Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261586AbTHaTAO (ORCPT ); Sun, 31 Aug 2003 15:00:14 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261598AbTHaTAO (ORCPT ); Sun, 31 Aug 2003 15:00:14 -0400 Received: from mail.mediaways.net ([193.189.224.113]:54008 "HELO mail.mediaways.net") by vger.kernel.org with SMTP id S261586AbTHaTAK (ORCPT ); Sun, 31 Aug 2003 15:00:10 -0400 Subject: Re: Freeze with HPT370 2.4.22-rc2 and dxr3 From: Soeren Sonnenburg To: Marcelo Tosatti Cc: lkml , Alan Cox In-Reply-To: References: Content-Type: text/plain Message-Id: <1062356267.11436.218.camel@localhost> Mime-Version: 1.0 Date: Sun, 31 Aug 2003 20:57:48 +0200 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1210 Lines: 30 On Sat, 2003-08-30 at 22:25, Marcelo Tosatti wrote: > > When I play a movie through the dxr3 (driver form dxr3.sf.net) it used > > to work just fine for quite a long time. > > However now that I use a software raid (one via ide on asus a7v8x and 2 > > hpt370) I can reproducably get the system to freeze when I mplayer -vo > > dxr3 after less than 10 minutes. > > > Then the IDE lid is continuously on until I reset the machine. > > > I found out that when I copy the file to a ram disk and then play it > > through dxr3 it works just fine (no freeze). This happens even when I > > boot with init=/bin/sh (so no nvidia or other binary only modules). > > > Any ideas on what to try out ? > > Does the same happen with 2.4.20 or 2.4.21? (try with no binary modules > please) Yes, happens with 2.4.21 and no binary modules. Shall I also try out 2.4.20 ? I will if needed and it works with ide >137G / via chipset in udma mode. Regards, Soeren. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/