Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S275263AbTHASVB (ORCPT ); Fri, 1 Aug 2003 14:21:01 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S275264AbTHASVB (ORCPT ); Fri, 1 Aug 2003 14:21:01 -0400 Received: from pool-141-155-151-209.ny5030.east.verizon.net ([141.155.151.209]:30696 "EHLO mail.blazebox.homeip.net") by vger.kernel.org with ESMTP id S275263AbTHASU1 (ORCPT ); Fri, 1 Aug 2003 14:20:27 -0400 Date: Fri, 1 Aug 2003 14:22:07 -0400 From: Diffie To: linux-kernel@vger.kernel.org Subject: Badness in device_release at drivers/base/core.c:84 Message-ID: <20030801182207.GA3759@blazebox.homeip.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="PmA2V3Z32TCmWXqI" Content-Disposition: inline User-Agent: Mutt/1.4.1i X-Operating-System: Slackware Linux 9.0 X-Kernel-Version: Linux 2.6.0-test2-mm2 X-Mailer: Mutt 1.4.1i http://www.mutt.org X-AntiVirus: checked by AntiVir MailGate (version: 2.0.1.14; AVE: 6.20.0.1; VDF: 6.20.0.52; host: blazebox.homeip.net) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 69100 Lines: 1526 --PmA2V3Z32TCmWXqI Content-Type: multipart/mixed; boundary="ZGiS0Q5IWpPtfppv" Content-Disposition: inline --ZGiS0Q5IWpPtfppv Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello folks, Under 2.6.0-test2-mm2 keeps getting Badness in device_release at drivers/base/core.c:84 when loading USB modules on NFORCE2 based board. uname: Linux blaze 2.6.0-test2-mm2 #1 Thu Jul 31 13:11:05 EDT 2003 i686 unknown on Linux Slackware 9.0, GCC 3.2.2 Device '' does not have a release() function, it is broken and must be fixed. Badness in device_release at drivers/base/core.c:84 Call Trace: [] kobject_cleanup+0x88/0x90 [] hub_port_connect_change+0x2af/0x330 [] hub_port_status+0x3d/0xb0 [] hub_events+0x33d/0x3b0 [] hub_thread+0x35/0xf0 [] default_wake_function+0x0/0x30 [] hub_thread+0x0/0xf0 [] kernel_thread_helper+0x5/0xc =20 hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x501 Device '' does not have a release() function, it is broken and must be fixed. Badness in device_release at drivers/base/core.c:84 Call Trace: [] kobject_cleanup+0x88/0x90 [] hub_port_connect_change+0x2af/0x330 [] hub_port_status+0x3d/0xb0 [] hub_events+0x33d/0x3b0 [] hub_thread+0x35/0xf0 [] default_wake_function+0x0/0x30 [] hub_thread+0x0/0xf0 [] kernel_thread_helper+0x5/0xc =20 hub 1-0:0: debounce: port 3: delay 100ms stable 4 status 0x501 Device '' does not have a release() function, it is broken and must be fixed. Badness in device_release at drivers/base/core.c:84 Call Trace: [] kobject_cleanup+0x88/0x90 [] hub_port_connect_change+0x2af/0x330 [] hub_port_status+0x3d/0xb0 [] hub_events+0x33d/0x3b0 [] hub_thread+0x35/0xf0 [] default_wake_function+0x0/0x30 [] hub_thread+0x0/0xf0 [] kernel_thread_helper+0x5/0xc Also keep getting oops in radeon module: [drm] Loading R200 Microcode Unable to handle kernel NULL pointer dereference at virtual address 00000120 printing eip: c02a8cae *pde =3D 00000000 Oops: 0000 [#1] PREEMPT CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00210286 EIP is at aic7xxx_proc_info+0x2e/0xc80 eax: c1bb25b0 ebx: c1bb2400 ecx: c038bb20 edx: 00000000 esi: 00000400 edi: f1715000 ebp: 412de000 esp: f620fecc ds: 007b es: 007b ss: 0068 Process nautilus (pid: 3555, threadinfo=3Df620e000 task=3Df6216720) Stack: 000001f7 00000000 00000000 c013c612 c0379eb0 00000000 00000000 f6613= 340 00000000 00000000 c0379eb0 00000400 00000400 f1715000 412de000 c0295= 6fc c1bb2400 f1715000 f620ff60 00000000 00000400 00000000 c02956c0 c018b= c91 Call Trace: [] __alloc_pages+0x92/0x320 [] proc_scsi_read+0x3c/0x60 [] proc_scsi_read+0x0/0x60 [] proc_file_read+0xd1/0x280 [] vfs_read+0xbc/0x130 [] sys_read+0x42/0x70 [] syscall_call+0x7/0xb Code: 53 83 ec 2c a1 b8 a6 38 c0 89 44 24 20 8b 98 20 01 00 00 85 db 74 1e 8d b6 00 00 00 00 8b 54 24 20 8b 92 1c 01 00 00 89 54 24 20 <8b> 8a 20 01 00 00 85 c9 75 e8 8b 54 24 20 85 d2 0f 84 e4 0b 00 There also seems to be a problem with SCSI subsystem where /dev/sda devices are labeled as /dev/sdb as seen in the dmesg.txt attached file. Regards, Paul B. --ZGiS0Q5IWpPtfppv Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg-full.txt" Content-Transfer-Encoding: quoted-printable Linux version 2.6.0-test2-mm2 (diffie@blaze) (gcc version 3.2.2) #1 Thu Jul= 31 13:11:05 EDT 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f52c0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 ACPI: RSDP (v000 Nvidia ) @ 0x000f6c30 ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff7680 ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x= 