Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263627AbTIHUF7 (ORCPT ); Mon, 8 Sep 2003 16:05:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263633AbTIHUF7 (ORCPT ); Mon, 8 Sep 2003 16:05:59 -0400 Received: from nat9.steeleye.com ([65.114.3.137]:26885 "EHLO fenric.sc.steeleye.com") by vger.kernel.org with ESMTP id S263627AbTIHUFz (ORCPT ); Mon, 8 Sep 2003 16:05:55 -0400 Message-ID: <3F5CE0E5.A5A08A91@SteelEye.com> Date: Mon, 08 Sep 2003 16:04:53 -0400 From: Paul Clements X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.13 i686) X-Accept-Language: en MIME-Version: 1.0 To: Pavel Machek CC: Sven =?iso-8859-1?Q?K=F6hler?= , linux-kernel@vger.kernel.org Subject: Re: [NBD] patch and documentation References: <3F5CB554.5040507@upb.de> <20030908193838.GA435@elf.ucw.cz> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5898 Lines: 125 Pavel Machek wrote: > Paul, do you think this docs could be added to the end of > Documentation/nbd.txt? I've made some changes to 2.6 nbd.txt, so let me look at integrating this into those changes and also putting them into 2.4. > The patch also looks harmless enough for applying ;-). Harmless enough, although I'm not sure it really makes that much difference. The max_sectors being set to 255 doesn't, by itself, explain the back and forth 127k, 1k request thing. Typically what you'll see is 127k, 127k, 127k, etc. and then some odd sized request at the end. Or the device gets unplugged anyway at some point and there are odd sized requests scattered throughout...that's especially going to be true if the reads or writes are from an actual disk, rather than /dev/null. I may be just coincidence that setting max_sectors to 256 actually helps. Also, are we sure that all those requests you're seeing are of the same type (all reads, all writes)? -- Paul > > The patch i attached defines max_sectors for each NBD device to be 256 > > which is 128KB as described in the protocol description i attached. > > The value 255 which is default in 2.4 kernels is not optimal. See my > > other posting in the lkml to read why. > > The patch seems to work fine. My server-implementation receives one > > 128KB request as expected instead of two 127KB and 1Kb requests. > > > > Even if 256 is the new max_sectors-default of kernel 2.6, the patch > > should be applied since the value should be part of the protocol > > specification and therefor part of nbd.c > > > > The documentation i attached should be published somewhere. For example > > on nbd.sf.net since we didn't find one source where all the information > > is collected. > > > > Thx > > Sven > > > The NBD-protocol > > > > How it works: > > To use the NBD features of the kernel you must compile the kernel module > > called "Network block device support" (CONFIG_BLK_DEV_NBD). After you've > > loaded the module the devices will appear in /dev/nbd/ if you're using > > devfs. If you're not using devfs you will possibly need to create your > > device-nodes with "mknod". All NBD devices have major ID 43. /dev/nbd/0 > > has minor ID 0, /dev/nbd/1 has minor ID 1 and so on. > > To connect a NBD device to a remote server you need install the NBD tools > > downloadable at http://nbd.sf.net or http://sf.net/projects/nbd. Run > > "nbd-client /dev/nbd/0" to connect the device /dev/nbd/0 > > to the remote server. nbd-client will open a TCP-connection to the server > > and waits for some initial data which contains the size of the device. > > Than the handle of the TCP-connection is transferred to the kernel for > > further use. nbd-client will fork into background because the handle of the > > TCP-connection would be closed by the kernel if nbd-client exits. > > The tools also contain a very basic NBD server which will enable you to use > > any file or device as a NBD. > > > > The protocol: > > The protocol is based on top of TCP/IP. Both client and server send packets > > to each other. The server must send an init-packet to the client if a > > client connects. After that the server just receives request-packets from > > the client and sends back reply-packets until the connection is closed or a > > disconnect-request is received. > > > > The amount of data that can be read or written with one request > > is limited to 128KB. > > > > The current implementation of the NBD-protocol in the Linux-Kernel does > > send multiple requests without waiting for replies. So it does make sense > > for the server to handle requests in parallel. > > > > Constants: > > INIT_PASSWD = "NBDMAGIC" > > INIT_MAGIC = 0x0000420281861253 > > REQUEST_MAGIC = 0x25609513 > > REPLY_MAGIC = 0x67446698 > > > > REQUEST_READ = 0 > > REQUEST_WRITE = 1 > > REQUEST_DISCONNECT = 2 > > > > Packets: > > > > init-packet: > > passwd : 8 bytes (string) = INIT_PASSWD > > magic : 8 bytes (integer) = INIT_MAGIC > > size : 8 bytes (integer) = size of the device in bytes > > reserved : 128 bytes (filled with zeros) > > > > request-packet: > > magic : 4 bytes (integer) = REQUEST_MAGIC > > type : 4 bytes (integer) = REQUEST_READ, REQUEST_WRITE or REQUEST_DISCONNECT > > handle : 8 bytes (integer) = request-handle > > from : 8 bytes (integer) = start offset for read/write-operation in bytes > > length : 4 bytes (integer) = length of the read/write-operationion bytes > > data : x bytes (only for write request, x = length field of this packet) > > > > reply-packet: > > magic : 4 bytes (integer) = REPLY_MAGIC > > error : 4 bytes (integer) = errorcode (0 = no error) > > handle : 8 bytes (integer) = copy of request-handle > > data : x bytes (only for reply to read request and if no error occured, > > x = length field of the request packet) > > > > all integer values are stored unsigned and in network-byte-order (big-endian) > > -- > When do you have a heart between your knees? > [Johanka's followup: and *two* hearts?] > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/