Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Date:   Sun, 10 Jun 2018 13:09:24 +0200
From:   Stefan Agner <stefan@agner.ch>
To:     Dmitry Osipenko <digetx@gmail.com>
Cc:     boris.brezillon@bootlin.com, dwmw2@infradead.org,
        computersforpeace@gmail.com, marek.vasut@gmail.com,
        robh+dt@kernel.org, mark.rutland@arm.com, thierry.reding@gmail.com,
        dev@lynxeye.de, miquel.raynal@bootlin.com, richard@nod.at,
        marcel@ziswiler.com, krzk@kernel.org, benjamin.lindqvist@endian.se,
        jonathanh@nvidia.com, pdeschrijver@nvidia.com, pgaikwad@nvidia.com,
        mirza.krak@gmail.com, linux-mtd@lists.infradead.org,
        linux-tegra@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 4/6] mtd: rawnand: add NVIDIA Tegra NAND Flash
 controller driver
In-Reply-To: <22478634.OSqaXHucyu@dimapc>
References: <20180531221637.6017-1-stefan@agner.ch>
 <cdca329f-0b8d-0604-4cfb-b95baf84c867@gmail.com>
 <d625dd8ca816543e03668b74921563c1@agner.ch> <22478634.OSqaXHucyu@dimapc>
Message-ID: <5751ef697130ba93ce9fb7722a1ce117@agner.ch>
User-Agent: Roundcube Webmail/1.3.4
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 09.06.2018 14:21, Dmitry Osipenko wrote:
> On Saturday, 9 June 2018 00:51:01 MSK Stefan Agner wrote:
>> On 01.06.2018 11:20, Dmitry Osipenko wrote:
>> > On 01.06.2018 01:16, Stefan Agner wrote:
>> >> Add support for the NAND flash controller found on NVIDIA
>> >> Tegra 2 SoCs. This implementation does not make use of the
>> >> command queue feature. Regular operations/data transfers are
>> >> done in PIO mode. Page read/writes with hardware ECC make
>> >> use of the DMA for data transfer.
>> >>
>> >> Signed-off-by: Lucas Stach <dev@lynxeye.de>
>> >> Signed-off-by: Stefan Agner <stefan@agner.ch>
>> >> ---
>> >>
>> >>  MAINTAINERS                       |    7 +
>> >>  drivers/mtd/nand/raw/Kconfig      |    6 +
>> >>  drivers/mtd/nand/raw/Makefile     |    1 +
>> >>  drivers/mtd/nand/raw/tegra_nand.c | 1143 +++++++++++++++++++++++++++++
>> >>  4 files changed, 1157 insertions(+)
>> >>  create mode 100644 drivers/mtd/nand/raw/tegra_nand.c
>> >>
>> >> diff --git a/MAINTAINERS b/MAINTAINERS
>> >> index 58b9861ccf99..c2e5571c85d4 100644
>> >> --- a/MAINTAINERS
>> >> +++ b/MAINTAINERS
>> >> @@ -13844,6 +13844,13 @@ M:	Laxman Dewangan <ldewangan@nvidia.com>
>> >>
>> >>  S:	Supported
>> >>  F:	drivers/input/keyboard/tegra-kbc.c
>> >>
>> >> +TEGRA NAND DRIVER
>> >> +M:	Stefan Agner <stefan@agner.ch>
>> >> +M:	Lucas Stach <dev@lynxeye.de>
>> >> +S:	Maintained
>> >> +F:	Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
>> >> +F:	drivers/mtd/nand/raw/tegra_nand.c
>> >> +
>> >>
>> >>  TEGRA PWM DRIVER
>> >>  M:	Thierry Reding <thierry.reding@gmail.com>
>> >>  S:	Supported
>> >>
>> >> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
>> >> index 19a2b283fbbe..e9093f52371e 100644
>> >> --- a/drivers/mtd/nand/raw/Kconfig
>> >> +++ b/drivers/mtd/nand/raw/Kconfig
>> >> @@ -534,4 +534,10 @@ config MTD_NAND_MTK
>> >>
>> >>  	  Enables support for NAND controller on MTK SoCs.
>> >>  	  This controller is found on mt27xx, mt81xx, mt65xx SoCs.
