Date: Thu, 7 Aug 2003 18:20:46 +0200 (MET DST)
From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
To: Ian Chilton <ian@ichilton.co.uk>
cc: <linux-kernel@vger.kernel.org>
Subject: Re: DMA problem with 2.4.21 and 2.4.22-rc1
In-Reply-To: <20030807160938.GC31296@roadrunner.ichilton.net>
Message-ID: <Pine.SOL.4.30.0308071819200.26811-100000@mion.elka.pw.edu.pl>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1117
Lines: 48


You don't have driver for you ide chipset compiled in.

--bartlomiej

On Thu, 7 Aug 2003, Ian Chilton wrote:

> Hello,
>
> [Please cc me in on any replies]
>
>
> I am having problems getting a box into DMA mode with 2.4.21 and
> 2.4.22-rc1:
>
> [root@baloo:~]# hdparm -d1 /dev/hda
>
> /dev/hda:
>  setting using_dma to 1 (on)
>  HDIO_SET_DMA failed: Operation not permitted
>  using_dma    =  0 (off)
>
>
> Relevent dmesg stuff:
>
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> hda: C/H/S=19158/16/255 from BIOS ignored
> hda: WDC WD400JB-00ENA0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: attached ide-disk driver.
> hda: host protected area => 1
> hda: 78165360 sectors (40021 MB) w/8192KiB Cache, CHS=77545/16/63
>
>
> Any ideas?
>
>
> Thanks!
>
> --ian

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/