0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x= 3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=3D2.6.0 ro root=3D803 rootflags=3Dquota roo= t=3D/dev/sdb3 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2205.019 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4358.14 BogoMIPS Memory: 1033784k/1048512k available (2223k kernel code, 13788k reserved, 59= 4k data, 332k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 3200+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 n= ot connected. =2E.TIMER: vector=3D0x31 pin1=3D2 pin2=3D-1 =2E.MP-BIOS bug: 8254 timer not connected to IO-APIC =2E..trying to set up timer (IRQ0) through the 8259A ... failed. =2E..trying to set up timer as Virtual Wire IRQ... failed. =2E..trying to set up timer as ExtINT IRQ... works. number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... =2E... register #00: 02000000 =2E...... : physical APIC id: 02 =2E...... : Delivery Type: 0 =2E...... : LTS : 0 =2E... register #01: 00170011 =2E...... : max redirection entries: 0017 =2E...... : PRQ implemented: 0 =2E...... : IO APIC version: 0011 =2E... register #02: 00000000 =2E...... : arbitration: 00 =2E... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =20 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 1 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 =2E................................... done. Using local APIC timer interrupts. calibrating APIC timer ... =2E.... CPU clock speed is 2204.0719 MHz. =2E.... host bus clock speed is 400.0858 MHz. mtrr: v2.0 (20020519) Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=3D3 PCI: Using configuration type 1 BIO: pool of 256 setup, 15Kb (60 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030714 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [APC1] (IRQs *16) ACPI: PCI Interrupt Link [APC2] (IRQs 17, disabled) ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled) ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCS] (IRQs *23) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled) Linux Plug and Play Support v0.96 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:0) 00:00:01[A] -> 2-23 -> IRQ 23 Pin 2-23 already programmed ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1 Active:0) 00:00:02[A] -> 2-20 -> IRQ 20 ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:0) 00:00:02[B] -> 2-22 -> IRQ 22 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:0) 00:00:02[C] -> 2-21 -> IRQ 21 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:0) 00:01:06[A] -> 2-18 -> IRQ 18 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:0) 00:01:06[B] -> 2-19 -> IRQ 19 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd9 -> IRQ 16 Mode:1 Active:0) 00:01:06[C] -> 2-16 -> IRQ 16 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xe1 -> IRQ 17 Mode:1 Active:0) 00:01:06[D] -> 2-17 -> IRQ 17 Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-19 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=3Dnoacpi' or even 'a= cpi=3Doff' pty: 512 Unix98 ptys configured Enabling SEP on CPU 0 Total HugeTLB memory allocated, 0 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS for Linux 2.6.0-test2-mm2 with ACLs, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A Using anticipatory scheduling elevator Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later AMD_IDE: Bios didn't set cable bits correctly. Enabling workaround. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 control= ler on pci0000:00:09.0 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DJNA-372200, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area =3D> 1 hda: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=3D43800/16/63 /dev/ide/host0/bus0/target0/lun0: p1 (scsi0) found at PCI 1/10/0 (scsi0) Wide Channel, SCSI ID=3D7, 32/255 SCBs (scsi0) Downloading sequencer code... 398 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.6/5.2.0 Vendor: Model: Rev: =20 Type: Direct-Access ANSI SCSI revision: 00 Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DDYS-T36950N Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 sda: Spinning up disk......