>> >>
>> >> +config MTD_NAND_TEGRA
>> >> +	tristate "Support for NAND controller on NVIDIA Tegra"
>> >> +	depends on ARCH_TEGRA || COMPILE_TEST
>> >> +	help
>> >> +	  Enables support for NAND flash controller on NVIDIA Tegra SoC.
>> >> +
>> >>
>> >>  endif # MTD_NAND
>> >>
>> >> diff --git a/drivers/mtd/nand/raw/Makefile
>> >> b/drivers/mtd/nand/raw/Makefile
>> >> index 165b7ef9e9a1..d5a5f9832b88 100644
>> >> --- a/drivers/mtd/nand/raw/Makefile
>> >> +++ b/drivers/mtd/nand/raw/Makefile
>> >> @@ -56,6 +56,7 @@ obj-$(CONFIG_MTD_NAND_HISI504)	        +=
>> >> hisi504_nand.o
>> >>
>> >>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
>> >>  obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
>> >>  obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
>> >>
>> >> +obj-$(CONFIG_MTD_NAND_TEGRA)		+= tegra_nand.o
>> >>
>> >>  nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
>> >>  nand-objs += nand_amd.o
>> >>
>> >> diff --git a/drivers/mtd/nand/raw/tegra_nand.c
>> >> b/drivers/mtd/nand/raw/tegra_nand.c new file mode 100644
>> >> index 000000000000..e9664f2938a3
>> >> --- /dev/null
>> >> +++ b/drivers/mtd/nand/raw/tegra_nand.c
>> >> @@ -0,0 +1,1143 @@
>> >> +// SPDX-License-Identifier: GPL-2.0
>> >> +/*
>> >> + * Copyright (C) 2018 Stefan Agner <stefan@agner.ch>
>> >> + * Copyright (C) 2014-2015 Lucas Stach <dev@lynxeye.de>
>> >> + * Copyright (C) 2012 Avionic Design GmbH
>> >> + */
>> >> +
>> >> +#include <linux/clk.h>
>> >> +#include <linux/completion.h>
>> >> +#include <linux/delay.h>
>> >> +#include <linux/dma-mapping.h>
>> >> +#include <linux/err.h>
>> >> +#include <linux/gpio/consumer.h>
>> >> +#include <linux/interrupt.h>
>> >> +#include <linux/io.h>
>> >> +#include <linux/module.h>
>> >> +#include <linux/mtd/partitions.h>
>> >> +#include <linux/mtd/rawnand.h>
>> >> +#include <linux/of.h>
>> >> +#include <linux/platform_device.h>
>> >> +#include <linux/reset.h>
>> >> +
>> >> +#define CMD					0x00
>> >> +#define   CMD_GO				BIT(31)
>> >> +#define   CMD_CLE				BIT(30)
>> >> +#define   CMD_ALE				BIT(29)
>> >> +#define   CMD_PIO				BIT(28)
>> >> +#define   CMD_TX				BIT(27)
>> >> +#define   CMD_RX				BIT(26)
>> >> +#define   CMD_SEC_CMD				BIT(25)
>> >> +#define   CMD_AFT_DAT				BIT(24)
>> >> +#define   CMD_TRANS_SIZE(x)			(((x - 1) & 0xf) << 20)
>> >> +#define   CMD_A_VALID				BIT(19)
>> >> +#define   CMD_B_VALID				BIT(18)
>> >> +#define   CMD_RD_STATUS_CHK			BIT(17)
>> >> +#define   CMD_RBSY_CHK				BIT(16)
>> >> +#define   CMD_CE(x)				BIT((8 + ((x) & 0x7)))
>> >> +#define   CMD_CLE_SIZE(x)			(((x - 1) & 0x3) << 4)
>> >> +#define   CMD_ALE_SIZE(x)			(((x - 1) & 0xf) << 0)
>> >> +
>> >> +#define STATUS					0x04
>> >> +
>> >> +#define ISR					0x08
>> >> +#define   ISR_CORRFAIL_ERR			BIT(24)
>> >> +#define   ISR_UND				BIT(7)
>> >> +#define   ISR_OVR				BIT(6)
>> >> +#define   ISR_CMD_DONE				BIT(5)
>> >> +#define   ISR_ECC_ERR				BIT(4)
>> >> +
>> >> +#define IER					0x0c
