Received: by 10.213.65.68 with SMTP id h4csp367362imn; Tue, 13 Mar 2018 06:59:24 -0700 (PDT) X-Google-Smtp-Source: AG47ELtBGxx+1w8w25KdZDDzTUKSaSPJz64MmVOUN4o1Jpqhg5VuZ+a466c/S9VQUs/hOYNpTFGX X-Received: by 10.99.172.10 with SMTP id v10mr533199pge.341.1520949564475; Tue, 13 Mar 2018 06:59:24 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1520949564; cv=none; d=google.com; s=arc-20160816; b=WrL3y3oHKvC6N9KcV9Lt8MwFZi4ZFprYJK4VsPATZNzduJCZkkwX4J40JlUuQF0oyo SSJWiUVmg1dEWvqh7+QgRzKu3+F2+qIBvakBw298sY6AqvQ4qvcynuuG/MFCKbmM6p6h FMT+TNuNNRseV9T+fYcsXyCi0TsMRAiLDa9/UwTn2UtnRQWltFt8heYOT9gAc+cXHdCr iZDWrJ6K8W6yN2/hJGarxJy8qVJ1HNSeCu6FXvxQmUOs7avofJm9TXAMTby+jkayD48a fyD9GrergdmQqHbovU3863Hevs5Nzzx7ZDlvoVGuYJChz/bL0JwB3C6rgJOCcABL6KtF xo0Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:arc-authentication-results; bh=JULY00uGSaZXO3DPctiVAUzQWgzLH+aOIuXjkOfXNlM=; b=wY5jUQIWaJ89CKJyQGw+78dfvw0UtYY4kp0K2wx5/Xgzz3wX1mw0/milVdtXvxupls flJCPm0ya7cDYTukZaWpd2sWo3uRHkhMY//DcwLJSbjVK6KW7gDGPHa1pkk92p1/jP0o YvTvtwIhFZnesjwBJxp3qeOIzBt71MpY3SN3zzDpbcKMs/MW+t26sWDnowV/rxOWkQmR jAud4CgZjvbdXHa/5/A0jRR85lFP6ULscZ6nKjL0kBnFgkluX2CXIb5asxHEzbD+4zwL h6L4ch7/M0lQsRuToSivG8JpWXDmsDR9JMPntrO4PvF/b/XjdKvo1GfPcQgCTd8L8eKI Njug== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id m39-v6si147992plg.447.2018.03.13.06.59.10; Tue, 13 Mar 2018 06:59:24 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752900AbeCMNuw (ORCPT + 99 others); Tue, 13 Mar 2018 09:50:52 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:58029 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751723AbeCMNup (ORCPT ); Tue, 13 Mar 2018 09:50:45 -0400 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id w2DDmdrP030608; Tue, 13 Mar 2018 14:50:26 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2gpc5s96x1-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 13 Mar 2018 14:50:26 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 1FCBB3A; Tue, 13 Mar 2018 13:50:24 +0000 (GMT) Received: from Webmail-eu.st.com (Safex1hubcas23.st.com [10.75.90.46]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 7DB2255D3; Tue, 13 Mar 2018 13:50:23 +0000 (GMT) Received: from SAFEX1HUBCAS21.st.com (10.75.90.44) by SAFEX1HUBCAS23.st.com (10.75.90.46) with Microsoft SMTP Server (TLS) id 14.3.361.1; Tue, 13 Mar 2018 14:50:23 +0100 Received: from localhost (10.201.23.68) by Webmail-ga.st.com (10.75.90.48) with Microsoft SMTP Server (TLS) id 14.3.361.1; Tue, 13 Mar 2018 14:50:21 +0100 From: yannick fertre To: Vikas Manocha , Tom Rini , Benjamin Gaignard , Yannick Fertre , Philippe Cornu , "Patrice Chotard" , Patrick DELAUNAY , Christophe KERELLO , Archit Taneja , Andrzej Hajda , "Laurent Pinchart" , David Airlie , Brian Norris , Bhumika Goyal , Gustavo Padovan , "Maarten Lankhorst" , Sean Paul , Albert Aribaud , "Simon Glass" , Anatolij Gustschin , Thierry Reding CC: , , Subject: [PATCH v3 02/10] video: add support of MIPI DSI interface Date: Tue, 13 Mar 2018 14:50:02 +0100 Message-ID: <1520949014-21468-4-git-send-email-yannick.fertre@st.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1520949014-21468-1-git-send-email-yannick.fertre@st.com> References: <1520949014-21468-1-git-send-email-yannick.fertre@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.201.23.68] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2018-03-13_07:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Mipi_display.c contains a set of dsi helpers. This file is a copy of file drm_mipi_dsi.c (linux kernel). Signed-off-by: yannick fertre --- drivers/video/Kconfig | 7 + drivers/video/Makefile | 1 + drivers/video/mipi_display.c | 807 +++++++++++++++++++++++++++++++++++++++++++ include/mipi_display.h | 257 +++++++++++++- 4 files changed, 1071 insertions(+), 1 deletion(-) create mode 100644 drivers/video/mipi_display.c diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 2fc0def..1981298 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -75,6 +75,13 @@ config VIDEO_ANSI Enable ANSI escape sequence decoding for a more fully functional console. +config VIDEO_MIPI_DSI + bool "Support