Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Maciej Purski <m.purski@samsung.com>
To:     linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
        dri-devel@lists.freedesktop.org
Cc:     David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Thierry Reding <thierry.reding@gmail.com>,
        Kukjin Kim <kgene@kernel.org>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Archit Taneja <architt@codeaurora.org>,
        Andrzej Hajda <a.hajda@samsung.com>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Inki Dae <inki.dae@samsung.com>,
        Joonyoung Shim <jy0922.shim@samsung.com>,
        Seung-Woo Kim <sw0312.kim@samsung.com>,
        Kyungmin Park <kyungmin.park@samsung.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Maciej Purski <m.purski@samsung.com>
Subject: [PATCH v2 10/10] ARM: dts: exynos5250-arndale: add DSI and panel
 nodes
Date:   Wed, 30 May 2018 14:16:01 +0200
Message-id: <1527682561-1386-11-git-send-email-m.purski@samsung.com>
In-reply-to: <1527682561-1386-1-git-send-email-m.purski@samsung.com>
CMS-TYPE: 201P
References: <1527682561-1386-1-git-send-email-m.purski@samsung.com>
        <CGME20180530121630eucas1p1584c59b67815a65d0747afab214979ef@eucas1p1.samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Andrzej Hajda <a.hajda@samsung.com>

The patch adds bridge and panel nodes.
It adds also DSI properties specific for arndale board and
regulators required by the bridge.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maciej Purski <m.purski@samsung.com>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 61 ++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7a8a5c5..816d89d 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -71,6 +71,17 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "boe,hv070wsa-100";
+		power-supply = <&vcc_3v3_reg>;
+		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+		port {
+			panel_ep: endpoint {
+				remote-endpoint = <&bridge_out_ep>;
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -97,6 +108,30 @@
 			reg = <2>;
 			regulator-name = "hdmi-en";
 		};
+
+		vcc_1v2_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "VCC_1V2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vcc_1v8_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "VCC_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vcc_3v3_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "VCC_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
 	};
 
 	fixed-rate-clocks {
@@ -119,6 +154,32 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	samsung,burst-clock-frequency = <320000000>;
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	bridge@0 {
+		reg = <0>;
+		compatible = "toshiba,tc358764";
+		vddc-supply = <&vcc_1v2_reg>;
+		vddio-supply = <&vcc_1v8_reg>;
+		vddlvds-supply = <&vcc_3v3_reg>;
+		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@1 {
+			reg = <1>;
+			bridge_out_ep: endpoint {
+				remote-endpoint = <&panel_ep>;
+			};
+		};
+	};
+};
+
 &dp {
 	status = "okay";
 	samsung,color-space = <0>;
-- 
2.7.4