Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S270453AbTHCAZi (ORCPT ); Sat, 2 Aug 2003 20:25:38 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S270455AbTHCAZi (ORCPT ); Sat, 2 Aug 2003 20:25:38 -0400 Received: from baloney.puettmann.net ([194.97.54.34]:53713 "EHLO baloney.puettmann.net") by vger.kernel.org with ESMTP id S270453AbTHCAZ2 (ORCPT ); Sat, 2 Aug 2003 20:25:28 -0400 Date: Sun, 3 Aug 2003 02:24:38 +0200 To: linux-kernel@vger.kernel.org Subject: ACPI Error with 2.4.20-pre10 on ibm thinkpad Message-ID: <20030803002438.GA15097@puettmann.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.4i From: Ruben Puettmann X-Scanner: exiscan *19j6fu-0003vk-00*jfKUD5LNxFA* (Puettmann.NeT, Germany) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13179 Lines: 326 hy, I try to use acpi on my new IBM thinkpad r40 but it won't work: Kernel: 2.4.22-pre10 Config: CONFIG_APM=m CONFIG_APM_IGNORE_USER_SUSPEND=y # CONFIG_APM_DO_ENABLE is not set CONFIG_APM_CPU_IDLE=y CONFIG_APM_DISPLAY_BLANK=y # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set CONFIG_APM_REAL_MODE_POWER_OFF=y # # ACPI Support # CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_RELAXED_AML=y I got this errors: Linux version 2.4.22-pre10 (ruben@work) (gcc-Version 3.3.1 20030626 (Debian prerelease)) #1 Sam Aug 2 23:03:02 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff79000 (ACPI data) BIOS-e820: 000000001ff79000 - 000000001ff7b000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 130912 zone(0): 4096 pages. zone(1): 126816 pages. zone(2): 0 pages. ACPI: RSDP (v002 IBM ) @ 0x000f6d40 ACPI: XSDT (v001 IBM TP-1P 00000.04352) @ 0x1ff6f4f3 ACPI: FADT (v003 IBM TP-1P 00000.04352) @ 0x1ff6f600 ACPI: SSDT (v001 IBM TP-1P 00000.04352) @ 0x1ff6f7b4 ACPI: ECDT (v001 IBM TP-1P 00000.04352) @ 0x1ff78e96 ACPI: TCPA (v001 IBM TP-1P 00000.04352) @ 0x1ff78ee8 ACPI: BOOT (v001 IBM TP-1P 00000.04352) @ 0x1ff78fd8 ACPI: DSDT (v001 IBM TP-1P 00000.04352) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present IBM machine detected. Enabling interrupts during APM calls. Kernel command line: BOOT_IMAGE=Linux ro root=302 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1498.758 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2988.44 BogoMIPS Memory: 514204k/523648k available (2185k kernel code, 9056k reserved, 773k data, 136k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000 CPU: Common caps: a7e9fbbf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1498.7099 MHz. ..... host bus clock speed is 99.9140 MHz. cpu: 0, clocks: 999140, slice: 499570 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030619 PCI: PCI BIOS revision 2.10 entry at 0xfd936, last bus=5 PCI: Using configuration type 1 ACPI: Found ECDT schedule_task(): keventd has not started ACPI-0165: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it. ACPI-0168: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) schedule_task(): keventd has not started ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.11 Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled kmod: failed to exec /sbin/modprobe -s -k parport_lowlevel, errno = 2 lp: driver loaded but no devices found Real Time Clock Driver v1.10e Non-volatile memory driver v1.2 i810_rng: RNG not detected Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: loaded (max 8 devices) Intel(R) PRO/100 Network Driver - version 2.3.18-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel(R) 855PM chipset agpgart: AGP aperture is 256M @ 0xd0000000 [drm] AGP 0.99 on Unknown @ 0xd0000000 256MB [drm] Initialized radeon 1.1.1 20010405 on minor 0 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23EA-60B, ATA DISK drive blk: queue c0434aa0, I/O limit 4095Mb (mask 0xffffffff) hdc: MATSHITADVD-RAM UJ-810, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 117210240 sectors (60012 MB) w/2048KiB Cache, CHS=7752/240/63, UDMA(100) hdc: attached ide-cdrom driver. hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 hda4 < hda5 > SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Intel 810 + AC97 Audio, version 0.24, 23:08:14 Aug 2 2003 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800, IRQ 5 i810: Intel ICH4 mmio at 0xe0868c00 and 0xe086a800 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ADS116 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 9, pci mem e086c000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:1d.7 PCI cache line size corrected to 32. ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected host/uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 host/uhci.c: USB UHCI at I/O 0x1800, IRQ 9 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 host/uhci.c: USB UHCI at I/O 0x1820, IRQ 11 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 host/uhci.c: USB UHCI at I/O 0x1840, IRQ 10 usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 14 Linux I2O PCI support (c) 1999 Red Hat Software. i2o: Checking for PCI I2O controllers... I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software I2O Block Storage OSM v0.9 (c) Copyright 1999-2001 Red Hat Software. i2o_block: Checking for Boot device... i2o_block: Checking for I2O Block devices... I2O LAN OSM (C) 1999 University of Helsinki. i2o_scsi.c: Version 0.0.1 chain_pool: 0 bytes @ dfd24680 (512 byte buffers X 4 can_queue X 0 i2o controllers) Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 136k freed Adding Swap: 1050836k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal usb.c: registered new driver usbkbd usbkbd.c: :USB HID Boot Protocol keyboard driver Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta IRQ list 0098, PCI irq11 Socket status: 30000007 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.AC__._PSR] (Node c15ba320), AE_TIME ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node c15bbec0), AE_TIME ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node c15ba220), AE_TIME ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1121: *** Error: Method execution failed [\_PR_.CPU_._PPC] (Node c158d960), AE_TIME ACPI: Processor [CPU] (supports C1 C2 C3, 6 performance states, 8 throttling states) ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1121: *** Error: Method execution failed [\_TZ_.THM0._TMP] (Node c15b5920), AE_TIME After this I try patching 2.4.20-pre10 with the latest acpi patches result : -o vmlinux arch/i386/kernel/kernel.o(.text.init+0x3c44): In function `abit_apic_required': : undefined reference to `enable_apic_up' arch/i386/kernel/kernel.o(.text.init+0x3c82): In function `abit_apic_required': : undefined reference to `enable_apic_up' arch/i386/kernel/kernel.o(.text.init+0x3fc0): In function `force_apic': : undefined reference to `enable_apic_up' make: *** [vmlinux] Error 1 The config was nearly the same. thanks for help Ruben -- Ruben Puettmann ruben@puettmann.net http://www.puettmann.net - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/