Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Mon, 26 Mar 2018 13:25:26 +0200
From:   Boris Brezillon <boris.brezillon@bootlin.com>
To:     Geert Uytterhoeven <geert@linux-m68k.org>
Cc:     Wolfram Sang <wsa@the-dreams.de>,
        Linux I2C <linux-i2c@vger.kernel.org>,
        Jonathan Corbet <corbet@lwn.net>, linux-doc@vger.kernel.org,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Arnd Bergmann <arnd@arndb.de>,
        Przemyslaw Sroka <psroka@cadence.com>,
        Arkadiusz Golec <agolec@cadence.com>,
        Alan Douglas <adouglas@cadence.com>,
        Bartosz Folta <bfolta@cadence.com>,
        Damian Kos <dkos@cadence.com>,
        Alicja Jurasik-Urbaniak <alicja@cadence.com>,
        Cyprian Wronka <cwronka@cadence.com>,
        Suresh Punnoose <sureshp@cadence.com>,
        Rafal Ciepiela <rafalc@cadence.com>,
        Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
        Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
        Pawel Moll <pawel.moll@arm.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Kumar Gala <galak@codeaurora.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Vitor Soares <Vitor.Soares@synopsys.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Xiang Lin <Xiang.Lin@synaptics.com>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH v3 11/11] dt-bindings: gpio: Add bindings for Cadence
 I3C gpio expander
Message-ID: <20180326132526.1634946e@bbrezillon>
In-Reply-To: <CAMuHMdX3TLmaN14gM4fTgzXwy1dgsMxCFBs_3wCFWM8rX=+8vA@mail.gmail.com>
References: <20180323110020.19080-1-boris.brezillon@bootlin.com>
        <20180323110020.19080-12-boris.brezillon@bootlin.com>
        <CAMuHMdX3TLmaN14gM4fTgzXwy1dgsMxCFBs_3wCFWM8rX=+8vA@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon, 26 Mar 2018 12:12:54 +0200
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> Hi Boris,
> 
> On Fri, Mar 23, 2018 at 12:00 PM, Boris Brezillon
> <boris.brezillon@bootlin.com> wrote:
> > Document the Cadence I3C gpio expander bindings.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>  
> 
> Thanks for your patch!
> 
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt  
> 
> > +- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
> > +  The second cell bits[3:0] is used to specify trigger type and level flags:
> > +      1 = low-to-high edge triggered.
> > +      2 = high-to-low edge triggered.
> > +      3 = triggered on both edges.
> > +      4 = active high level-sensitive.
> > +      8 = active low level-sensitive.  
> 
> These are identical to the values in <dt-bindings/interrupt-controller/irq.h>.
> Perhaps you can refer to those definitions?

Well, I'm not sure this is allowed since DT bindings docs are
supposed to be OS-agnostic and macros defined in
<dt-bindings/interrupt-controller/irq.h> are, AFAIK, only available to
Linux.

Note that I copied these definitions from another binding ;-).

Rob, any opinion?


-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com