<5>Attached scsi disk sda at scsi0, channel 0, i= d 3, lun 0 (scsi0:0:6:0) Synchronous at 80.0 Mbyte/sec, offset 63. SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sdb: drive cache: write back /dev/scsi/host0/bus0/target6/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 > Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 4, lun 0, type 5 Attached scsi generic sg2 at scsi0, channel 0, id 6, lun 0, type 0 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BIOS EDD facility v0.09 2003-Jan-22, 2 devices found XFS mounting filesystem sdb3 Starting XFS recovery on filesystem: sdb3 (dev: 8/19) Ending XFS recovery on filesystem: sdb3 (dev: 8/19) VFS: Mounted root (xfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 332k freed XFS mounting filesystem hda1 Ending clean XFS mount for filesystem: hda1 --ZGiS0Q5IWpPtfppv Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Content-Transfer-Encoding: quoted-printable *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [APC1] (IRQs *16) ACPI: PCI Interrupt Link [APC2] (IRQs 17, disabled) ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled) ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCS] (IRQs *23) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled) Linux Plug and Play Support v0.96 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:0) 00:00:01[A] -> 2-23 -> IRQ 23 Pin 2-23 already programmed ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1 Active:0) 00:00:02[A] -> 2-20 -> IRQ 20 ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:0) 00:00:02[B] -> 2-22 -> IRQ 22 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:0) 00:00:02[C] -> 2-21 -> IRQ 21 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:0) 00:01:06[A] -> 2-18 -> IRQ 18 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:0) 00:01:06[B] -> 2-19 -> IRQ 19 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd9 -> IRQ 16 Mode:1 Active:0) 00:01:06[C] -> 2-16 -> IRQ 16 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xe1 -> IRQ 17 Mode:1 Active:0) 00:01:06[D] -> 2-17 -> IRQ 17 Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-19 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=3Dnoacpi' or even 'a= cpi=3Doff' pty: 512 Unix98 ptys configured Enabling SEP on CPU 0 Total HugeTLB memory allocated, 0 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS for Linux 2.6.0-test2-mm2 with ACLs, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A Using anticipatory scheduling elevator Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later AMD_IDE: Bios didn't set cable bits correctly. Enabling workaround. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 control= ler on pci0000:00:09.0 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DJNA-372200, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area =3D> 1 hda: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=3D43800/16/63 /dev/ide/host0/bus0/target0/lun0: p1 (scsi0) found at PCI 1/10/0 (scsi0) Wide Channel, SCSI ID=3D7, 32/255 SCBs (scsi0) Downloading sequencer code... 398 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.6/5.2.0 Vendor: Model: Rev: =20 Type: Direct-Access ANSI SCSI revision: 00 Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DDYS-T36950N Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 sda: Spinning up disk......<5>Attached scsi disk sda at scsi0, channel 0, i= d 3, lun 0 (scsi0:0:6:0) Synchronous at 80.0 Mbyte/sec, offset 63. SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sdb: drive cache: write back /dev/scsi/host0/bus0/target6/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 > Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 4, lun 0, type 5 Attached scsi generic sg2 at scsi0, channel 0, id 6, lun 0, type 0 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BIOS EDD facility v0.09 2003-Jan-22, 2 devices found XFS mounting filesystem sdb3 Ending clean XFS mount for filesystem: sdb3 VFS: Mounted root (xfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 332k freed Adding 248968k swap on /dev/sdb10. Priority:-1 extents:1 (scsi0:0:4:0) Synchronous at 20.0 Mbyte/sec, offset 16. sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 XFS mounting filesystem sdb1 Ending clean XFS mount for filesystem: sdb1 NTFS driver 2.1.4 [Flags: R/O MODULE]. NTFS volume version 3.0. XFS mounting filesystem sdb5 Ending clean XFS mount for filesystem: sdb5 XFS mounting filesystem sdb6 Ending clean XFS mount for filesystem: sdb6 XFS mounting filesystem sdb7 Ending clean XFS mount for filesystem: sdb7 XFS mounting filesystem sdb8 Ending clean XFS mount for filesystem: sdb8 XFS mounting filesystem sdb9 Ending clean XFS mount for filesystem: sdb9 XFS mounting filesystem hda1 Ending clean XFS mount for filesystem: hda1 Real Time Clock Driver v1.11 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice Intel(R) PRO/1000 Network Driver - version 5.1.13-k2 Copyright (c) 1999-2003 Intel