MIPI DSI interface" + depends on DM_VIDEO + default y if DM_VIDEO + help + Support MIPI DSI interface for driving a MIPI compatible LCD panel. + config CONSOLE_NORMAL bool "Support a simple text console" depends on DM_VIDEO diff --git a/drivers/video/Makefile b/drivers/video/Makefile index dfafe08..6f42cca 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_FORMIKE) += formike.o obj-$(CONFIG_LG4573) += lg4573.o obj-$(CONFIG_AM335X_LCD) += am335x-fb.o obj-$(CONFIG_VIDEO_DW_HDMI) += dw_hdmi.o +obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_display.o obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o obj-${CONFIG_VIDEO_TEGRA124} += tegra124/ obj-${CONFIG_EXYNOS_FB} += exynos/ diff --git a/drivers/video/mipi_display.c b/drivers/video/mipi_display.c new file mode 100644 index 0000000..d90ff5d --- /dev/null +++ b/drivers/video/mipi_display.c @@ -0,0 +1,807 @@ +/* + * MIPI DSI Bus + * + * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. + * Copyright (C) 2018 STMicroelectronics - All Rights Reserved + * Andrzej Hajda + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include +#include + +/** + * DOC: dsi helpers + * + * These functions contain some common logic and helpers to deal with MIPI DSI + * peripherals. + * + * Helpers are provided for a number of standard MIPI DSI command as well as a + * subset of the MIPI DCS command set. + */ + +/** + * mipi_dsi_attach - attach a DSI device to its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_attach(struct mipi_dsi_device *dsi) +{ + const struct mipi_dsi_host_ops *ops = dsi->host->ops; + + if (!ops || !ops->attach) + return -ENOSYS; + + return ops->attach(dsi->host, dsi); +} +EXPORT_SYMBOL(mipi_dsi_attach); + +/** + * mipi_dsi_detach - detach a DSI device from its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_detach(struct mipi_dsi_device *dsi) +{ + const struct mipi_dsi_host_ops *ops = dsi->host->ops; + + if (!ops || !ops->detach) + return -ENOSYS; + + return ops->detach(dsi->host, dsi); +} +EXPORT_SYMBOL(mipi_dsi_detach); + +static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi, + struct mipi_dsi_msg *msg) +{ + const struct mipi_dsi_host_ops *ops = dsi->host->ops; + + if (!ops || !ops->transfer) + return -ENOSYS; + + if (dsi->mode_flags & MIPI_DSI_MODE_LPM) + msg->flags |= MIPI_DSI_MSG_USE_LPM; + + return ops->transfer(dsi->host, msg); +} + +/** + * mipi_dsi_packet_format_is_short - check if a packet is of the short format + * @type: MIPI DSI data type of the packet + * + * Return: true if the packet for the given data type is a short packet, false + * otherwise. + */ +bool mipi_dsi_packet_format_is_short(u8 type) +{ + switch (type) { + case MIPI_DSI_V_SYNC_START: + case MIPI_DSI_V_SYNC_END: + case MIPI_DSI_H_SYNC_START: + case MIPI_DSI_H_SYNC_END: + case MIPI_DSI_END_OF_TRANSMISSION: + case MIPI_DSI_COLOR_MODE_OFF: + case MIPI_DSI_COLOR_MODE_ON: + case MIPI_DSI_SHUTDOWN_PERIPHERAL: + case MIPI_DSI_TURN_ON_PERIPHERAL: + case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: + case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: + case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: + case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: + case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: + case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: + case MIPI_DSI_DCS_SHORT_WRITE: + case MIPI_DSI_DCS_SHORT_WRITE_PARAM: + case MIPI_DSI_DCS_READ: + case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: + return true; + } + + return false; +} +EXPORT_SYMBOL(mipi_dsi_packet_format_is_short); + +/** + * mipi_dsi_packet_format_is_long - check if a packet is of the long format + * @type: MIPI DSI data type of the packet + * + * Return: true if the packet for the given data type is a long packet, false + * otherwise. + */ +bool mipi_dsi_packet_format_is_long(u8 type) +{ + switch (type) { + case MIPI_DSI_NULL_PACKET: + case MIPI_DSI_BLANKING_PACKET: + case MIPI_DSI_GENERIC_LONG_WRITE: + case MIPI_DSI_DCS_LONG_WRITE: + case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20: + case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24: + case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16: + case MIPI_DSI_PACKED_PIXEL_STREAM_30: + case MIPI_DSI_PACKED_PIXEL_STREAM_36: + case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12: + case MIPI_DSI_PACKED_PIXEL_STREAM_16: + case MIPI_DSI_PACKED_PIXEL_STREAM_18: + case MIPI_DSI_PIXEL_STREAM_3BYTE_18: + case MIPI_DSI_PACKED_PIXEL_STREAM_24: + return true; + } + + return false; +} +EXPORT_SYMBOL(mipi_dsi_packet_format_is_long); + +/** + * mipi_dsi_create_packet - create a packet from a message according to the + * DSI protocol + * @packet: pointer to a DSI packet structure + * @msg: message to translate into a packet + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, + const struct mipi_dsi_msg *msg) +{ + if (!packet || !msg) + return -EINVAL; + + /* do some minimum sanity checking */ + if (!mipi_dsi_packet_format_is_short(msg->type) && + !mipi_dsi_packet_format_is_long(msg->type)) + return -EINVAL; + + if (msg->channel > 3) + return -EINVAL; + + memset(packet, 0, sizeof(*packet)); + packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f); + + /* TODO: compute ECC if hardware support is not available */ + + /* + * Long write packets contain the word count in header bytes 1 and 2. + * The payload follows the header and is word count bytes long. + * + * Short write packets encode up to two parameters in header bytes 1 + * and 2. + */ + if (mipi_dsi_packet_format_is_long(msg->type)) { + packet->header[1] = (msg->tx_len >> 0) & 0xff; + packet->header[2] = (msg->tx_len >> 8) & 0xff; + + packet->payload_length = msg->tx_len; + packet->payload = msg->tx_buf; + } else { + const u8 *tx = msg->tx_buf; + + packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0; + packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0; + } + + packet->size = sizeof(packet->header) + packet->payload_length; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_create_packet); + +/* + * mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the + * the payload in a long packet transmitted from the peripheral back to the + * host processor + * @dsi: DSI peripheral device + * @value: the maximum size of the payload + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, + u16 value) +{ + u8 tx[2] = { value & 0xff, value >> 8 }; + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, + .tx_len = sizeof(tx), + .tx_buf = tx, + }; + int ret = mipi_dsi_device_transfer(dsi, &msg); + + return (ret < 0) ? ret : 0; +} +EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size); + +/** + * mipi_dsi_generic_write() - transmit data using a generic write packet + * @dsi: DSI peripheral device + * @payload: buffer containing the payload + * @size: size of payload buffer + * + * This function will automatically choose the right data type depending on + * the payload length. + * + * Return: The number of bytes transmitted on success or a negative error code + * on failure. + */ +ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, + size_t size) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .tx_buf = payload, + .tx_len = size + }; + + switch (size) { + case 0: + msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM; + break; + + case 1: + msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM; + break; + + case 2: + msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM; + break; + + default: + msg.type = MIPI_DSI_GENERIC_LONG_WRITE; + break; + } + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_generic_write); + +/** + * mipi_dsi_generic_read() - receive data using a generic read packet + * @dsi: DSI peripheral device + * @params: buffer containing the request parameters + * @num_params: number of request parameters + * @data: buffer in which to return the received data + * @size: size of receive buffer + * + * This function will automatically choose the right data type depending on + * the number of parameters passed in. + * + * Return: The number of bytes successfully read or a negative error code on + * failure. + */ +ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, + size_t