Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v2] ARM: dts: BCM5301X: Make usb3 phy use mdio phy driver
To:     Vivek Unune <npcomplete13@gmail.com>, hauke@hauke-m.de,
        zajec5@gmail.com, jonmason@broadcom.com,
        bcm-kernel-feedback-list@broadcom.com, robh+dt@kernel.org,
        mark.rutland@arm.com, linux@armlinux.org.uk
Cc:     linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20180315135647.48456-1-npcomplete13@gmail.com>
 <20180409223153.41893-1-npcomplete13@gmail.com>
From:   Florian Fainelli <f.fainelli@gmail.com>
Openpgp: preference=signencrypt
Autocrypt: addr=f.fainelli@gmail.com; prefer-encrypt=mutual; keydata=
 xsDiBEjPuBIRBACW9MxSJU9fvEOCTnRNqG/13rAGsj+vJqontvoDSNxRgmafP8d3nesnqPyR
 xGlkaOSDuu09rxuW+69Y2f1TzjFuGpBk4ysWOR85O2Nx8AJ6fYGCoeTbovrNlGT1M9obSFGQ
 X3IzRnWoqlfudjTO5TKoqkbOgpYqIo5n1QbEjCCwCwCg3DOH/4ug2AUUlcIT9/l3pGvoRJ0E
 AICDzi3l7pmC5IWn2n1mvP5247urtHFs/uusE827DDj3K8Upn2vYiOFMBhGsxAk6YKV6IP0d
 ZdWX6fqkJJlu9cSDvWtO1hXeHIfQIE/xcqvlRH783KrihLcsmnBqOiS6rJDO2x1eAgC8meAX
 SAgsrBhcgGl2Rl5gh/jkeA5ykwbxA/9u1eEuL70Qzt5APJmqVXR+kWvrqdBVPoUNy/tQ8mYc
 nzJJ63ng3tHhnwHXZOu8hL4nqwlYHRa9eeglXYhBqja4ZvIvCEqSmEukfivk+DlIgVoOAJbh
 qIWgvr3SIEuR6ayY3f5j0f2ejUMYlYYnKdiHXFlF9uXm1ELrb0YX4GMHz80nRmxvcmlhbiBG
 YWluZWxsaSA8Zi5mYWluZWxsaUBnbWFpbC5jb20+wmYEExECACYCGyMGCwkIBwMCBBUCCAME
 FgIDAQIeAQIXgAUCVF/S8QUJHlwd3wAKCRBhV5kVtWN2DvCVAJ4u4/bPF4P3jxb4qEY8I2gS
 6hG0gACffNWlqJ2T4wSSn+3o7CCZNd7SLSDOw00ESM+4EhAQAL/o09boR9D3Vk1Tt7+gpYr3
 WQ6hgYVON905q2ndEoA2J0dQxJNRw3snabHDDzQBAcqOvdi7YidfBVdKi0wxHhSuRBfuOppu
 pdXkb7zxuPQuSveCLqqZWRQ+Cc2QgF7SBqgznbe6Ngout5qXY5Dcagk9LqFNGhJQzUGHAsIs
 hap1f0B1PoUyUNeEInV98D8Xd/edM3mhO9nRpUXRK9Bvt4iEZUXGuVtZLT52nK6Wv2EZ1TiT
 OiqZlf1P+vxYLBx9eKmabPdm3yjalhY8yr1S1vL0gSA/C6W1o/TowdieF1rWN/MYHlkpyj9c
 Rpc281gAO0AP3V1G00YzBEdYyi0gaJbCEQnq8Vz1vDXFxHzyhgGz7umBsVKmYwZgA8DrrB0M
 oaP35wuGR3RJcaG30AnJpEDkBYHznI2apxdcuTPOHZyEilIRrBGzDwGtAhldzlBoBwE3Z3MY
 31TOpACu1ZpNOMysZ6xiE35pWkwc0KYm4hJA5GFfmWSN6DniimW3pmdDIiw4Ifcx8b3mFrRO
 BbDIW13E51j9RjbO/nAaK9ndZ5LRO1B/8Fwat7bLzmsCiEXOJY7NNpIEpkoNoEUfCcZwmLrU
 +eOTPzaF6drw6ayewEi5yzPg3TAT6FV3oBsNg3xlwU0gPK3v6gYPX5w9+ovPZ1/qqNfOrbsE
 FRuiSVsZQ5s3AAMFD/9XjlnnVDh9GX/r/6hjmr4U9tEsM+VQXaVXqZuHKaSmojOLUCP/YVQo
 7IiYaNssCS4FCPe4yrL4FJJfJAsbeyDykMN7wAnBcOkbZ9BPJPNCbqU6dowLOiy8AuTYQ48m
