mmx : 2396.800 MB/sec raid5: using function: p5_mmx (2396.800 MB/sec) md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md.c: sizeof(mdp_super_t) = 4096 autodetecting RAID arrays autorun ... ... autorun DONE. LVM version 0.9.1_beta2 by Heinz Mauelshagen (18/01/2001) lvm -- Driver successfully initialized NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 216k freed Adding Swap: 530136k swap-space (priority -1) reiserfs: checking transaction log (device 03:05) ... Using r5 hash to sort names ReiserFS version 3.6.25 snort uses obsolete (PF_INET,SOCK_PACKET) device eth0 entered promiscuous mode --------------------------------------- my syslog output from attempting a merge (and triggering a crash). This is the only thing that shows up anywhere, and it all looks perfectly normal compared to kernels which work. Except for the fact that it cuts off without unloading the module... Mar 9 13:30:48 hagbard kernel: hub.c: USB new device connect on bus1/2, assigned device number 3 Mar 9 13:30:48 hagbard kernel: usb.c: USB device 3 (vend/prod 0x82d/0x100) is not claimed by any active driver. Mar 9 13:30:48 hagbard kernel: usb.c: registered new driver serial Mar 9 13:30:48 hagbard kernel: usbserial.c: USB Serial support registered for Handspring Visor Mar 9 13:30:48 hagbard kernel: usbserial.c: Handspring Visor converter detected Mar 9 13:30:48 hagbard kernel: visor.c: Handspring Visor: Number of ports: 2 Mar 9 13:30:48 hagbard kernel: visor.c: Handspring Visor: port 1, is for Generic use and is bound to ttyUSB0 Mar 9 13:30:48 hagbard kernel: visor.c: Handspring Visor: port 2, is for HotSync use and is bound to ttyUSB1 Mar 9 13:30:48 hagbard kernel: usbserial.c: Handspring Visor converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Mar 9 13:30:48 hagbard kernel: usbserial.c: Handspring Visor converter now attached to ttyUSB1 (or usb/tts/1 for devfs) Mar 9 13:34:02 hagbard syslogd 1.3-3#33.1: restart. --------------------------------------- and finally, the .config that built the above kernel: # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_TOSHIBA is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # # General setup # CONFIG_NET=y # CONFIG_VISWS is not set CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # CONFIG_PNP=y # CONFIG_ISAPNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y CONFIG_BLK_DEV_LVM=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD7409 is not set # CONFIG_AMD7409_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_OSB4 is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI support # # CONFIG_SCSI is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_EEPRO100_PM is not set # CONFIG_LNE390 is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_WINBOND_840 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # # Joysticks # # CONFIG_JOYSTICK is not set # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_AGP_I810=y CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y CONFIG_AGP_SIS=y CONFIG_AGP_ALI=y CONFIG_DRM=y CONFIG_DRM_TDFX=y # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_I810 is not set # CONFIG_DRM_MGA is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_TMPFS is not set # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_MINIX_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_SYSV_FS_WRITE is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_SMB_NLS is not set # CONFIG_NLS is not set # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y CONFIG_FB_RIVA=y # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_HGA is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_SIS is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FBCON_ADVANCED is not set CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB32=y # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Sound # CONFIG_SOUND=y # CONFIG_SOUND_CMPCI is not set CONFIG_SOUND_EMU10K1=y # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set CONFIG_USB_UHCI_ALT=y # CONFIG_USB_OHCI is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_STORAGE is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HP5300 is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_DABUSB is not set # CONFIG_USB_PLUSB is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_DEBUG=y # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set CONFIG_USB_SERIAL_VISOR=m # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_RIO500 is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/