Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Bhadram Varka <vbhadram@nvidia.com>
To:     Jisheng Zhang <Jisheng.Zhang@synaptics.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        "David S. Miller" <davem@davemloft.net>
CC:     "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Jingju Hou <Jingju.Hou@synaptics.com>
Subject: RE: [PATCH] net: phy: marvell: clear wol event before setting it
Thread-Topic: [PATCH] net: phy: marvell: clear wol event before setting it
Thread-Index: AQHT17Tmskie4f0tkky4KxMjyNmTQKQHwlIA
Date:   Thu, 19 Apr 2018 08:38:45 +0000
Message-ID: <96e77eac86794bef9a5b772147527c67@bgmail102.nvidia.com>
References: <20180419160232.519d15be@xhacker.debian>
In-Reply-To: <20180419160232.519d15be@xhacker.debian>
Accept-Language: en-US
MIME-Version: 1.0
Content-Language: en-US
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 8BIT
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

> -----Original Message-----
> From: netdev-owner@vger.kernel.org <netdev-owner@vger.kernel.org> On
> Behalf Of Jisheng Zhang
> Sent: Thursday, April 19, 2018 1:33 PM
> To: Andrew Lunn <andrew@lunn.ch>; Florian Fainelli <f.fainelli@gmail.com>;
> David S. Miller <davem@davemloft.net>
> Cc: netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Jingju Hou
> <Jingju.Hou@synaptics.com>
> Subject: [PATCH] net: phy: marvell: clear wol event before setting it
> 
> From: Jingju Hou <Jingju.Hou@synaptics.com>
> 
> If WOL event happened once, the LED[2] interrupt pin will not be cleared unless
> reading the CSISR register. So clear the WOL event before enabling it.
> 
> Signed-off-by: Jingju Hou <Jingju.Hou@synaptics.com>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> ---
>  drivers/net/phy/marvell.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index
> c22e8e383247..b6abe1cbc84b 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -115,6 +115,9 @@
>  /* WOL Event Interrupt Enable */
>  #define MII_88E1318S_PHY_CSIER_WOL_EIE			BIT(7)
> 
> +/* Copper Specific Interrupt Status Register */
> +#define MII_88E1318S_PHY_CSISR				0x13
> +

There is already macro to represent this register - MII_M1011_IEVENT. Do we need this macro ?

>  /* LED Timer Control Register */
>  #define MII_88E1318S_PHY_LED_TCR			0x12
>  #define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
> @@ -1393,6 +1396,12 @@ static int m88e1318_set_wol(struct phy_device
> *phydev,
>  		if (err < 0)
>  			goto error;
> 
> +		/* If WOL event happened once, the LED[2] interrupt pin
> +		 * will not be cleared unless reading the CSISR register.
> +		 * So clear the WOL event first before enabling it.
> +		 */
> +		phy_read(phydev, MII_88E1318S_PHY_CSISR);

This part of the operation already taken care by ack_interrupt and did_interrupt
[....]
.ack_interrupt = &marvell_ack_interrupt,
.did_interrupt = &m88e1121_did_interrupt,
[...]

If at all WOL event occurred marvell_ack_interrupt will take care of clearing the interrupt status register.
Am I missing anything here ?

>  		/* Enable the WOL interrupt */
>  		err = __phy_modify(phydev, MII_88E1318S_PHY_CSIER, 0,
>  				   MII_88E1318S_PHY_CSIER_WOL_EIE);
> --
> 2.17.0