num_params, void *data, size_t size) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .tx_len = num_params, + .tx_buf = params, + .rx_len = size, + .rx_buf = data + }; + + switch (num_params) { + case 0: + msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM; + break; + + case 1: + msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM; + break; + + case 2: + msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM; + break; + + default: + return -EINVAL; + } + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_generic_read); + +/** + * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload + * @dsi: DSI peripheral device + * @data: buffer containing data to be transmitted + * @len: size of transmission buffer + * + * This function will automatically choose the right data type depending on + * the command payload length. + * + * Return: The number of bytes successfully transmitted or a negative error + * code on failure. + */ +ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, + const void *data, size_t len) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .tx_buf = data, + .tx_len = len + }; + + switch (len) { + case 0: + return -EINVAL; + + case 1: + msg.type = MIPI_DSI_DCS_SHORT_WRITE; + break; + + case 2: + msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM; + break; + + default: + msg.type = MIPI_DSI_DCS_LONG_WRITE; + break; + } + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer); + +/** + * mipi_dsi_dcs_write() - send DCS write command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer containing the command payload + * @len: command payload length + * + * This function will automatically choose the right data type depending on + * the command payload length. + * + * Return: The number of bytes successfully transmitted or a negative error + * code on failure. + */ +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, + const void *data, size_t len) +{ + ssize_t err; + size_t size; + u8 *tx; + + if (len > 0) { + size = 1 + len; + + tx = kmalloc(size, GFP_KERNEL); + if (!tx) + return -ENOMEM; + + /* concatenate the DCS command byte and the payload */ + tx[0] = cmd; + memcpy(&tx[1], data, len); + } else { + tx = &cmd; + size = 1; + } + + err = mipi_dsi_dcs_write_buffer(dsi, tx, size); + + if (len > 0) + kfree(tx); + + return err; +} +EXPORT_SYMBOL(mipi_dsi_dcs_write); + +/** + * mipi_dsi_dcs_read() - send DCS read request command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer in which to receive data + * @len: size of receive buffer + * + * Return: The number of bytes read or a negative error code on failure. + */ +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_DCS_READ, + .tx_buf = &cmd, + .tx_len = 1, + .rx_buf = data, + .rx_len = len + }; + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_dcs_read); + +/** + * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any + * given pixel format defined by the MIPI DSI + * specification + * @fmt: MIPI DSI pixel format + * + * Returns: The number of bits per pixel of the given pixel format. + */ +int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + case MIPI_DSI_FMT_RGB666: + return 24; + + case MIPI_DSI_FMT_RGB666_PACKED: + return 18; + + case MIPI_DSI_FMT_RGB565: + return 16; + } + + return -EINVAL; +} +EXPORT_SYMBOL(mipi_dsi_pixel_format_to_bpp); + +/** + * mipi_dsi_dcs_nop() - send DCS nop packet + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_nop); + +/** + * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset); + +/** + * mipi_dsi_dcs_get_power_mode() - query the display module's current power + * mode + * @dsi: DSI peripheral device + * @mode: return location for the current power mode + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode) +{ + ssize_t err; + + err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode, + sizeof(*mode)); + if (err <= 0) { + if (err == 0) + err = -ENODATA; + + return err; + } + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode); + +/** + * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: return location for the pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format) +{ + ssize_t err; + + err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format, + sizeof(*format)); + if (err <= 0) { + if (err == 0) + err = -ENODATA; + + return err; + } + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format); + +/** + * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the + * display module except interface communication + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode); + +/** + * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display + * module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode); + +/** + * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off); + +/** + * mipi_dsi_dcs_set_display_on() - start displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on); + +/** + * mipi_dsi_dcs_set_column_address() - define the column extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first column of frame memory + * @end: last column of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, + u16 end) +{ + u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload, + sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address); + +/** + * mipi_dsi_dcs_set_page_address() - define the page extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first page of frame memory + * @end: last page of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, + u16 end) +{ + u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload, + sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address); + +/** + * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect + * output signal on the TE signal line + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off); + +/** + * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect + * output signal on the TE signal line. + * @dsi: DSI peripheral device + * @mode: the Tearing Effect Output Line mode + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, + enum mipi_dsi_dcs_tear_mode mode) +{ + u8 value = mode; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value, + sizeof(value)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on); + +/** + * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format, + sizeof(format)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format); + +/** + * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for + * the Tearing Effect output signal of the display module + * @dsi: DSI peripheral device + * @scanline: scanline to use as trigger + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline) +{ + u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8, + scanline & 0xff }; + ssize_t err; + + err = mipi_dsi_generic_write(dsi, payload, sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline); + +/** + * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the + * display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, + u16 brightness) +{ + u8 payload[2] = { brightness & 0xff, brightness >> 8 }; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, + payload, sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness); + +/** + * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value + * of the display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, + u16 *brightness) +{ + ssize_t err; + + err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, + brightness, sizeof(*brightness)); + if (err <= 0) { + if (err == 0) + err = -ENODATA; + + return err; + } + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness); + +MODULE_AUTHOR("Andrzej Hajda "); +MODULE_AUTHOR("Yannick Fertre "); +MODULE_DESCRIPTION("MIPI DSI Bus"); +MODULE_LICENSE("GPL and additional rights"); diff --git a/include/mipi_display.h b/include/mipi_display.h index ddcc8ca..8f9d4a4 100644 --- a/include/mipi_display.h +++ b/include/mipi_display.h @@ -4,12 +4,16 @@ * * Copyright (C) 2010 Guennadi Liakhovetski * Copyright (C) 2006 Nokia Corporation - * Author: Imre Deak + * Copyright (C) 2018 STMicroelectronics - All Rights Reserved + * Author(s): Imre Deak + * Yannick Fertre + * Philippe Cornu * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + #ifndef MIPI_DISPLAY_H #define MIPI_DISPLAY_H @@ -115,6 +119,14 @@ enum { MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E, MIPI_DCS_SET_TEAR_SCANLINE = 0x44, MIPI_DCS_GET_SCANLINE = 0x45, + MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /* MIPI DCS 1.3 */ + MIPI_DCS_WRITE_CONTROL_DISPLAY = 0x53, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_CONTROL_DISPLAY = 0x54, /* MIPI DCS 1.3 */ + MIPI_DCS_WRITE_POWER_SAVE = 0x55, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_POWER_SAVE = 0x56, /* MIPI DCS 1.3 */ + MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /* MIPI DCS 1.3 */ MIPI_DCS_READ_DDB_START = 0xA1, MIPI_DCS_READ_DDB_CONTINUE = 0xA8, }; @@ -127,4 +139,247 @@ enum { #define MIPI_DCS_PIXEL_FMT_8BIT 2 #define MIPI_DCS_PIXEL_FMT_3BIT 1 +struct mipi_dsi_host; +struct mipi_dsi_device; + +/* request ACK from peripheral */ +#define MIPI_DSI_MSG_REQ_ACK BIT(0) +/* use Low Power Mode to transmit message */ +#define MIPI_DSI_MSG_USE_LPM BIT(1) + +/** + * struct mipi_dsi_msg - read/write DSI buffer + * @channel: virtual channel id + * @type: payload data type + * @flags: flags controlling this message transmission + * @tx_len: length of @tx_buf + * @tx_buf: data to be written + * @rx_len: length of @rx_buf + * @rx_buf: data to be read, or NULL + */ +struct mipi_dsi_msg { + u8 channel; + u8 type; + u16 flags; + + size_t tx_len; + const void *tx_buf; + + size_t rx_len; + void *rx_buf; +}; + +bool mipi_dsi_packet_format_is_short(u8 type); +bool mipi_dsi_packet_format_is_long(u8 type); + +/** + * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format + * @size: size (in bytes) of the packet + * @header: the four bytes that make up the header (Data ID, Word Count or + * Packet Data, and ECC) + * @payload_length: number of bytes in the payload + * @payload: a pointer to a buffer containing the payload, if any + */ +struct mipi_dsi_packet { + size_t size; + u8 header[4]; + size_t payload_length; + const u8 *payload; +}; + +int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, + const struct mipi_dsi_msg *msg); + +/** + * struct mipi_dsi_host_ops - DSI bus operations + * @attach: attach DSI device to DSI host + * @detach: detach DSI device from DSI host + * @transfer: transmit a DSI packet + * + * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg + * structures. This structure contains information about the type of packet + * being transmitted as well as the transmit and receive buffers. When an + * error is encountered during transmission, this function will return a + * negative error code. On success it shall return the number of bytes + * transmitted for write packets or the number of bytes received for read + * packets. + * + * Note that typically DSI packet transmission is atomic, so the .transfer() + * function will seldomly return anything other than the number of bytes + * contained in the transmit buffer on success. + */ +struct mipi_dsi_host_ops { + int (*attach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + int (*detach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + ssize_t (*transfer)(struct mipi_dsi_host *host, + const struct mipi_dsi_msg *msg); +}; + +/** + * struct mipi_dsi_host - DSI host device + * @dev: driver model device node for this DSI host + * @ops: DSI host operations + * @list: list management + */ +struct mipi_dsi_host { + struct device *dev; + const struct mipi_dsi_host_ops *ops; + struct list_head list; +}; + +/* DSI mode flags */ + +/* video mode */ +#define MIPI_DSI_MODE_VIDEO BIT(0) +/* video burst mode */ +#define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +/* video pulse mode */ +#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +/* enable auto vertical count mode */ +#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +/* enable hsync-end packets in vsync-pulse and v-porch area */ +#define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +/* disable hfront-porch area */ +#define MIPI_DSI_MODE_VIDEO_HFP BIT(5) +/* disable hback-porch area */ +#define MIPI_DSI_MODE_VIDEO_HBP BIT(6) +/* disable