Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Paul Cercueil <paul@crapouillou.net>
To:     Thomas Gleixner <tglx@linutronix.de>,
        Jason Cooper <jason@lakedaemon.net>,
        Marc Zyngier <marc.zyngier@arm.com>,
        Lee Jones <lee.jones@linaro.org>,
        Daniel Lezcano <daniel.lezcano@linaro.org>,
        Ralf Baechle <ralf@linux-mips.org>,
        Rob Herring <robh+dt@kernel.org>,
        Jonathan Corbet <corbet@lwn.net>,
        Mark Rutland <mark.rutland@arm.com>
Cc:     James Hogan <jhogan@kernel.org>,
        Maarten ter Huurne <maarten@treewalker.org>,
        linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
        linux-doc@vger.kernel.org, Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v4 6/8] clk: ingenic: Add JZ47xx TCU clocks driver
Date:   Sun, 18 Mar 2018 00:28:59 +0100
Message-Id: <20180317232901.14129-7-paul@crapouillou.net>
In-Reply-To: <20180317232901.14129-1-paul@crapouillou.net>
References: <20180110224838.16711-2-paul@crapouillou.net>
 <20180317232901.14129-1-paul@crapouillou.net>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The TCU (Timer Counter Unit) of the Ingenic JZ47xx SoCs features 8
channels, each one having its own clock, that can be started and
stopped, reparented, and reclocked.

This driver only modifies the bits of the registers of the TCU that are
related to clocks control. It provides one clock per TCU channel (plus
one for the watchdog and one for the OS timer) that can be used by other
drivers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/Makefile |   2 +-
 drivers/clk/ingenic/tcu.c    | 319 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 320 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ingenic/tcu.c

 v2: - Use SPDX identifier for the license
     - Fix broken build caused by typo when correcting patch
 v3: - Move documentation to its own patch
     - Get rid of ingenic_tcu structure. The "struct regmap *map" was
	   added to struct ingenic_tcu_clk, the other fields are gone.
	 - Replace clk_register / clk_register_clockdev /
	   of_clk_add_provider with their "clk_hw" variant.
 v4: No change

diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index 1456e4cdb562..9dcadd4fed4c 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,4 +1,4 @@
-obj-y				+= cgu.o
+obj-y				+= cgu.o tcu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_MACH_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
new file mode 100644
index 000000000000..b550b6ac8fb4
--- /dev/null
+++ b/drivers/clk/ingenic/tcu.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx SoC TCU clocks driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+enum ingenic_version {
+	ID_JZ4740,
+	ID_JZ4770,
+	ID_JZ4780,
+};
+
+struct ingenic_tcu_clk_info {
+	struct clk_init_data init_data;
+	u8 gate_bit;
+	u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+	struct clk_hw hw;
+
+	struct regmap *map;
+	const struct ingenic_tcu_clk_info *info;
+
+	unsigned int idx;
+};
+
+#define to_tcu_clk(_hw) container_of(_hw, struct ingenic_tcu_clk, hw)
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu_clk->map, TCU_REG_TSCR, BIT(info->gate_bit));
+	return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu_clk->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int value;
+
+	regmap_read(tcu_clk->map, TCU_REG_TSR, &value);
+
+	return !(value & BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int val = 0;
+	int ret;
+
+	ret = regmap_read(tcu_clk->map, info->tcsr_reg, &val);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	return ffs(val & TCU_TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct regmap *map = tcu_clk->map;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_PARENT_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(map, info->tcsr_reg,
+			TCU_TCSR_PARENT_CLOCK_MASK, BIT(idx));
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(map, TCU_REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int prescale;
+	int ret;
+
+	ret = regmap_read(tcu_clk->map, info->tcsr_reg, &prescale);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	prescale = (prescale & TCU_TCSR_PRESCALE_MASK) >> TCU_TCSR_PRESCALE_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	unsigned long rate = *parent_rate;
+	unsigned int shift;
+
+	if (req_rate > rate)
+		return -EINVAL;
+
+	for (shift = 0; shift < 10; shift += 2)
+		if ((rate >> shift) <= req_rate)
+			break;
+
+	return rate >> shift;
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct regmap *map = tcu_clk->map;
+	u8 prescale = (ffs(parent_rate / req_rate) / 2)
+			<< TCU_TCSR_PRESCALE_LSB;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_RATE_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(map, info->tcsr_reg,
+				TCU_TCSR_PRESCALE_MASK, prescale);
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(map, TCU_REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+	.get_parent	= ingenic_tcu_get_parent,
+	.set_parent	= ingenic_tcu_set_parent,
+
+	.recalc_rate	= ingenic_tcu_recalc_rate,
+	.round_rate	= ingenic_tcu_round_rate,
+	.set_rate	= ingenic_tcu_set_rate,
+
+	.enable		= ingenic_tcu_enable,
+	.disable	= ingenic_tcu_disable,
+	.is_enabled	= ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+	"pclk",
+	"rtc",
+	"ext",
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
+	{								\
+		.init_data = {						\
+			.name = _name,					\
+			.parent_names = ingenic_tcu_timer_parents,	\
+			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+			.ops = &ingenic_tcu_clk_ops,			\
+			.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
+		},							\
+		.gate_bit = _gate_bit,					\
+		.tcsr_reg = _tcsr,					\
+	}
+	[JZ4740_CLK_TIMER0] = DEF_TIMER("timer0", 0, TCU_REG_TCSRc(0)),
+	[JZ4740_CLK_TIMER1] = DEF_TIMER("timer1", 1, TCU_REG_TCSRc(1)),
+	[JZ4740_CLK_TIMER2] = DEF_TIMER("timer2", 2, TCU_REG_TCSRc(2)),
+	[JZ4740_CLK_TIMER3] = DEF_TIMER("timer3", 3, TCU_REG_TCSRc(3)),
+	[JZ4740_CLK_TIMER4] = DEF_TIMER("timer4", 4, TCU_REG_TCSRc(4)),
+	[JZ4740_CLK_TIMER5] = DEF_TIMER("timer5", 5, TCU_REG_TCSRc(5)),
+	[JZ4740_CLK_TIMER6] = DEF_TIMER("timer6", 6, TCU_REG_TCSRc(6)),
+	[JZ4740_CLK_TIMER7] = DEF_TIMER("timer7", 7, TCU_REG_TCSRc(7)),
+	[JZ4740_CLK_WDT]    = DEF_TIMER("wdt",   16, TCU_REG_WDT_TCSR),
+	[JZ4770_CLK_OST]    = DEF_TIMER("ost",   15, TCU_REG_OST_TCSR),
+#undef DEF_TIMER
+};
+
+static int ingenic_tcu_register_clock(struct regmap *map, unsigned int idx,
+		const struct ingenic_tcu_clk_info *info,
+		struct clk_hw_onecell_data *clocks)
+{
+	struct ingenic_tcu_clk *tcu_clk;
+	int err;
+
+	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+	if (!tcu_clk)
+		return -ENOMEM;
+
+	tcu_clk->hw.init = &info->init_data;
+	tcu_clk->idx = idx;
+	tcu_clk->info = info;
+	tcu_clk->map = map;
+
+	/* Set EXT as the default parent clock */
+	ingenic_tcu_set_parent(&tcu_clk->hw, 2);
+
+	ingenic_tcu_disable(&tcu_clk->hw);
+
+	err = clk_hw_register(NULL, &tcu_clk->hw);
+	if (err)
+		goto err_free_tcu_clk;
+
+	err = clk_hw_register_clkdev(&tcu_clk->hw, info->init_data.name, NULL);
+	if (err)
+		goto err_clk_unregister;
+
+	clocks->hws[idx] = &tcu_clk->hw;
+	return 0;
+
+err_clk_unregister:
+	clk_hw_unregister(&tcu_clk->hw);
+err_free_tcu_clk:
+	kfree(tcu_clk);
+	return err;
+}
+
+static void __init ingenic_tcu_init(struct device_node *np,
+		enum ingenic_version id)
+{
+	struct clk_hw_onecell_data *clocks;
+	struct regmap *map;
+	size_t i, nb_clks;
+	int ret = -ENOMEM;
+
+	if (id >= ID_JZ4770)
+		nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+	else
+		nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+
+	map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(map)) {
+		pr_err("%s: failed to map TCU registers\n", __func__);
+		return;
+	}
+
+	clocks = kzalloc(sizeof(*clocks) +
+					 sizeof(*clocks->hws) * nb_clks,
+					 GFP_KERNEL);
+	if (!clocks)
+		return;
+
+	clocks->num = nb_clks;
+
+	for (i = 0; i < nb_clks; i++) {
+		ret = ingenic_tcu_register_clock(map, i,
+				&ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i],
+				clocks);
+		if (ret) {
+			pr_err("%s: cannot register clocks\n", __func__);
+			goto err_unregister;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clocks);
+	if (ret) {
+		pr_err("%s: cannot add OF clock provider\n", __func__);
+		goto err_unregister;
+	}
+
+	return;
+
+err_unregister:
+	for (i = 0; i < clocks->num; i++)
+		if (clocks->hws[i])
+			clk_hw_unregister(clocks->hws[i]);
+	kfree(clocks);
+}
+
+static void __init jz4740_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4740);
+}
+
+static void __init jz4770_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4770);
+}
+
+static void __init jz4780_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4780);
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLK_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu-clocks", jz4740_tcu_init);
+CLK_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu-clocks", jz4770_tcu_init);
+CLK_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu-clocks", jz4780_tcu_init);
-- 
2.11.0