Corporation. eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 100 Mbps Full Duplex ohci1394: $Rev: 1011 $ Ben Collins PCI: Setting latency timer of device 0000:00:0d.0 to 64 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=3D[22] MMIO=3D[ce084000-ce0847ff] Ma= x Packet=3D[2048] ohci1394_0: SelfID received outside of bus reset sequence Intel 810 + AC97 Audio, version 0.24, 13:15:12 Jul 31 2003 PCI: Setting latency timer of device 0000:00:06.0 to 64 i810: NVIDIA nForce Audio found at IO 0xd000 and 0xe400, MEM 0x0000 and 0x0= 000, IRQ 21 ieee1394: Host added: ID:BUS[0-00:1023] GUID[8a1cc7ffff0020ed] i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ALG32 (ALC650) i810_audio: AC'97 codec 0, new EID value =3D 0x05c7 i810_audio: AC'97 codec 0, DAC map configured, total channels =3D 6 i810_audio: setting clocking to 48648 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: PCI device 10de:0068 (nVidia Corporation) ehci_hcd 0000:00:02.2: irq 21, pci mem f88c4000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:0: USB hub found hub 1-0:0: 6 ports detected ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci-hcd 0000:00:02.0: PCI device 10de:0067 (nVidia Corporation) ohci-hcd 0000:00:02.0: irq 20, pci mem f8970000 ohci-hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 3 ports detected PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci-hcd 0000:00:02.1: PCI device 10de:0067 (nVidia Corporation) ohci-hcd 0000:00:02.1: irq 22, pci mem f8972000 ohci-hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 hub 3-0:0: USB hub found hub 3-0:0: 3 ports detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected NVIDIA nForce2 chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 512M @ 0xa0000000 hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501 Device '' does not have a release() function, it is broken and must be fixe= d. Badness in device_release at drivers/base/core.c:84 Call Trace: [] kobject_cleanup+0x88/0x90 [] hub_port_connect_change+0x2af/0x330 [] hub_port_status+0x3d/0xb0 [] hub_events+0x33d/0x3b0 [] hub_thread+0x35/0xf0 [] default_wake_function+0x0/0x30 [] hub_thread+0x0/0xf0 [] kernel_thread_helper+0x5/0xc hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x501 Device '' does not have a release() function, it is broken and must be fixe= d. Badness in device_release at drivers/base/core.c:84 Call Trace: [] kobject_cleanup+0x88/0x90 [] hub_port_connect_change+0x2af/0x330 [] hub_port_status+0x3d/0xb0 [] hub_events+0x33d/0x3b0 [] hub_thread+0x35/0xf0 [] default_wake_function+0x0/0x30 [] hub_thread+0x0/0xf0 [] kernel_thread_helper+0x5/0xc hub 1-0:0: debounce: port 3: delay 100ms stable 4 status 0x501 Device '' does not have a release() function, it is broken and must be fixe= d. Badness in device_release at drivers/base/core.c:84 Call Trace: [] kobject_cleanup+0x88/0x90 [] hub_port_connect_change+0x2af/0x330 [] hub_port_status+0x3d/0xb0 [] hub_events+0x33d/0x3b0 [] hub_thread+0x35/0xf0 [] default_wake_function+0x0/0x30 [] hub_thread+0x0/0xf0 [] kernel_thread_helper+0x5/0xc hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 2-0:0: new USB device on port 1, assigned address 2 hub 2-1:0: USB hub found hub 2-1:0: 3 ports detected hub 2-0:0: debounce: port 2: delay 100ms stable 4 status 0x301 hub 2-0:0: new USB device on port 2, assigned address 3 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with Intelli= Eye(TM)] on usb-0000:00:02.0-2 hub 2-1:0: debounce: port 1: delay 100ms stable 4 status 0x301 hub 2-1:0: new USB device on port 1, assigned address 4 input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:= 00:02.0-1.1 input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00= :02.0-1.1 hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 3-0:0: new USB device on port 1, assigned address 2 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. [drm] Initialized radeon 1.9.0 20020828 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:03:00.0 into 1x mode [drm] Loading R200 Microcode Unable to handle kernel NULL pointer dereference at virtual address 00000120 printing eip: c02a8cae *pde =3D 00000000 Oops: 0000 [#1] PREEMPT=20 CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00210286 EIP is at aic7xxx_proc_info+0x2e/0xc80 eax: c1bb25b0 ebx: c1bb2400 ecx: c038bb20 edx: 00000000 esi: 00000400 edi: f1715000 ebp: 412de000 esp: f620fecc ds: 007b es: 007b ss: 0068 Process nautilus (pid: 3555, threadinfo=3Df620e000 task=3Df6216720) Stack: 000001f7 00000000 00000000 c013c612 c0379eb0 00000000 00000000 