hsync-active area */ +#define MIPI_DSI_MODE_VIDEO_HSA BIT(7) +/* flush display FIFO on vsync pulse */ +#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +/* disable EoT packets in HS mode */ +#define MIPI_DSI_MODE_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +/* transmit data in low power */ +#define MIPI_DSI_MODE_LPM BIT(11) + +enum mipi_dsi_pixel_format { + MIPI_DSI_FMT_RGB888, + MIPI_DSI_FMT_RGB666, + MIPI_DSI_FMT_RGB666_PACKED, + MIPI_DSI_FMT_RGB565, +}; + +#define DSI_DEV_NAME_SIZE 20 + +/** + * struct mipi_dsi_device_info - template for creating a mipi_dsi_device + * @type: DSI peripheral chip type + * @channel: DSI virtual channel assigned to peripheral + * @node: pointer to OF device node or NULL + * + * This is populated and passed to mipi_dsi_device_new to create a new + * DSI device + */ +struct mipi_dsi_device_info { + char type[DSI_DEV_NAME_SIZE]; + u32 channel; + struct device_node *node; +}; + +/** + * struct mipi_dsi_device - DSI peripheral device + * @host: DSI host for this peripheral + * @dev: driver model device node for this peripheral + * @name: DSI peripheral chip type + * @channel: virtual channel assigned to the peripheral + * @format: pixel format for video mode + * @lanes: number of active data lanes + * @mode_flags: DSI operation mode related flags + */ +struct mipi_dsi_device { + struct mipi_dsi_host *host; + struct udevice *dev; + + char name[DSI_DEV_NAME_SIZE]; + unsigned int channel; + unsigned int lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; +}; + +/** + * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode + * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking + * information only + * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both + * V-Blanking and H-Blanking information + */ +enum mipi_dsi_dcs_tear_mode { + MIPI_DSI_DCS_TEAR_MODE_VBLANK, + MIPI_DSI_DCS_TEAR_MODE_VHBLANK, +}; + +/** + * struct mipi_dsi_panel_plat - DSI panel platform data + * @device: DSI peripheral device + */ +struct mipi_dsi_panel_plat { + struct mipi_dsi_device *device; +}; + +int mipi_dsi_attach(struct mipi_dsi_device *dsi); +int mipi_dsi_detach(struct mipi_dsi_device *dsi); +int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt); + +/* bit compatible with the xrandr RR_ definitions (bits 0-13) + * + * ABI warning: Existing userspace really expects + * the mode flags to match the xrandr definitions. Any + * changes that don't match the xrandr definitions will + * likely need a new client cap or some other mechanism + * to avoid breaking existing userspace. This includes + * allocating new flags in the previously unused bits! + */ +#define MIPI_DSI_FLAG_PHSYNC BIT(0) +#define MIPI_DSI_FLAG_NHSYNC BIT(1) +#define MIPI_DSI_FLAG_PVSYNC BIT(2) +#define MIPI_DSI_FLAG_NVSYNC BIT(3) +#define MIPI_DSI_FLAG_INTERLACE BIT(4) +#define MIPI_DSI_FLAG_DBLSCAN BIT(5) +#define MIPI_DSI_FLAG_CSYNC BIT(6) +#define MIPI_DSI_FLAG_PCSYNC BIT(7) +#define MIPI_DSI_FLAG_NCSYNC BIT(8) +#define MIPI_DSI_FLAG_HSKEW BIT(9) /* hskew provided */ +#define MIPI_DSI_FLAG_BCAST BIT(10) +#define MIPI_DSI_FLAG_PIXMUX BIT(11) +#define MIPI_DSI_FLAG_DBLCLK BIT(12) +#define MIPI_DSI_FLAG_CLKDIV2 BIT(13) + +/* request ACK from peripheral */ +#define MIPI_DSI_MSG_REQ_ACK BIT(0) +/* use Low Power Mode to transmit message */ +#define MIPI_DSI_MSG_USE_LPM BIT(1) + +ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, + const void *data, size_t len); +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, + const void *data, size_t len); +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len); +int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); +int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); +int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, + enum mipi_dsi_dcs_tear_mode mode); +int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); +int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline); +int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, + u16 brightness); +int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, + u16 *brightness); + #endif -- 1.9.1