>> >> +#define   IER_ERR_TRIG_VAL(x)			(((x) & 0xf) << 16)
>> >> +#define   IER_UND				BIT(7)
>> >> +#define   IER_OVR				BIT(6)
>> >> +#define   IER_CMD_DONE				BIT(5)
>> >> +#define   IER_ECC_ERR				BIT(4)
>> >> +#define   IER_GIE				BIT(0)
>> >> +
>> >> +#define CFG					0x10
>> >> +#define   CFG_HW_ECC				BIT(31)
>> >> +#define   CFG_ECC_SEL				BIT(30)
>> >> +#define   CFG_ERR_COR				BIT(29)
>> >> +#define   CFG_PIPE_EN				BIT(28)
>> >> +#define   CFG_TVAL_4				(0 << 24)
>> >> +#define   CFG_TVAL_6				(1 << 24)
>> >> +#define   CFG_TVAL_8				(2 << 24)
>> >> +#define   CFG_SKIP_SPARE			BIT(23)
>> >> +#define   CFG_BUS_WIDTH_16			BIT(21)
>> >> +#define   CFG_COM_BSY				BIT(20)
>> >> +#define   CFG_PS_256				(0 << 16)
>> >> +#define   CFG_PS_512				(1 << 16)
>> >> +#define   CFG_PS_1024				(2 << 16)
>> >> +#define   CFG_PS_2048				(3 << 16)
>> >> +#define   CFG_PS_4096				(4 << 16)
>> >> +#define   CFG_SKIP_SPARE_SIZE_4			(0 << 14)
>> >> +#define   CFG_SKIP_SPARE_SIZE_8			(1 << 14)
>> >> +#define   CFG_SKIP_SPARE_SIZE_12		(2 << 14)
>> >> +#define   CFG_SKIP_SPARE_SIZE_16		(3 << 14)
>> >> +#define   CFG_TAG_BYTE_SIZE(x)			((x) & 0xff)
>> >> +
>> >> +#define TIMING_1				0x14
>> >> +#define   TIMING_TRP_RESP(x)			(((x) & 0xf) << 28)
>> >> +#define   TIMING_TWB(x)				(((x) & 0xf) << 24)
>> >> +#define   TIMING_TCR_TAR_TRR(x)			(((x) & 0xf) << 20)
>> >> +#define   TIMING_TWHR(x)			(((x) & 0xf) << 16)
>> >> +#define   TIMING_TCS(x)				(((x) & 0x3) << 14)
>> >> +#define   TIMING_TWH(x)				(((x) & 0x3) << 12)
>> >> +#define   TIMING_TWP(x)				(((x) & 0xf) <<  8)
>> >> +#define   TIMING_TRH(x)				(((x) & 0x3) <<  4)
>> >> +#define   TIMING_TRP(x)				(((x) & 0xf) <<  0)
>> >> +
>> >> +#define RESP					0x18
>> >> +
>> >> +#define TIMING_2				0x1c
>> >> +#define   TIMING_TADL(x)			((x) & 0xf)
>> >> +
>> >> +#define CMD_1					0x20
>> >> +#define CMD_2					0x24
>> >> +#define ADDR_1					0x28
>> >> +#define ADDR_2					0x2c
>> >> +
>> >> +#define DMA_CTRL				0x30
>> >> +#define   DMA_CTRL_GO				BIT(31)
>> >> +#define   DMA_CTRL_IN				(0 << 30)
>> >> +#define   DMA_CTRL_OUT				BIT(30)
>> >> +#define   DMA_CTRL_PERF_EN			BIT(29)
>> >> +#define   DMA_CTRL_IE_DONE			BIT(28)
>> >> +#define   DMA_CTRL_REUSE			BIT(27)
>> >> +#define   DMA_CTRL_BURST_1			(2 << 24)
>> >> +#define   DMA_CTRL_BURST_4			(3 << 24)
>> >> +#define   DMA_CTRL_BURST_8			(4 << 24)
>> >> +#define   DMA_CTRL_BURST_16			(5 << 24)
>> >> +#define   DMA_CTRL_IS_DONE			BIT(20)
>> >> +#define   DMA_CTRL_EN_A				BIT(2)
>> >> +#define   DMA_CTRL_EN_B				BIT(1)
>> >> +
>> >> +#define DMA_CFG_A				0x34
>> >> +#define DMA_CFG_B				0x38
>> >> +
>> >> +#define FIFO_CTRL				0x3c
>> >> +#define   FIFO_CTRL_CLR_ALL			BIT(3)
>> >> +
>> >> +#define DATA_PTR				0x40
>> >> +#define TAG_PTR					0x44
>> >> +#define ECC_PTR					0x48
>> >> +
>> >> +#define DEC_STATUS				0x4c
>> >> +#define   DEC_STATUS_A_ECC_FAIL			BIT(1)
