From: Michael Frank <mhf@linuxmail.org>
To: Matthew Peters <matthew@greycloaklabs.ca>
Subject: Re: PROBLEM: kswapd and toshiba libretto 50ct
Date: Tue, 12 Aug 2003 21:50:37 +0800
User-Agent: KMail/1.5.2
Cc: linux-kernel <linux-kernel@vger.kernel.org>
References: <Pine.LNX.4.44.0308120622050.11089-100000@gateway.greycloaklabs.ca>
In-Reply-To: <Pine.LNX.4.44.0308120622050.11089-100000@gateway.greycloaklabs.ca>
MIME-Version: 1.0
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Message-Id: <200308122150.37582.mhf@linuxmail.org>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1321
Lines: 37

On Tuesday 12 August 2003 21:24, Matthew Peters wrote:
> i have managed to resolder that pin, the kernel detects a clock speed of
> 75mhz again. The 2.4 kernels still don't work though. I've tried using
> both a modular build and one with everything tailored to the system.
>
> I don't have the oops message on hand, but i can get it if required. As
> always, i can't check it on the hardware itself.
>
> Thanks in advance,
>     Matthew

Please check
 - selected processor type: Pentium-Classic
 - compiled with gcc295 or equivalent
 - Leave frame buffers out
 - put only minimal drivers (including serial port and console on serial port)

If it still does not work, please get the oops via serial console, run
it through ksymoops, without it is not much we can do.

Regards
Michael


-- 
Powered by linux-2.6. Compiled with gcc-2.95-3 - mature and rock solid

2.4/2.6 kernel testing: ACPI PCI interrupt routing, PCI IRQ sharing, swsusp
2.6 kernel testing:     PCMCIA yenta_socket, Suspend to RAM with ACPI S1-S3

More info on swsusp: http://sourceforge.net/projects/swsusp/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/