Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 16 Mar 2001 14:09:20 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 16 Mar 2001 14:09:10 -0500 Received: from [216.184.166.130] ([216.184.166.130]:55160 "EHLO scsoftware.sc-software.com") by vger.kernel.org with ESMTP id ; Fri, 16 Mar 2001 14:09:04 -0500 Date: Fri, 16 Mar 2001 11:03:40 +0000 ( ) From: John Heil Reply-To: John Heil To: linux-kernel@vger.kernel.org Subject: IDE UDMA on a CMD-648 Chip Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I've acquired a UDMA66 capable IDE card with a CMD-648 chip, which is supposed to provide me with ide2 and ide3. ide2 is empty and ide3 has a writeable cdrom and an IDE zip drive on it. At boot up, the card's bios scan recognizes the cdrom and zip as master and slave on its secondary ide i/f, which is correct. However, it indicates that since it... 'Can't find a UDMA66 capable device' it is 'Disabling the UDMA66 bios'. I've done the usual append for ide3, in lilo.conf but w/o benefit. Kernel is currently 2.2.16, The mobo is an Asus A7V133 and the CPU is an 1.1 Athlon South bridge is a via 686b which runs fine at UDMA100 on a pair of Maxtors on IDE-0. I'll be upgrading this machine to 2.4.n-whatever in about 3 wks but... ...I'd like to get the 2 devices operational on this or some other 2.2.x, before that, if I can. I can't find the chip's datasheet. CMD only gives it to direct customers. I do have the datasheet for the CMD-646U, a prior UDMA supporting chip. I take this to be a bug in the on-card Bios. I am hoping to circumvent the bios. I assume it will involve some measure of IDE initialization which I don't mind coding if it does not exist yet. So has anyone encountered this chip yet and are there any existing solutions or suggestions. Thanx much The CMD-648 chip's vital statistics follow... root@scsoftware50:~# lspci -vvxxxs 00:0c.0 00:0c.0 RAID bus controller: CMD Technology Inc PCI0648 (rev 01) Subsystem: CMD Technology Inc PCI0648 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-