Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 2 Nov 2000 20:37:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 2 Nov 2000 20:37:38 -0500 Received: from [62.153.68.49] ([62.153.68.49]:21486 "EHLO janus.rapids.de") by vger.kernel.org with ESMTP id ; Thu, 2 Nov 2000 20:37:24 -0500 Message-ID: <3A0216C9.79F300FE@intxxx.net> Date: Fri, 03 Nov 2000 02:37:13 +0100 From: stefan mojschewitsch Organization: snafu X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.0-test9 i686) X-Accept-Language: en MIME-Version: 1.0 To: "'linux-kernel@vger.kernel.org'" Subject: Re: scsi init problem in 2.4.0-test10? In-Reply-To: <276737EB1EC5D311AB950090273BEFDD979DF6@elway.lss.emc.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org "chen, xiangping" wrote: > > Hello, > > I met a problem when trying to upgrade my Linux kernel to 2.4.0-test10. > The machine is Compay AP550, dual processor, mem 512 MB, and 863 MHZ freq. > It has two scsi host adaptors. one is AIC-7892 ultra 160/m connected to > internal hard disk, and the other is AHA-3944 ultra scsi connected to > an attached disk. The boot process stops after detection of the first > scsi host, error info is: > scsi: aborting command due to time out: pid0, scsci1, channel 0, > id 0, lun 0, Inquiry 00 00 00 ff 00 > im having this problem too with an quad ppro 166Mhz machine, but older scsi- controllers. when booting with 2.2.1[67] or 2.4.0.test[6-9] and kernelcmdline noapic, its okay. on my machine, an AIC-7870 as scsi0 is aborting, when booting with apic enabled. tnx for reading stefan -- stefan mojschewitsch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/