Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Joel Stanley <joel@jms.id.au>,
        Andrew Jeffery <andrew@aj.id.au>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
        openbmc@lists.ozlabs.org
Cc:     Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
        Jason M Biils <jason.m.bills@linux.intel.com>,
        Ryan Chen <ryan_chen@aspeedtech.com>
Subject: [PATCH linux-next v6 05/13] ARM: dts: aspeed: peci: Add PECI node
Date:   Thu, 21 Jun 2018 12:40:34 -0700
Message-Id: <20180621194034.20813-1-jae.hyun.yoo@linux.intel.com>
In-Reply-To: <20180621193721.20588-1-jae.hyun.yoo@linux.intel.com>
References: <20180621193721.20588-1-jae.hyun.yoo@linux.intel.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This commit adds PECI bus/adapter node of AST24xx/AST25xx into
aspeed-g4 and aspeed-g5.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 26 ++++++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 26 ++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 75df1573380e..f7b83298e25f 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -29,6 +29,7 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &vuart;
+		peci0 = &peci0;
 	};
 
 	cpus {
@@ -295,6 +296,13 @@
 				};
 			};
 
+			peci: peci@1e78b000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e78b000 0x60>;
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -338,6 +346,24 @@
 	};
 };
 
+&peci {
+	peci0: peci-bus@0 {
+		compatible = "aspeed,ast2400-peci";
+		reg = <0x0 0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <15>;
+		clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+		resets = <&syscon ASPEED_RESET_PECI>;
+		clock-frequency = <24000000>;
+		msg-timing = <1>;
+		addr-timing = <1>;
+		rd-sampling-point = <8>;
+		cmd-timeout-ms = <1000>;
+		status = "disabled";
+	};
+};
+
 &i2c {
 	i2c_ic: interrupt-controller@0 {
 		#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 17f2714d18a7..f8eccdaacedc 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -29,6 +29,7 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &vuart;
+		peci0 = &peci0;
 	};
 
 	cpus {
@@ -352,6 +353,13 @@
 				};
 			};
 
+			peci: peci@1e78b000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e78b000 0x60>;
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -395,6 +403,24 @@
 	};
 };
 
+&peci {
+	peci0: peci-bus@0 {
+		compatible = "aspeed,ast2500-peci";
+		reg = <0x0 0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <15>;
+		clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+		resets = <&syscon ASPEED_RESET_PECI>;
+		clock-frequency = <24000000>;
+		msg-timing = <1>;
+		addr-timing = <1>;
+		rd-sampling-point = <8>;
+		cmd-timeout-ms = <1000>;
+		status = "disabled";
+	};
+};
+
 &i2c {
 	i2c_ic: interrupt-controller@0 {
 		#interrupt-cells = <1>;
-- 
2.17.1