>> >> +#define   DEC_STATUS_ERR_COUNT_MASK		0x00ff0000
>> >> +#define   DEC_STATUS_ERR_COUNT_SHIFT		16
>> >> +
>> >> +#define HWSTATUS_CMD				0x50
>> >> +#define HWSTATUS_MASK				0x54
>> >> +#define   HWSTATUS_RDSTATUS_MASK(x)		(((x) & 0xff) << 24)
>> >> +#define   HWSTATUS_RDSTATUS_VALUE(x)		(((x) & 0xff) << 16)
>> >> +#define   HWSTATUS_RBSY_MASK(x)			(((x) & 0xff) << 8)
>> >> +#define   HWSTATUS_RBSY_VALUE(x)		(((x) & 0xff) << 0)
>> >> +
>> >> +#define BCH_CONFIG				0xcc
>> >> +#define   BCH_ENABLE				BIT(0)
>> >> +#define   BCH_TVAL_4				(0 << 4)
>> >> +#define   BCH_TVAL_8				(1 << 4)
>> >> +#define   BCH_TVAL_14				(2 << 4)
>> >> +#define   BCH_TVAL_16				(3 << 4)
>> >> +
>> >> +#define DEC_STAT_RESULT				0xd0
>> >> +#define DEC_STAT_BUF				0xd4
>> >> +#define   DEC_STAT_BUF_FAIL_SEC_FLAG_MASK	0xff000000
>> >> +#define   DEC_STAT_BUF_FAIL_SEC_FLAG_SHIFT	24
>> >> +#define   DEC_STAT_BUF_CORR_SEC_FLAG_MASK	0x00ff0000
>> >> +#define   DEC_STAT_BUF_CORR_SEC_FLAG_SHIFT	16
>> >> +#define   DEC_STAT_BUF_MAX_CORR_CNT_MASK	0x00001f00
>> >> +#define   DEC_STAT_BUF_MAX_CORR_CNT_SHIFT	8
>> >> +
>> >> +#define OFFSET(val, off)		((val) < (off) ? 0 : (val) - (off))
>> >> +
>> >> +#define SKIP_SPARE_BYTES	4
>> >> +#define BITS_PER_STEP_RS	18
>> >> +#define BITS_PER_STEP_BCH	13
>> >> +
>> >> +struct tegra_nand_controller {
>> >> +	struct nand_hw_control controller;
>> >> +	void __iomem *regs;
>> >> +	struct clk *clk;
>> >> +	struct device *dev;
>> >> +	struct completion command_complete;
>> >> +	struct completion dma_complete;
>> >> +	bool last_read_error;
>> >> +	int cur_chip;
>> >> +	struct nand_chip *chip;
>> >> +};
>> >> +
>> >> +struct tegra_nand_chip {
>> >> +	struct nand_chip chip;
>> >> +	struct gpio_desc *wp_gpio;
>> >> +	struct mtd_oob_region tag;
>> >> +};
>> >> +
>> >> +static inline struct tegra_nand_controller *to_tegra_ctrl(
>> >> +						struct nand_hw_control *hw_ctrl)
>> >> +{
>> >> +	return container_of(hw_ctrl, struct tegra_nand_controller,
> controller);
>> >> +}
>> >> +
>> >> +static inline struct tegra_nand_chip *to_tegra_chip(struct nand_chip
>> >> *chip) +{
>> >> +	return container_of(chip, struct tegra_nand_chip, chip);
>> >> +}
>> >> +
>> >> +static int tegra_nand_ooblayout_rs_ecc(struct mtd_info *mtd, int
>> >> section,
>> >> +				       struct mtd_oob_region *oobregion)
>> >> +{
>> >> +	struct nand_chip *chip = mtd_to_nand(mtd);
>> >> +	int bytes_per_step = DIV_ROUND_UP(BITS_PER_STEP_RS *
>> >> chip->ecc.strength,
>> >> +					  BITS_PER_BYTE);
>> >> +
>> >> +	if (section > 0)
>> >> +		return -ERANGE;
>> >> +
>> >> +	oobregion->offset = SKIP_SPARE_BYTES;
>> >> +	oobregion->length = round_up(bytes_per_step * chip->ecc.steps, 4);
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static int tegra_nand_ooblayout_rs_free(struct mtd_info *mtd, int
>> >> section,
>> >> +					struct mtd_oob_region *oobregion)
>> >> +{
>> >> +	struct nand_chip *chip = mtd_to_nand(mtd);