f6613= 340=20 00000000 00000000 c0379eb0 00000400 00000400 f1715000 412de000 c0295= 6fc=20 c1bb2400 f1715000 f620ff60 00000000 00000400 00000000 c02956c0 c018b= c91=20 Call Trace: [] __alloc_pages+0x92/0x320 [] proc_scsi_read+0x3c/0x60 [] proc_scsi_read+0x0/0x60 [] proc_file_read+0xd1/0x280 [] vfs_read+0xbc/0x130 [] sys_read+0x42/0x70 [] syscall_call+0x7/0xb Code: 53 83 ec 2c a1 b8 a6 38 c0 89 44 24 20 8b 98 20 01 00 00 85 db 74 1e = 8d b6 00 00 00 00 8b 54 24 20 8b 92 1c 01 00 00 89 54 24 20 <8b> 8a 20 01 0= 0 00 85 c9 75 e8 8b 54 24 20 85 d2 0f 84 e4 0b 00=20 =20 --ZGiS0Q5IWpPtfppv Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="oops.txt" Content-Transfer-Encoding: quoted-printable ksymoops 2.4.8 on i686 2.6.0-test2-mm2. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.6.0-test2-mm2/ (default) -m /usr/src/linux/System.map (default) Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options. Error (regular_file): read_ksyms stat /proc/ksyms failed No modules in ksyms, skipping objects No ksyms, skipping lsmod Jul 31 11:11:24 blaze kernel: cpu: 0, clocks: 4009054, slice: 2004527 Jul 31 12:06:57 blaze kernel: cpu: 0, clocks: 4009123, slice: 2004561 Jul 31 12:32:01 blaze kernel: cpu: 0, clocks: 4009252, slice: 2004626 Jul 31 14:00:47 blaze kernel: Call Trace: Jul 31 14:00:47 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:00:47 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:00:47 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:00:47 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:00:47 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:00:47 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:00:47 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:00:47 blaze kernel: [] kernel_thread_helper+0x5/0xc Jul 31 14:00:47 blaze kernel: Call Trace: Jul 31 14:00:47 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:00:47 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:00:47 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:00:47 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:00:47 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:00:47 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:00:47 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:00:47 blaze kernel: [] kernel_thread_helper+0x5/0xc Warning (Oops_read): Code line not seen, dumping what data is available Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Jul 31 14:18:03 blaze kernel: Call Trace: Jul 31 14:18:03 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:18:03 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:18:03 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:18:03 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:18:03 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:18:03 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:18:03 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:18:03 blaze kernel: [] kernel_thread_helper+0x5/0xc Jul 31 14:18:03 blaze kernel: Call Trace: Jul 31 14:18:03 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:18:03 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:18:03 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:18:03 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:18:03 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:18:03 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:18:03 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:18:03 blaze kernel: [] kernel_thread_helper+0x5/0xc Jul 31 14:18:20 blaze kernel: Call Trace: Jul 31 14:18:20 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:18:20 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:18:20 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:18:20 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:18:20 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:18:20 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:18:20 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:18:20 blaze kernel: [] kernel_thread_helper+0x5/0xc Jul 31 14:20:55 blaze kernel: Call Trace: Jul 31 14:20:55 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:20:55 blaze kernel: [] device_unregister+0x13/0x30 Jul 31 14:20:55 blaze kernel: [] usb_disconnect+0xa9/0x100 Jul 31 14:20:55 blaze kernel: [] hub_port_connect_change+0x325/0= x330 Jul 31 14:20:55 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:20:55 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:20:55 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:20:55 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:20:55 