Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Sergey Suloev <ssuloev@orpaltech.com>
To:     Mark Brown <broonie@kernel.org>,
        Maxime Ripard <maxime.ripard@bootlin.com>,
        Chen-Yu Tsai <wens@csie.org>
Cc:     linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, Sergey Suloev <ssuloev@orpaltech.com>
Subject: [PATCH 6/6] spi: sun6i: add DMA transfers support
Date:   Fri, 30 Mar 2018 10:22:43 +0300
Message-Id: <20180330072243.19368-7-ssuloev@orpaltech.com>
In-Reply-To: <20180330072243.19368-1-ssuloev@orpaltech.com>
References: <20180330072243.19368-1-ssuloev@orpaltech.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

DMA transfers are now available for sun6i and sun8i SoCs.
The DMA mode is used automatically as soon as requested
transfer length is more than FIFO length.

Signed-off-by: Sergey Suloev <ssuloev@orpaltech.com>

---
 drivers/spi/spi-sun6i.c | 296 ++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 275 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index a6e6812..e74fa3d 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -14,6 +14,8 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -55,11 +57,14 @@
 
 #define SUN6I_FIFO_CTL_REG		0x18
 #define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_MASK	0xff
-#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_BITS	0
+#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_POS	0
+#define SUN6I_FIFO_CTL_RF_DRQ_EN		BIT(8)
 #define SUN6I_FIFO_CTL_RF_RST			BIT(15)
 #define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_MASK	0xff
-#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_BITS	16
+#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_POS	16
+#define SUN6I_FIFO_CTL_TF_DRQ_EN		BIT(24)
 #define SUN6I_FIFO_CTL_TF_RST			BIT(31)
+#define SUN6I_FIFO_CTL_DMA_DEDICATE		BIT(9)|BIT(25)
 
 #define SUN6I_FIFO_STA_REG		0x1c
 #define SUN6I_FIFO_STA_RF_CNT_MASK		0x7f
@@ -177,6 +182,15 @@ static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
 	}
 }
 
+static bool sun6i_spi_can_dma(struct spi_master *master,
+			      struct spi_device *spi,
+			      struct spi_transfer *tfr)
+{
+	struct sun6i_spi *sspi = spi_master_get_devdata(master);
+
+	return tfr->len > sspi->fifo_depth;
+}
+
 static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
@@ -208,6 +222,9 @@ static size_t sun6i_spi_max_transfer_size(struct spi_device *spi)
 	struct spi_master *master = spi->master;
 	struct sun6i_spi *sspi = spi_master_get_devdata(master);
 
+	if (master->can_dma)
+		return SUN6I_MAX_XFER_SIZE;
+
 	return sspi->fifo_depth;
 }
 
@@ -277,15 +294,174 @@ static int sun6i_spi_wait_for_transfer(struct spi_device *spi,
 	return 0;
 }
 