>> >> +	int bytes_per_step = DIV_ROUND_UP(BITS_PER_STEP_RS *
>> >> chip->ecc.strength,
>> >> +					  BITS_PER_BYTE);
>> >> +
>> >> +	if (section > 0)
>> >> +		return -ERANGE;
>> >> +
>> >> +	oobregion->offset = SKIP_SPARE_BYTES +
>> >> +			    round_up(bytes_per_step * chip->ecc.steps, 4);
>> >> +	oobregion->length = mtd->oobsize - oobregion->offset;
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static const struct mtd_ooblayout_ops tegra_nand_oob_rs_ops = {
>> >> +	.ecc = tegra_nand_ooblayout_rs_ecc,
>> >> +	.free = tegra_nand_ooblayout_rs_free,
>> >> +};
>> >> +
>> >> +static int tegra_nand_ooblayout_bch_ecc(struct mtd_info *mtd, int
>> >> section,
>> >> +				       struct mtd_oob_region *oobregion)
>> >> +{
>> >> +	struct nand_chip *chip = mtd_to_nand(mtd);
>> >> +	int bytes_per_step = DIV_ROUND_UP(BITS_PER_STEP_BCH *
>> >> chip->ecc.strength,
>> >> +					  BITS_PER_BYTE);
>> >> +
>> >> +	if (section > 0)
>> >> +		return -ERANGE;
>> >> +
>> >> +	oobregion->offset = SKIP_SPARE_BYTES;
>> >> +	oobregion->length = round_up(bytes_per_step * chip->ecc.steps, 4);
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static int tegra_nand_ooblayout_bch_free(struct mtd_info *mtd, int
>> >> section, +					struct mtd_oob_region *oobregion)
>> >> +{
>> >> +	struct nand_chip *chip = mtd_to_nand(mtd);
>> >> +	int bytes_per_step = DIV_ROUND_UP(BITS_PER_STEP_BCH *
>> >> chip->ecc.strength,
>> >> +					  BITS_PER_BYTE);
>> >> +
>> >> +	if (section > 0)
>> >> +		return -ERANGE;
>> >> +
>> >> +	oobregion->offset = SKIP_SPARE_BYTES +
>> >> +			    round_up(bytes_per_step * chip->ecc.steps, 4);
>> >> +	oobregion->length = mtd->oobsize - oobregion->offset;
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +/*
>> >> + * Layout with tag bytes is
>> >> + *
>> >> + *
>> >> ------------------------------------------------------------------------
>> >> -- + * | main area                       | skip bytes | tag bytes |
>> >> parity | .. | + *
>> >> ------------------------------------------------------------------------
>> >> -- + *
>> >> + * If not tag bytes are written, parity moves right after skip bytes!
>> >> + */
>> >> +static const struct mtd_ooblayout_ops tegra_nand_oob_bch_ops = {
>> >> +	.ecc = tegra_nand_ooblayout_bch_ecc,
>> >> +	.free = tegra_nand_ooblayout_bch_free,
>> >> +};
>> >> +
>> >> +static irqreturn_t tegra_nand_irq(int irq, void *data)
>> >> +{
>> >> +	struct tegra_nand_controller *ctrl = data;
>> >> +	u32 isr, dma;
>> >> +
>> >> +	isr = readl_relaxed(ctrl->regs + ISR);
>> >> +	dma = readl_relaxed(ctrl->regs + DMA_CTRL);
>> >> +	dev_dbg(ctrl->dev, "isr %08x\n", isr);
>> >> +
>> >> +	if (!isr && !(dma & DMA_CTRL_IS_DONE))
>> >> +		return IRQ_NONE;
>> >> +
>> >> +	/*
>> >> +	 * The bit name is somewhat missleading: This is also set when
>> >> +	 * HW ECC was successful. The data sheet states:
>> >> +	 * Correctable OR Un-correctable errors occurred in the DMA
> transfer...