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:20:55 blaze kernel: [] kernel_thread_helper+0x5/0xc Warning (Oops_read): Code line not seen, dumping what data is available Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c0264d03 Trace; c02bd9a9 Trace; c02c0475 Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Jul 31 14:23:49 blaze kernel: Call Trace: Jul 31 14:23:49 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:23:49 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:23:49 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:23:49 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:23:49 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:23:49 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:23:49 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:23:49 blaze kernel: [] kernel_thread_helper+0x5/0xc Jul 31 14:23:49 blaze kernel: Call Trace: Jul 31 14:23:49 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:23:49 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:23:49 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:23:49 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:23:49 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:23:49 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:23:49 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:23:49 blaze kernel: [] kernel_thread_helper+0x5/0xc Warning (Oops_read): Code line not seen, dumping what data is available Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Jul 31 14:46:37 blaze kernel: Unable to handle kernel paging request at vir= tual address f885d6c8 Jul 31 14:46:37 blaze kernel: f8b27e5b Jul 31 14:46:37 blaze kernel: *pde =3D 37f84067 Jul 31 14:46:37 blaze kernel: Oops: 0000 [#1] Jul 31 14:46:37 blaze kernel: CPU: 0 Jul 31 14:46:37 blaze kernel: EIP: 0060:[] Tainted: PF VLI Using defaults from ksymoops -t elf32-i386 -a i386 Jul 31 14:46:37 blaze kernel: EFLAGS: 00213212 Jul 31 14:46:37 blaze kernel: eax: 00000000 ebx: 00000000 ecx: 00000000= edx: c0377538 Jul 31 14:46:37 blaze kernel: esi: 00000001 edi: 00000380 ebp: 00000000= esp: f60bbea8 Jul 31 14:46:37 blaze kernel: ds: 007b es: 007b ss: 0068 Jul 31 14:46:37 blaze kernel: Stack: c041c356 00203246 00000000 f8b4f570 f8= b4f0c8 00000000 f8b27ee8 f60bbef4=20 Jul 31 14:46:37 blaze kernel: f8b4f51c cb000000 f66b5980 f8b4f570 f8= b4f570 f74f4140 f8b4f3b0 f8b280f0=20 Jul 31 14:46:37 blaze kernel: f8b3db20 00000000 00000063 f8b2b296 00= 000000 00000001 f6fcb540 f8b2b35d=20 Jul 31 14:46:37 blaze kernel: Call Trace: Jul 31 14:46:37 blaze kernel: [] agp_backend_initialize+0x28/0x1= b0 [fglrx] Jul 31 14:46:37 blaze kernel: [] __fgl_agp_init+0x30/0x50 [fglrx] Jul 31 14:46:37 blaze kernel: [] __ke_firegl_agpgart_available+0= x16/0x80 [fglrx] Jul 31 14:46:37 blaze kernel: [] __ke_agp_available+0x2d/0x30 [f= glrx] Jul 31 14:46:37 blaze kernel: [] drm_agp_init+0x42/0x90 [fglrx] Jul 31 14:46:37 blaze kernel: [] _firegl_agp_acquire+0x74/0x330 = [fglrx] Jul 31 14:46:37 blaze kernel: [] firegl_agp_acquire+0x61/0x90 [f= glrx] Jul 31 14:46:37 blaze kernel: [] firegl_agp_acquire+0x0/0x90 [fg= lrx] Jul 31 14:46:37 blaze kernel: [] firegl_ioctl+0x146/0x1b0 [fglrx] Jul 31 14:46:37 blaze kernel: [] sys_ioctl+0xf3/0x280 Jul 31 14:46:37 blaze kernel: [] syscall_call+0x7/0xb Jul 31 14:46:37 blaze kernel: Code: c7 89 c6 eb c5 8d 74 26 00 8d bc 27 00 = 00 00 00 55 57 56 be 01 00 00 00 53 83 ec 08 8b 3d 28 79 42 c0 81 c7 00 00 = 00 40 c1 ef 14 <3b> 3d c8 d6 85 f8 7e 10 b8 c0 d6 85 f8 46 3b 3c f0 7e 05 8= 3 fe=20 >>EIP; f8b27e5b <_end+386c87eb/3fb9e990> <=3D=3D=3D=3D=3D >>edx; c0377538 <__func__.0+2e7ef/36427> >>esp; f60bbea8 <_end+35c5c838/3fb9e990> Trace; f8b27ee8 <_end+386c8878/3fb9e990> Trace; f8b280f0 <_end+386c8a80/3fb9e990> Trace; f8b2b296 <_end+386cbc26/3fb9e990> Trace; f8b2b35d <_end+386cbced/3fb9e990> Trace; f8b3b6e2 <_end+386dc072/3fb9e990> Trace; f8b3a8a4 <_end+386db234/3fb9e990> Trace; f8b3abe1 <_end+386db571/3fb9e990> Trace; f8b3ab80 <_end+386db510/3fb9e990> Trace; f8b2bef6 <_end+386cc886/3fb9e990> Trace; c0169a33 <__posix_lock_file+173/5f0> Trace; c01091f7 Code; f8b27e30 <_end+386c87c0/3fb9e990> 00000000 <_EIP>: Code; f8b27e30 <_end+386c87c0/3fb9e990> 0: c7 89 c6 eb c5 8d 74 movl $0x8d002674,0x8dc5ebc6(%ecx) Code; f8b27e37 <_end+386c87c7/3fb9e990> 7: 26 00 8d=20 Code; f8b27e3a <_end+386c87ca/3fb9e990> a: bc 27 00 00 00 mov $0x27,%esp Code; f8b27e3f <_end+386c87cf/3fb9e990> f: 00 55 57 add %dl,0x57(%ebp) Code; f8b27e42 <_end+386c87d2/3fb9e990> 12: 56 push %esi Code; f8b27e43 <_end+386c87d3/3fb9e990> 