Received: by 10.223.185.111 with SMTP id b44csp823505wrg; Fri, 9 Mar 2018 14:34:29 -0800 (PST) X-Google-Smtp-Source: AG47ELs6K3ui8xI+1ua0afpDKbLy7xVdzphjkJwh2LbqEjPToLSlHXeTaVyxqryUlugf27ayYZvO X-Received: by 2002:a17:902:28c3:: with SMTP id f61-v6mr72279plb.346.1520634869225; Fri, 09 Mar 2018 14:34:29 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1520634869; cv=none; d=google.com; s=arc-20160816; b=yB3pRsnHGZ8B53nMvpZwinFURZWJgA9YKzS3ESFWr44ddmacOs/wgWL9p7txwBlfxp 2RkendcErqmVawYJHj8QkHfAAB0E8+Nit6rwRfEZvWaR/mq0kvLoDHqqcE7bJVTkbjP0 gWkvU/mREQv/+UIw+9uN6pFLUBANhYm0fXoyj4nrEQ5lyXsd1bsOg1CnYioY1Da6Ihgj 4bZa6TBvTLJhlte6L4ZpncbIcrpZcCd9MtZY/qIW2C5FOQ6ohYXhwsV8/J0qhKaCZnnZ zU0F7jOuTX9fZ9tcWZrAMpPKVsd58nJpYl4FntyIAlatisp5vPvlgya/JS6ML3EafEiG +9SQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:arc-authentication-results; bh=DU9ruPnI0d1Of1qb7tyuUqSlzNqHkKeTFNPTtIlOSKA=; b=WDV/owzsvVrzzH62/UHgkcPIgrX3EhW7yb9J7SfbLZODvnP1kMGT5t8nlpYqYJgnKI znFAPBw0vmnZSVdmRcu9y6dfaoPCqPJM20USm/5eqdDH9BrtlZXPsNcytOZd6pf+pZk5 VJTQZmFp0RiLKbwKO5TGUdgAxrBlDxQBzTIoto6h62ewRcWcC+r4SbeoEm05Cr2148eC dVnhiOn+mbruweD/rDQj/pz8W6/lTP4BkQWlZ+Atp1O7JEnFoJ0H7AXVxznNwIcPoXZi 06aoidZLJcZYMaoNaWv5Ixpg0wRahA4OfXF7uMFDj7/5YCJGyZlpg99YzMYfvVQHOI2R rcxw== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=collabora.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id p6si1602450pfg.96.2018.03.09.14.34.14; Fri, 09 Mar 2018 14:34:29 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=collabora.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932868AbeCIWYD (ORCPT + 99 others); Fri, 9 Mar 2018 17:24:03 -0500 Received: from bhuna.collabora.co.uk ([46.235.227.227]:42314 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932795AbeCIWX7 (ORCPT ); Fri, 9 Mar 2018 17:23:59 -0500 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: eballetbo) with ESMTPSA id 3338B2792CC From: Enric Balletbo i Serra To: architt@codeaurora.org, inki.dae@samsung.com, thierry.reding@gmail.com, hjc@rock-chips.com, seanpaul@chromium.org, airlied@linux.ie, tfiga@chromium.org, heiko@sntech.de Cc: dri-devel@lists.freedesktop.org, dianders@chromium.org, a.hajda@samsung.com, ykk@rock-chips.com, kernel@collabora.com, m.szyprowski@samsung.com, linux-samsung-soc@vger.kernel.org, jy0922.shim@samsung.com, rydberg@bitmath.org, krzk@kernel.org, linux-rockchip@lists.infradead.org, kgene@kernel.org, linux-input@vger.kernel.org, orjan.eide@arm.com, wxt@rock-chips.com, jeffy.chen@rock-chips.com, linux-arm-kernel@lists.infradead.org, mark.yao@rock-chips.com, wzz@rock-chips.com, hl@rock-chips.com, jingoohan1@gmail.com, sw0312.kim@samsung.com, linux-kernel@vger.kernel.org, kyungmin.park@samsung.com, Laurent.pinchart@ideasonboard.com, kuankuan.y@gmail.com, hshi@chromium.org, Enric Balletbo i Serra Subject: [PATCH v5 05/36] drm/bridge: analogix_dp: add fast link train for eDP Date: Fri, 9 Mar 2018 23:22:56 +0100 Message-Id: <20180309222327.18689-6-enric.balletbo@collabora.com> X-Mailer: git-send-email 2.16.1 In-Reply-To: <20180309222327.18689-1-enric.balletbo@collabora.com> References: <20180309222327.18689-1-enric.balletbo@collabora.com> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: zain wang We would meet a short black screen when exit PSR with the full link training, In this case, we should use fast link train instead of full link