>> >> +	 */
>> >> +	if (isr & ISR_CORRFAIL_ERR)
>> >> +		ctrl->last_read_error = true;
>> >> +
>> >> +	if (isr & ISR_CMD_DONE)
>> >> +		complete(&ctrl->command_complete);
>> >> +
>> >> +	if (isr & ISR_UND)
>> >> +		dev_err(ctrl->dev, "FIFO underrun\n");
>> >> +
>> >> +	if (isr & ISR_OVR)
>> >> +		dev_err(ctrl->dev, "FIFO overrun\n");
>> >> +
>> >> +	/* handle DMA interrupts */
>> >> +	if (dma & DMA_CTRL_IS_DONE) {
>> >> +		writel_relaxed(dma, ctrl->regs + DMA_CTRL);
>> >> +		complete(&ctrl->dma_complete);
>> >> +	}
>> >> +
>> >> +	/* clear interrupts */
>> >> +	writel_relaxed(isr, ctrl->regs + ISR);
>> >> +
>> >> +	return IRQ_HANDLED;
>> >> +}
>> >> +
>> >> +static const char * const tegra_nand_reg_names[] = {
>> >> +	"COMMAND",
>> >> +	"STATUS",
>> >> +	"ISR",
>> >> +	"IER",
>> >> +	"CONFIG",
>> >> +	"TIMING",
>> >> +	NULL,
>> >> +	"TIMING2",
>> >> +	"CMD_REG1",
>> >> +	"CMD_REG2",
>> >> +	"ADDR_REG1",
>> >> +	"ADDR_REG2",
>> >> +	"DMA_MST_CTRL",
>> >> +	"DMA_CFG_A",
>> >> +	"DMA_CFG_B",
>> >> +	"FIFO_CTRL",
>> >> +};
>> >> +
>> >> +static void tegra_nand_dump_reg(struct tegra_nand_controller *ctrl)
>> >> +{
>> >> +	u32 reg;
>> >> +	int i;
>> >> +
>> >> +	dev_err(ctrl->dev, "Tegra NAND controller register dump\n");
>> >> +	for (i = 0; i < ARRAY_SIZE(tegra_nand_reg_names); i++) {
>> >> +		const char *reg_name = tegra_nand_reg_names[i];
>> >> +
>> >> +		if (!reg_name)
>> >> +			continue;
>> >> +
>> >> +		reg = readl_relaxed(ctrl->regs + (i * 4));
>> >> +		dev_err(ctrl->dev, "%s: 0x%08x\n", reg_name, reg);
>> >> +	}
>> >> +}
>> >> +
>> >> +static int tegra_nand_cmd(struct nand_chip *chip,
>> >> +			 const struct nand_subop *subop)
>> >> +{
>> >> +	const struct nand_op_instr *instr;
>> >> +	const struct nand_op_instr *instr_data_in = NULL;
>> >> +	struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
>> >> +	unsigned int op_id, size = 0, offset = 0;
>> >> +	bool first_cmd = true;
>> >> +	u32 reg, cmd = 0;
>> >> +	int ret;
>> >> +
>> >> +	for (op_id = 0; op_id < subop->ninstrs; op_id++) {
>> >> +		unsigned int naddrs, i;
>> >> +		const u8 *addrs;
>> >> +		u32 addr1 = 0, addr2 = 0;
>> >> +
>> >> +		instr = &subop->instrs[op_id];
>> >> +
>> >> +		switch (instr->type) {
>> >> +		case NAND_OP_CMD_INSTR:
>> >> +			if (first_cmd) {
>> >> +				cmd |= CMD_CLE;
>> >> +				writel_relaxed(instr->ctx.cmd.opcode,
>> >> +					       ctrl->regs + CMD_1);
>> >> +			} else {
>> >> +				cmd |= CMD_SEC_CMD;