 vIyQ4Ijnb6GTrtxIUDQeOBNuQC/gyyx3nbL/lVlHbxr4tb6YkhkO6shjXhQh7nQb33FjGO4P
 WU11Nr9i/qoV8QCo12MQEo244RRA6VMud06y/E449rWZFSTwGqb0FS0seTcYNvxt8PB2izX+
 HZA8SL54j479ubxhfuoTu5nXdtFYFj5Lj5x34LKPx7MpgAmj0H7SDhpFWF2FzcC1bjiW9mjW
 HaKaX23Awt97AqQZXegbfkJwX2Y53ufq8Np3e1542lh3/mpiGSilCsaTahEGrHK+lIusl6mz
 Joil+u3k01ofvJMK0ZdzGUZ/aPMZ16LofjFA+MNxWrZFrkYmiGdv+LG45zSlZyIvzSiG2lKy
 kuVag+IijCIom78P9jRtB1q1Q5lwZp2TLAJlz92DmFwBg1hyFzwDADjZ2nrDxKUiybXIgZp9
 aU2d++ptEGCVJOfEW4qpWCCLPbOT7XBr+g/4H3qWbs3j/cDDq7LuVYIe+wchy/iXEJaQVeTC
 y5arMQorqTFWlEOgRA8OP47L9knl9i4xuR0euV6DChDrguup2aJVU8JPBBgRAgAPAhsMBQJU
 X9LxBQkeXB3fAAoJEGFXmRW1Y3YOj4UAn3nrFLPZekMeqX5aD/aq/dsbXSfyAKC45Go0YyxV
 HGuUuzv+GKZ6nsysJw==
Message-ID: <68519de5-9a47-9cb5-064c-dc4703aaa508@gmail.com>
Date:   Wed, 18 Apr 2018 15:31:17 -0700
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101
 Thunderbird/52.7.0
MIME-Version: 1.0
In-Reply-To: <20180409223153.41893-1-npcomplete13@gmail.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 04/09/2018 03:31 PM, Vivek Unune wrote:
> Currently, usb3 phy in bcm5301x.dtsi uses platform driver which
> requires register range "ccb-mii" <0x18003000 0x1000>. This range
> overlaps with mdio cmd and param registers (<0x18003000 0x8>).
> Essentially, the platform driver partly acts like a mdio bus
> driver, hence to use of this register range.
> 
> In some Northstar devices like Linksys EA9500, secondary switch
> is connected via external mdio. The only way to access and
> configure the external switch is via mdio bus. When we enable the
> mdio bus in it's current state, the mdio bus and any child buses
> fail to register because of the register range overlap.
> 
> On Northstar, the usb3 phy is connected at address 0x10 on the
> internal mdio bus. This change moves the usb3_phy node and makes
> it a child node of internal mdio bus.
> 
> Thanks to Rafał Miłecki's commit af850e14a7ae
> ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer") the
> same usb3 platform driver can now act as usb3 phy mdio driver.
> 
> Tested on Linksys Panamera (EA9500)
> 
> Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
> ---
> v2: Disabled usb3_phy by default, then enabled in dts where
>     necessary

Rafal, Hauke, this looks good to me, can you review? Thanks
-- 
Florian