13: be 01 00 00 00 mov $0x1,%esi Code; f8b27e48 <_end+386c87d8/3fb9e990> 18: 53 push %ebx Code; f8b27e49 <_end+386c87d9/3fb9e990> 19: 83 ec 08 sub $0x8,%esp Code; f8b27e4c <_end+386c87dc/3fb9e990> 1c: 8b 3d 28 79 42 c0 mov 0xc0427928,%edi Code; f8b27e52 <_end+386c87e2/3fb9e990> 22: 81 c7 00 00 00 40 add $0x40000000,%edi Code; f8b27e58 <_end+386c87e8/3fb9e990> 28: c1 ef 14 shr $0x14,%edi Code; f8b27e5b <_end+386c87eb/3fb9e990> <=3D=3D=3D=3D=3D 2b: 3b 3d c8 d6 85 f8 cmp 0xf885d6c8,%edi <=3D=3D=3D=3D=3D Code; f8b27e61 <_end+386c87f1/3fb9e990> 31: 7e 10 jle 43 <_EIP+0x43> Code; f8b27e63 <_end+386c87f3/3fb9e990> 33: b8 c0 d6 85 f8 mov $0xf885d6c0,%eax Code; f8b27e68 <_end+386c87f8/3fb9e990> 38: 46 inc %esi Code; f8b27e69 <_end+386c87f9/3fb9e990> 39: 3b 3c f0 cmp (%eax,%esi,8),%edi Code; f8b27e6c <_end+386c87fc/3fb9e990> 3c: 7e 05 jle 43 <_EIP+0x43> Code; f8b27e6e <_end+386c87fe/3fb9e990> 3e: 83 .byte 0x83 Code; f8b27e6f <_end+386c87ff/3fb9e990> 3f: fe .byte 0xfe Jul 31 14:49:12 blaze kernel: Call Trace: Jul 31 14:49:12 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:49:12 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:49:12 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:49:12 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:49:12 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:49:12 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:49:12 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:49:12 blaze kernel: [] kernel_thread_helper+0x5/0xc Jul 31 14:49:12 blaze kernel: Call Trace: Jul 31 14:49:12 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:49:12 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:49:12 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:49:12 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:49:12 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:49:12 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:49:12 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:49:12 blaze kernel: [] kernel_thread_helper+0x5/0xc Jul 31 14:49:31 blaze kernel: Call Trace: Jul 31 14:49:31 blaze kernel: [] kobject_cleanup+0x88/0x90 Jul 31 14:49:31 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Jul 31 14:49:31 blaze kernel: [] hub_port_status+0x3d/0xb0 Jul 31 14:49:31 blaze kernel: [] hub_events+0x33d/0x3b0 Jul 31 14:49:31 blaze kernel: [] hub_thread+0x35/0xf0 Jul 31 14:49:31 blaze kernel: [] default_wake_function+0x0/0x30 Jul 31 14:49:31 blaze kernel: [] hub_thread+0x0/0xf0 Jul 31 14:49:31 blaze kernel: [] kernel_thread_helper+0x5/0xc Warning (Oops_read): Code line not seen, dumping what data is available Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Aug 1 02:49:43 blaze kernel: Call Trace: Aug 1 02:49:43 blaze kernel: [] kobject_cleanup+0x88/0x90 Aug 1 02:49:43 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Aug 1 02:49:43 blaze kernel: [] hub_port_status+0x3d/0xb0 Aug 1 02:49:43 blaze kernel: [] hub_events+0x33d/0x3b0 Aug 1 02:49:43 blaze kernel: [] hub_thread+0x35/0xf0 Aug 1 02:49:43 blaze kernel: [] default_wake_function+0x0/0x30 Aug 1 02:49:43 blaze kernel: [] hub_thread+0x0/0xf0 Aug 1 02:49:43 blaze kernel: [] kernel_thread_helper+0x5/0xc Aug 1 02:49:43 blaze kernel: Call Trace: Aug 1 02:49:43 blaze kernel: [] kobject_cleanup+0x88/0x90 Aug 1 02:49:43 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Aug 1 02:49:43 blaze kernel: [] hub_port_status+0x3d/0xb0 Aug 1 02:49:43 blaze kernel: [] hub_events+0x33d/0x3b0 Aug 1 02:49:43 blaze kernel: [] hub_thread+0x35/0xf0 Aug 1 02:49:43 blaze kernel: [] default_wake_function+0x0/0x30 Aug 1 02:49:43 blaze kernel: [] hub_thread+0x0/0xf0 Aug 1 02:49:43 blaze kernel: [] kernel_thread_helper+0x5/0xc Aug 1 02:49:43 blaze kernel: Call Trace: Aug 1 02:49:43 blaze kernel: [] kobject_cleanup+0x88/0x90 Aug 1 02:49:43 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Aug 1 02:49:43 blaze kernel: [] hub_port_status+0x3d/0xb0 Aug 1 02:49:43 blaze kernel: [] hub_events+0x33d/0x3b0 Aug 1 02:49:43 blaze kernel: [] hub_thread+0x35/0xf0 Aug 1 02:49:43 blaze kernel: [] default_wake_function+0x0/0x30 Aug 1 02:49:43 blaze kernel: [] hub_thread+0x0/0xf0 Aug 1 02:49:43 blaze kernel: [] kernel_thread_helper+0x5/0xc Warning (Oops_read): Code line not seen, dumping what data is available Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Aug 1 02:53:16 blaze kernel: Call Trace: Aug 1 02:53:16 blaze kernel: [] kobject_cleanup+0x88/0x90 Aug 1 02:53:16 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Aug 1 02:53:16 blaze kernel: [] hub_port_status+0x3d/0xb0 Aug 1 02:53:16 blaze kernel: [] hub_events+0x33d/0x3b0 Aug 1 02:53:16 blaze kernel: [] hub_thread+0x35/0xf0 Aug 1 02:53:16 blaze kernel: [] default_wake_function+0x0/0x30 Aug 1 02:53:16 blaze kernel: [] hub_thread+0x0/0xf0 Aug 1 02:53:16 blaze kernel: [] kernel_thread_helper+0x5/0xc Aug 1 02:53:16 blaze kernel: Call Trace: Aug 1 02:53:16 blaze kernel: [] kobject_cleanup+0x88/0x90 Aug 1 02:53:16 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Aug 1 02:53:16 blaze kernel: [] hub_port_status+0x3d/0xb0 Aug 1 02:53:16 blaze kernel: [] hub_events+0x33d/0x3b0 Aug 1 02:53:16 blaze kernel: [] hub_thread+0x35/0xf0 Aug 1 02:53:16 blaze kernel: [] default_wake_function+0x0/0x30 Aug 1 02:53:16 blaze kernel: [] hub_thread+0x0/0xf0 Aug 1 02:53:16 blaze kernel: [] kernel_thread_helper+0x5/0xc Aug 1 02:53:16 blaze kernel: Call Trace: Aug 1 02:53:16 blaze kernel: [] kobject_cleanup+0x88/0x90 Aug 1 02:53:16 blaze kernel: [] hub_port_connect_change+0x2af/0= x330 Aug 1 02:53:16 blaze kernel: [] hub_port_status+0x3d/0xb0 Aug 1 02:53:16 blaze kernel: [] hub_events+0x33d/0x3b0 Aug 1 02:53:16 blaze kernel: [] hub_thread+0x35/0xf0 Aug 1 02:53:16 blaze kernel: [] default_wake_function+0x0/0x30 Aug 1 02:53:16 blaze kernel: [] hub_thread+0x0/0xf0 Aug 1 02:53:16 blaze kernel: [] kernel_thread_helper+0x5/0xc Aug 1 04:13:20 blaze kernel: Unable to handle kernel NULL pointer derefere= nce at virtual address 00000120 Aug 1 04:13:20 blaze kernel: c02a8cae Aug 1 04:13:20 blaze kernel: *pde =3D 00000000 Aug 1 04:13:20 blaze kernel: Oops: 0000 [#1] Aug 1 04:13:20 blaze kernel: CPU: 0 Aug 1 04:13:20 blaze kernel: EIP: 0060:[] Not tainted VLI Aug 1 04:13:20 blaze kernel: EFLAGS: 00210286 Aug 1 04:13:20 blaze kernel: eax: c1bb25b0 ebx: c1bb2400 ecx: c038bb20= edx: 00000000 Aug 1 04:13:20 blaze kernel: esi: 00000400 edi: f3a10000 ebp: 412de000= esp: f6219ecc Aug 1 04:13:20 blaze kernel: ds: 007b es: 007b ss: 0068 Aug 1 04:13:20 blaze kernel: Stack: 000001f7 00000000 00000000 c013c612 c0= 379eb0 00000000 00000000 f65e5340=20 Aug 1 04:13:20 blaze kernel: 00000000 00000000 c0379eb0 00000400 00= 000400 f3a10000 412de000 c02956fc=20 Aug 1 04:13:20 blaze kernel: c1bb2400 f3a10000 f6219f60 00000000 00= 000400 00000000 c02956c0 c018bc91=20 Aug 1 04:13:20 blaze kernel: Call Trace: Aug 1 04:13:20 blaze kernel: [] __alloc_pages+0x92/0x320 Aug 1 04:13:20 blaze kernel: [] proc_scsi_read+0x3c/0x60 Aug 1 04:13:20 blaze kernel: [] proc_scsi_read+0x0/0x60 Aug 1 04:13:20 blaze kernel: [] proc_file_read+0xd1/0x280 Aug 1 04:13:20 blaze kernel: [] vfs_read+0xbc/0x130 Aug 1 04:13:20 blaze kernel: [] sys_read+0x42/0x70 Aug 1 04:13:20 blaze kernel: [] syscall_call+0x7/0xb Aug 1 04:13:20 blaze kernel: Code: 53 83 ec 2c a1 b8 a6 38 c0 89 44 24 20 = 8b 98 20 01 00 00 85 db 74 1e 8d b6 00 00 00 00 8b 54 24 20 8b 92 1c 01 00 = 00 89 54 24 20 <8b> 8a 20 01 00 00 85 c9 75 e8 8b 54 24 20 85 d2 0f 84 e4 0= b 00=20 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 Trace; c021dfd8 Trace; c02c03ff Trace; c02bfcfd Trace; c02c07bd Trace; c02c0865 Trace; c011b810 Trace; c02c0830 Trace; c01070c9 >>EIP; c02a8cae <=3D=3D=3D=3D=3D >>eax; c1bb25b0 <_end+1752f40/3fb9e990> >>ebx; c1bb2400 <_end+1752d90/3fb9e990> >>ecx; c038bb20 >>edi; f3a10000 <_end+335b0990/3fb9e990> >>esp; f6219ecc <_end+35dba85c/3fb9e990> Trace; c013c612 Trace; c02956fc Trace; c02956c0 Trace; c018bc91 Trace; c015617c <__set_page_dirty_buffers+ec/170> Trace; c0156452 Trace; c01091f7 Code; c02a8c83 00000000 <_EIP>: Code; c02a8c83 0: 53 push %ebx Code; c02a8c84 1: 83 ec 2c sub $0x2c,%esp Code; c02a8c87 4: a1 b8 a6 38 c0 mov 0xc038a6b8,%eax Code; c02a8c8c 9: 89 44 24 20 mov %eax,0x20(%esp,1) Code; c02a8c90 d: 8b 98 20 01 00 00 mov 0x120(%eax),%ebx Code; c02a8c96 13: 85 db test %ebx,%ebx Code; c02a8c98 15: 74 1e je 35 <_EIP+0x35> Code; c02a8c9a 17: 8d b6 00 00 00 00 lea 0x0(%esi),%esi Code; c02a8ca0 1d: 8b 54 24 20 mov 0x20(%esp,1),%edx Code; c02a8ca4 21: 8b 92 1c 01 00 00 mov 0x11c(%edx),%edx Code; c02a8caa 27: 89 54 24 20 mov %edx,0x20(%esp,1) Code; c02a8cae <=3D=3D=3D=3D=3D 2b: 8b 8a 20 01 00 00 mov 0x120(%edx),%ecx <=3D=3D=3D=3D=3D Code; c02a8cb4 31: 85 c9 test %ecx,%ecx Code; c02a8cb6 33: 75 e8 jne 1d <_EIP+0x1d> Code; c02a8cb8 35: 8b 54 24 20 mov 0x20(%esp,1),%edx Code; c02a8cbc 39: 85 d2 test %edx,%edx Code; c02a8cbe 3b: 0f .byte 0xf Code; c02a8cbf 3c: 84 e4 test %ah,%ah Code; c02a8cc1 3e: 0b 00 or (%eax),%eax Aug 1 13:13:31 blaze kernel: Call Trace: Aug 1 13:13:31 blaze kernel: [] kobject_cleanup+0x88/0x90 Aug 1 13:13:31 blaze kernel: [