>> >> +				writel_relaxed(instr->ctx.cmd.opcode,
>> >> +					       ctrl->regs + CMD_2);
>> >> +			}
>> >> +			first_cmd = false;
>> >> +			break;
>> >> +		case NAND_OP_ADDR_INSTR:
>> >> +			offset = nand_subop_get_addr_start_off(subop, op_id);
>> >> +			naddrs = nand_subop_get_num_addr_cyc(subop, op_id);
>> >> +			addrs = &instr->ctx.addr.addrs[offset];
>> >> +
>> >> +			cmd |= CMD_ALE | CMD_ALE_SIZE(naddrs);
>> >> +			for (i = 0; i < min_t(unsigned int, 4, naddrs); i++)
>> >> +				addr1 |= *addrs++ << (BITS_PER_BYTE * i);
>> >> +			naddrs -= i;
>> >> +			for (i = 0; i < min_t(unsigned int, 4, naddrs); i++)
>> >> +				addr2 |= *addrs++ << (BITS_PER_BYTE * i);
>> >> +			writel_relaxed(addr1, ctrl->regs + ADDR_1);
>> >> +			writel_relaxed(addr2, ctrl->regs + ADDR_2);
>> >> +			break;
>> >> +
>> >> +		case NAND_OP_DATA_IN_INSTR:
>> >> +			size = nand_subop_get_data_len(subop, op_id);
>> >> +			offset = nand_subop_get_data_start_off(subop, op_id);
>> >> +
>> >> +			cmd |= CMD_TRANS_SIZE(size) | CMD_PIO | CMD_RX |
>> >> +				CMD_A_VALID;
>> >> +
>> >> +			instr_data_in = instr;
>> >> +			break;
>> >> +
>> >> +		case NAND_OP_DATA_OUT_INSTR:
>> >> +			size = nand_subop_get_data_len(subop, op_id);
>> >> +			offset = nand_subop_get_data_start_off(subop, op_id);
>> >> +
>> >> +			cmd |= CMD_TRANS_SIZE(size) | CMD_PIO | CMD_TX |
>> >> +				CMD_A_VALID;
>> >> +
>> >> +			memcpy(&reg, instr->ctx.data.buf.out + offset, size);
>> >> +			writel_relaxed(reg, ctrl->regs + RESP);
>> >> +
>> >> +			break;
>> >> +		case NAND_OP_WAITRDY_INSTR:
>> >> +			cmd |= CMD_RBSY_CHK;
>> >> +			break;
>> >> +
>> >> +		}
>> >> +	}
>> >> +
>> >> +	cmd |= CMD_GO | CMD_CE(ctrl->cur_chip);
>> >> +	writel_relaxed(cmd, ctrl->regs + CMD);
>> >> +	ret = wait_for_completion_timeout(&ctrl->command_complete,
>> >> +					  msecs_to_jiffies(500));
>> >> +	if (!ret) {
>> >> +		dev_err(ctrl->dev, "CMD timeout\n");
>> >> +		tegra_nand_dump_reg(ctrl);
>> >> +		return -ETIMEDOUT;
>> >> +	}
>> >
>> > - wait_for_completion_timeout() could fail
>>
>> Not according to:
>> https://elixir.bootlin.com/linux/latest/source/kernel/sched/completion.c#L14
>> 0 https://www.kernel.org/doc/Documentation/scheduler/completion.txt
>>
>> Afaik, only the _interruptible variant can fail.
> 
> Okay.
> 
>> Btw, maybe we should use the _io variant?
> 
> Looks like the _io variant is something specific to block/FS subsys and 
> shouldn't be used by the drivers.