+static void sun6i_spi_dma_callback(void *param)
+{
+	struct spi_master *master = param;
+
+	dev_dbg(&master->dev, "DMA transfer complete\n");
+	spi_finalize_current_transfer(master);
+}
+
+static int sun6i_spi_dmap_prep_tx(struct spi_master *master,
+				  struct spi_transfer *tfr,
+				  dma_cookie_t *cookie)
+{
+	struct dma_async_tx_descriptor *chan_desc = NULL;
+
+	chan_desc = dmaengine_prep_slave_sg(master->dma_tx,
+					    tfr->tx_sg.sgl, tfr->tx_sg.nents,
+					    DMA_TO_DEVICE,
+					    DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!chan_desc) {
+		dev_err(&master->dev,
+			"Couldn't prepare TX DMA slave\n");
+		return -EIO;
+	}
+
+	chan_desc->callback = sun6i_spi_dma_callback;
+	chan_desc->callback_param = master;
+
+	*cookie = dmaengine_submit(chan_desc);
+	dma_async_issue_pending(master->dma_tx);
+
+	return 0;
+}
+
+static int sun6i_spi_dmap_prep_rx(struct spi_master *master,
+				  struct spi_transfer *tfr,
+				  dma_cookie_t *cookie)
+{
+	struct dma_async_tx_descriptor *chan_desc = NULL;
+
+	chan_desc = dmaengine_prep_slave_sg(master->dma_rx,
+					    tfr->rx_sg.sgl, tfr->rx_sg.nents,
+					    DMA_FROM_DEVICE,
+					    DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!chan_desc) {
+		dev_err(&master->dev,
+			"Couldn't prepare RX DMA slave\n");
+		return -EIO;
+	}
+
+	chan_desc->callback = sun6i_spi_dma_callback;
+	chan_desc->callback_param = master;
+
+	*cookie = dmaengine_submit(chan_desc);
+	dma_async_issue_pending(master->dma_rx);
+
+	return 0;
+}
+
+static int sun6i_spi_transfer_one_dma(struct spi_device *spi,
+				      struct spi_transfer *tfr)
+{
+	struct spi_master *master = spi->master;
+	struct sun6i_spi *sspi = spi_master_get_devdata(master);
+	dma_cookie_t tx_cookie = 0,rx_cookie = 0;
+	enum dma_status status;
+	int ret;
+	u32 reg, trig_level = 0;
+
+	dev_dbg(&master->dev, "Using DMA mode for transfer\n");
+
+	reg = sun6i_spi_read(sspi, SUN6I_FIFO_CTL_REG);
+
+	if (sspi->tx_buf) {
+		ret = sun6i_spi_dmap_prep_tx(master, tfr, &tx_cookie);
+		if (ret)
+			goto out;
+
+		reg |= SUN6I_FIFO_CTL_TF_DRQ_EN;
+
+		trig_level = sspi->fifo_depth;
+		reg &= ~SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_MASK;
+		reg |= (trig_level << SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_POS);
+	}
+
+	if (sspi->rx_buf) {
+		ret = sun6i_spi_dmap_prep_rx(master, tfr, &rx_cookie);
+		if (ret)
+			goto out;
+
+		reg |= SUN6I_FIFO_CTL_RF_DRQ_EN;
+
+		trig_level = 1;
+		reg &= ~SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_MASK;
+		reg |= (trig_level << SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_POS);
+	}
+
+	/* Enable Dedicated DMA requests */
+	sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
+			reg | SUN6I_FIFO_CTL_DMA_DEDICATE);
+
+	/* Start transfer */
+	sun6i_spi_set(sspi, SUN6I_TFR_CTL_REG, SUN6I_TFR_CTL_XCH);
+
+	ret = sun6i_spi_wait_for_transfer(spi, tfr);
+	if (ret)
+		goto out;
+
+	if (sspi->tx_buf && (status = dma_async_is_tx_complete(master->dma_tx,
+			tx_cookie, NULL, NULL))) {
+		dev_warn(&master->dev,
+			"DMA returned completion status of: %s\n",
+			status == DMA_ERROR ? "error" : "in progress");
+	}
+	if (sspi->rx_buf && (status = dma_async_is_tx_complete(master->dma_rx,
+			rx_cookie, NULL, NULL))) {
+		dev_warn(&master->dev,
+			"DMA returned completion status of: %s\n",
+			status == DMA_ERROR ? "error" : "in progress");
+	}
+
+out:
+	if (ret) {
+		dev_dbg(&master->dev, "DMA channel teardown\n");
+		if (sspi->tx_buf)
+			dmaengine_terminate_sync(master->dma_tx);
+		if (sspi->rx_buf)
+			dmaengine_terminate_sync(master->dma_rx);
+	}
+
+	sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);
+
+	sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
+
+	return ret;
+}
+
+static int sun6i_spi_transfer_one_pio(struct spi_device *spi,
+				      struct spi_transfer *tfr)
+{
+	struct spi_master *master = spi->master;
+	struct sun6i_spi *sspi = spi_master_get_devdata(master);
+	int ret;
+
+	/* Disable DMA requests */
+	sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG, 0);
+
+	sun6i_spi_fill_fifo(sspi, sspi->fifo_depth);
+
+	/* Enable transfer complete IRQ */
+	sun6i_spi_set(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
+
+	/* Start transfer */
+	sun6i_spi_set(sspi, SUN6I_TFR_CTL_REG, SUN6I_TFR_CTL_XCH);
+
+	ret = sun6i_spi_wait_for_transfer(spi, tfr);
+
+	sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
+
+	return ret;
+}
+
 static int sun6i_spi_transfer_one(struct spi_master *master,
 				  struct spi_device *spi,
 				  struct spi_transfer *tfr)
 {
 	struct sun6i_spi *sspi = spi_master_get_devdata(master);
-	unsigned int mclk_rate, div, timeout;
-	unsigned int start, end, tx_time;
+	unsigned int mclk_rate, div;
 	unsigned int tx_len = 0;
-	int ret = 0;
 	u32 reg;
 
 	/* A zero length transfer never finishes if programmed
@@ -293,10 +469,15 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 	if (!tfr->len)
 		return 0;
 
-	/* Don't support transfer larger than the FIFO */
-	if (tfr->len > sspi->fifo_depth)
+	if (tfr->len > SUN6I_MAX_XFER_SIZE)
 		return -EMSGSIZE;
 
