Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 5D6DB605BD
From:   Sricharan R <sricharan@codeaurora.org>
To:     andy.gross@linaro.org, david.brown@linaro.org, robh+dt@kernel.org,
        mark.rutland@arm.com, linux-arm-msm@vger.kernel.org,
        linux-soc@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     sricharan@codeaurora.org
Subject: [PATCH] arm: dts: qcom: Fix 'interrupts = <>' property to use proper  macros
Date:   Wed, 20 Jun 2018 14:53:39 +0530
Message-Id: <1529486619-443-1-git-send-email-sricharan@codeaurora.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Fix all nodes to use proper GIC_* macros for the interrupt type and the
interrupt trigger settings to avoid the boot warnings.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 41 ++++++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 1e0a3b4..70790ac 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Qualcomm IPQ8064";
@@ -43,7 +44,8 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	reserved-memory {
@@ -97,7 +99,7 @@
 			clock-names = "ahbix-clk",
 					"mi2s-osr-clk",
 					"mi2s-bit-clk";
-			interrupts = <0 85 1>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "lpass-irq-lpaif";
 			reg = <0x28100000 0x10000>;
 			reg-names = "lpass-lpaif";
@@ -111,7 +113,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -125,11 +127,16 @@
 		timer@200a000 {
 			compatible = "qcom,kpss-timer",
 				     "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>,
-				     <1 4 0x301>,
-				     <1 5 0x301>;
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <25000000>,
 					  <32768>;
@@ -177,7 +184,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12490000 0x1000>,
 				      <0x12480000 0x1000>;
-				interrupts = <0 195 0x0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -186,7 +193,7 @@
 			i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
-				interrupts = <0 196 0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
@@ -215,7 +222,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16340000 0x1000>,
 				      <0x16300000 0x1000>;
-				interrupts = <0 152 0x0>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -224,7 +231,7 @@
 			i2c@16380000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x16380000 0x1000>;
-				interrupts = <0 153 0>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
 				clock-names = "core", "iface";
@@ -252,7 +259,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x1000>,
 				      <0x1a200000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -261,7 +268,7 @@
 			i2c@1a280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 0>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
@@ -274,7 +281,7 @@
 			spi@1a280000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 0>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
@@ -301,7 +308,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16640000 0x1000>,
 				      <0x16600000 0x1000>;
-				interrupts = <0 158 0x0>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -323,7 +330,7 @@
 			compatible = "qcom,ipq806x-ahci", "generic-ahci";
 			reg = <0x29000000 0x180>;
 
-			interrupts = <0 209 0x0>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc SFAB_SATA_S_H_CLK>,
 				 <&gcc SATA_H_CLK>,
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
is a member of Code Aurora Forum, hosted by The Linux Foundation