> 
>> > - HW shall be reset
>> > - completion shall be re-inited because IRQ could fire just after the
>> > completion timeout
>> >
>> > I'd write it something like this:
>> >
>> > #define INT_MASK	(IER_UND | IER_OVR | IER_CMD_DONE | IER_GIE)
>> >
>> > #define HWSTATUS_MASK	(HWSTATUS_RDSTATUS_MASK(1) |		 \
>> >
>> > 			 HWSTATUS_RDSTATUS_VALUE(0) |		 \
>> > 			 HWSTATUS_RBSY_MASK(NAND_STATUS_READY) | \
>> > 			 HWSTATUS_RBSY_VALUE(NAND_STATUS_READY))
>> >
>> > #define HW_TIMEOUT	500
>> >
>> > void tegra_nand_controller_reset(struct tegra_nand_controller *ctrl)
>> > {
>> >
>> > 	int err;
>> >
>> > 	disable_irq(ctrl->irq);
>> >
>> > 	err = reset_control_reset(ctrl->rst);
>> > 	if (err) {
>> >
>> > 		dev_err(ctrl->dev, "Failed to reset HW: %d\n", err);
>> > 		msleep(HW_TIMEOUT);
>> >
>> > 	}
>> >
>> > 	writel_relaxed(NAND_CMD_STATUS, ctrl->regs + HWSTATUS_CMD);
>> > 	writel_relaxed(HWSTATUS_MASK, ctrl->regs + HWSTATUS_MASK);
>> > 	writel_relaxed(INT_MASK, ctrl->regs + ISR);
>>
>> If we do a controller reset, there is much more state than that which
>> needs to be restored. A lot of it is not readily available currently
>> (timing, ECC settings...)
>>
>> That seems a lot of work for a code path I do not intend to ever use :-)
> 
> Are you sure that resetting HW resets the timing and other registers 
> configuration? Reset implementation is HW-specific, like for example in a case 
> of a video decoder the registers state is re-intialized on HW reset, but 
> registers configuration is untouched in a case of resetting GPU. I'd suggest 
> to check whether NAND controller resetting affects the HW configuration.

It seems all registers are set back to their documented reset value:

[boot loader/ROM initialized values]
[    1.270253] tegra-nand 70008000.nand: Tegra NAND controller register
dump
[    1.277051] tegra-nand 70008000.nand: COMMAND: 0x66880104
[    1.282457] tegra-nand 70008000.nand: STATUS: 0x00000101
[    1.287763] tegra-nand 70008000.nand: ISR: 0x01000120
[    1.292818] tegra-nand 70008000.nand: IER: 0x00000000
[    1.297863] tegra-nand 70008000.nand: CONFIG: 0x00840000
[    1.303181] tegra-nand 70008000.nand: TIMING: 0x05040000
[    1.308486] tegra-nand 70008000.nand: TIMING2: 0x00000003
[    1.313897] tegra-nand 70008000.nand: CMD_REG1: 0x00000000
[    1.319377] tegra-nand 70008000.nand: CMD_REG2: 0x00000030
[    1.324868] tegra-nand 70008000.nand: ADDR_REG1: 0x03000000
[    1.330435] tegra-nand 70008000.nand: ADDR_REG2: 0x00000000
[    1.336011] tegra-nand 70008000.nand: DMA_MST_CTRL: 0x04100004
[    1.341838] tegra-nand 70008000.nand: DMA_CFG_A: 0x00000fff
[    1.347415] tegra-nand 70008000.nand: DMA_CFG_B: 0x0000001b
[    1.352991] tegra-nand 70008000.nand: FIFO_CTRL: 0x0000aa00
[reset]
[    1.358559] tegra-nand 70008000.nand: Tegra NAND controller register
dump
[    1.365352] tegra-nand 70008000.nand: COMMAND: 0x00800004
[    1.370744] tegra-nand 70008000.nand: STATUS: 0x00000101
[    1.376060] tegra-nand 70008000.nand: ISR: 0x00000100
[    1.381105] tegra-nand 70008000.nand: IER: 0x00000000
[    1.386161] tegra-nand 70008000.nand: CONFIG: 0x10030000
[    1.391466] tegra-nand 70008000.nand: TIMING: 0x00000000
[    1.396782] tegra-nand 70008000.nand: TIMING2: 0x00000000
[    1.402174] tegra-nand 70008000.nand: CMD_REG1: 0x00000000
[    1.407664] tegra-nand 70008000.nand: CMD_REG2: 0x00000000
[    1.413156] tegra-nand 70008000.nand: ADDR_REG1: 0x00000000
[    1.418722] tegra-nand 70008000.nand: ADDR_REG2: 0x00000000
[    1.424297] tegra-nand 70008000.nand: DMA_MST_CTRL: 0x24000000
[    1.430123] tegra-nand 70008000.nand: DMA_CFG_A: 0x00000000
[    1.435698] tegra-nand 70008000.nand: DMA_CFG_B: 0x00000000
[    1.441264] tegra-nand 70008000.nand: FIFO_CTRL: 0x0000aa00

--
Stefan