training. Signed-off-by: zain wang Signed-off-by: Sean Paul Signed-off-by: Thierry Escande Signed-off-by: Enric Balletbo i Serra Tested-by: Marek Szyprowski --- drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 142 ++++++++++++++++----- drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 + 2 files changed, 114 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index ee00d3d920e0..806c3878b3d6 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -10,17 +10,18 @@ * option) any later version. */ -#include -#include -#include #include -#include +#include +#include +#include #include +#include +#include +#include #include #include -#include -#include #include +#include #include #include @@ -35,6 +36,8 @@ #define to_dp(nm) container_of(nm, struct analogix_dp_device, nm) +static const bool verify_fast_training; + struct bridge_init { struct i2c_client *client; struct device_node *node; @@ -528,7 +531,7 @@ static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) { int lane, lane_count, retval; u32 reg; - u8 link_align, link_status[2], adjust_request[2]; + u8 link_align, link_status[2], adjust_request[2], spread; usleep_range(400, 401); @@ -571,6 +574,20 @@ static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) dev_dbg(dp->dev, "final lane count = %.2x\n", dp->link_train.lane_count); + retval = drm_dp_dpcd_readb(&dp->aux, DP_MAX_DOWNSPREAD, + &spread); + if (retval != 1) { + dev_err(dp->dev, "failed to read downspread %d\n", + retval); + dp->fast_train_support = false; + } else { + dp->fast_train_support = + (spread & DP_NO_AUX_HANDSHAKE_LINK_TRAINING) ? + true : false; + } + dev_dbg(dp->dev, "fast link training %s\n", + dp->fast_train_support ? "supported" : "unsupported"); + /* set enhanced mode if available */ analogix_dp_set_enhanced_mode(dp); dp->link_train.lt_state = FINISHED; @@ -627,10 +644,12 @@ static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp, *lane_count = DPCD_MAX_LANE_COUNT(data); } -static void analogix_dp_init_training(struct analogix_dp_device *dp, - enum link_lane_count_type max_lane, - int max_rate) +static int analogix_dp_full_link_train(struct analogix_dp_device *dp, + u32 max_lanes, u32 max_rate) { + int retval = 0; + bool training_finished = false; + /* * MACRO_RST must be applied after the PLL_LOCK to avoid * the DP inter pair skew issue for at least 10 us @@ -656,18 +675,13 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp, } /* Setup TX lane count & rate */ - if (dp->link_train.lane_count > max_lane) - dp->link_train.lane_count = max_lane; + if (dp->link_train.lane_count > max_lanes) + dp->link_train.lane_count = max_lanes; if (dp->link_train.link_rate > max_rate) dp->link_train.link_rate = max_rate; /* All DP analog module power up */ analogix_dp_set_analog_power_down(dp, POWER_ALL, 0); -} - -static int analogix_dp_sw_link_training(struct analogix_dp_device *dp) -{ - int retval = 0, training_finished = 0; dp->link_train.lt_state = START; @@ -702,22 +716,88 @@ static int analogix_dp_sw_link_training(struct analogix_dp_device *dp) return retval; } -static int analogix_dp_set_link_train(struct analogix_dp_device *dp, - u32 count, u32 bwtype) +static int analogix_dp_fast_link_train(struct analogix_dp_device *dp) { - int i; - int retval; + int i, ret; + u8 link_align, link_status[2]; + enum pll_status status; - for (i = 0; i < DP_TIMEOUT_LOOP_COUNT; i++) { - analogix_dp_init_training(dp, count, bwtype); - retval = analogix_dp_sw_link_training(dp); - if (retval == 0) - break; + analogix_dp_reset_macro(dp); + + analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate); + analogix_dp_set_lane_count(dp, dp->link_train.lane_count); - usleep_range(100, 110); + for (i = 0; i < dp->link_train.lane_count; i++) { + analogix_dp_set_lane_link_training(dp, + dp->link_train.training_lane[i], i); } - return retval; + ret = readx_poll_timeout(analogix_dp_get_pll_lock_status, dp, status, + status != PLL_UNLOCKED, 120, + 120 * DP_TIMEOUT_LOOP_COUNT); + if (ret) { + DRM_DEV_ERROR(dp->dev, "Wait for pll lock failed %d\n", ret); + return ret; + } + + /* source Set training pattern 1 */ + analogix_dp_set_training_pattern(dp, TRAINING_PTN1); + /* From DP spec, pattern must be on-screen for a minimum 500us */ + usleep_range(500, 600); + + analogix_dp_set_training_pattern(dp, TRAINING_PTN2); + /* From DP spec, pattern must be on-screen for a minimum 500us */ + usleep_range(500, 600); + + /* TODO: enhanced_mode?*/ + analogix_dp_set_training_pattern(dp, DP_NONE); + + /* + * Useful for debugging issues with fast link training, disable for more + * speed + */ + if (verify_fast_training) { + ret = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED, + &link_align); + if (ret < 0) { + DRM_DEV_ERROR(dp->dev, "Read align status failed %d\n", + ret); + return ret; + } + + ret = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, + 2); + if (ret < 0) { + DRM_DEV_ERROR(dp->dev, "Read link status failed %d\n", + ret); + return ret; + } + + if (analogix_dp_clock_recovery_ok(link_status, + dp->link_train.lane_count)) { + DRM_DEV_ERROR(dp->dev, "Clock recovery failed\n"); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + + if (analogix_dp_channel_eq_ok(link_status, link_align, + dp->link_train.lane_count)) { + DRM_DEV_ERROR(dp->dev, "Channel EQ failed\n"); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + } + + return 0; +} + +static int analogix_dp_train_link(struct analogix_dp_device *dp) +{ + if (dp->fast_train_support) + return analogix_dp_fast_link_train(dp); + + return analogix_dp_full_link_train(dp, dp->video_info.max_lane_count, + dp->video_info.max_link_rate); } static int analogix_dp_config_video(struct analogix_dp_device *dp) @@ -846,10 +926,10 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) DRM_ERROR("failed to disable the panel\n"); } - ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count, - dp->video_info.max_link_rate); + ret = readx_poll_timeout(analogix_dp_train_link, dp, ret, !ret, 100, + DP_TIMEOUT_TRAINING_US * 5); if (ret) { - dev_err(dp->dev, "unable to do link train\n"); + dev_err(dp->dev, "unable to do link train, ret=%d\n", ret); return; } diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h index e135a42cb19e..920607d7eb3e 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h @@ -20,6 +20,8 @@ #define MAX_CR_LOOP 5 #define MAX_EQ_LOOP 5 +/* Training takes 22ms if AUX channel comm fails. Use this as retry interval */ +#define DP_TIMEOUT_TRAINING_US 22000 #define DP_TIMEOUT_PSR_LOOP_MS 300 /* DP_MAX_LANE_COUNT */ @@ -171,6 +173,7 @@ struct analogix_dp_device { int hpd_gpio; bool force_hpd; bool psr_enable; + bool fast_train_support; struct mutex panel_lock; bool panel_is_modeset; -- 2.16.1