+	if (!master->can_dma) {
+		/* Don't support transfer larger than the FIFO */
+		if (tfr->len > sspi->fifo_depth)
+			return -EMSGSIZE;
+	}
+
 	sspi->tx_buf = tfr->tx_buf;
 	sspi->rx_buf = tfr->rx_buf;
 	sspi->len = tfr->len;
@@ -353,21 +534,10 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 	sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG,
 			SUN6I_BURST_CTL_CNT_STC(tx_len));
 
-	/* Fill the TX FIFO */
-	sun6i_spi_fill_fifo(sspi, sspi->fifo_depth);
-
-	/* Enable transfer complete interrupt */
-	sun6i_spi_set(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
-
-	/* Start the transfer */
-	sun6i_spi_set(sspi, SUN6I_TFR_CTL_REG, SUN6I_TFR_CTL_XCH);
-
-	/* Wait for completion */
-	ret = sun6i_spi_wait_for_transfer(spi, tfr);
-
-	sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
+	if (sun6i_spi_can_dma(master, spi, tfr))
+		return sun6i_spi_transfer_one_dma(spi, tfr);
 
-	return ret;
+	return sun6i_spi_transfer_one_pio(spi, tfr);
 }
 
 static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
@@ -389,6 +559,76 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
+static int sun6i_spi_dma_setup(struct platform_device *pdev,
+			       struct resource *res)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct dma_slave_config dma_sconf;
+	int ret;
+
+	master->dma_tx = dma_request_slave_channel_reason(&pdev->dev, "tx");
+	if (IS_ERR(master->dma_tx)) {
+		dev_err(&pdev->dev, "Unable to acquire DMA TX channel\n");
+		ret = PTR_ERR(master->dma_tx);
+		goto out;
+	}
+
+	dma_sconf.direction = DMA_MEM_TO_DEV;
+	dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconf.dst_addr = res->start + SUN6I_TXDATA_REG;
+	dma_sconf.src_maxburst = 1;
+	dma_sconf.dst_maxburst = 1;
+
+	ret = dmaengine_slave_config(master->dma_tx, &dma_sconf);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to configure DMA TX slave\n");
+		goto err_rel_tx;
+	}
+
+	master->dma_rx = dma_request_slave_channel_reason(&pdev->dev, "rx");
+	if (IS_ERR(master->dma_rx)) {
+		dev_err(&pdev->dev, "Unable to acquire DMA RX channel\n");
+		ret = PTR_ERR(master->dma_rx);
+		goto err_rel_tx;
+	}
+
+	dma_sconf.direction = DMA_DEV_TO_MEM;
+	dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconf.src_addr = res->start + SUN6I_RXDATA_REG;
+	dma_sconf.src_maxburst = 1;
+	dma_sconf.dst_maxburst = 1;
+
+	ret = dmaengine_slave_config(master->dma_rx, &dma_sconf);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to configure DMA RX slave\n");
+		goto err_rel_rx;
+	}
+
+	/* don't set can_dma unless both channels are valid*/
+	master->can_dma = sun6i_spi_can_dma;
+
+	return 0;
+
+err_rel_rx:
+	dma_release_channel(master->dma_rx);
+err_rel_tx:
+	dma_release_channel(master->dma_tx);
+out:
+	master->dma_tx = NULL;
+	master->dma_rx = NULL;
+	return ret;
+}
+
+static void sun6i_spi_dma_release(struct spi_master *master)
+{
+	if (master->can_dma) {
+		dma_release_channel(master->dma_rx);
+		dma_release_channel(master->dma_tx);
+	}
+}
+
 static int sun6i_spi_runtime_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
@@ -510,6 +750,15 @@ static int sun6i_spi_probe(struct platform_device *pdev)
 		goto err_free_master;
 	}
 
+	ret = sun6i_spi_dma_setup(pdev, res);
+	if (ret) {
+		if (ret == -EPROBE_DEFER) {
+			/* wait for the dma driver to load */
+			goto err_free_master;
+		}
+		dev_warn(&pdev->dev, "DMA transfer not supported\n");
+	}
+
 	/*
 	 * This wake-up/shutdown pattern is to be able to have the
 	 * device woken up, even if runtime_pm is disabled
@@ -536,14 +785,19 @@ err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
 	sun6i_spi_runtime_suspend(&pdev->dev);
 err_free_master:
+	sun6i_spi_dma_release(master);
 	spi_master_put(master);
 	return ret;
 }
 
 static int sun6i_spi_remove(struct platform_device *pdev)
 {
+	struct spi_master *master = platform_get_drvdata(pdev);
+
 	pm_runtime_force_suspend(&pdev->dev);
 
+	sun6i_spi_dma_release(master);
+
 	return 0;
 }
 
-- 
2.16.2