Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCHv2 5/5] arm64: allwinner: a64: Add support for TERES-I
 laptop
To:     Icenowy Zheng <icenowy@aosc.io>, Harald Geyer <harald@ccbib.org>
References: <20180315162510.11669-1-harald@ccbib.org>
 <20180315162510.11669-6-harald@ccbib.org>
 <a7011fe78d171658742406bf01d50b7e3d7eaf1d.camel@aosc.io>
 <E1fX7yK-0000OC-HA@stardust.g4.wien.funkfeuer.at>
 <5B309D37.80207@broadcom.com> <1CF519CD-D44E-4959-8951-27CE710E0984@aosc.io>
Cc:     Maxime Ripard <maxime.ripard@bootlin.com>,
        Chen-Yu Tsai <wens@csie.org>,
        Kalle Valo <kvalo@codeaurora.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will.deacon@arm.com>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Andre Przywara <andre.przywara@arm.com>, info@olimex.com,
        linux-wireless@vger.kernel.org
From:   Arend van Spriel <arend.vanspriel@broadcom.com>
Message-ID: <5B30A40D.3070509@broadcom.com>
Date:   Mon, 25 Jun 2018 10:13:01 +0200
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:38.0) Gecko/20100101
 Thunderbird/38.5.0
MIME-Version: 1.0
In-Reply-To: <1CF519CD-D44E-4959-8951-27CE710E0984@aosc.io>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 6/25/2018 9:47 AM, Icenowy Zheng wrote:
>
>
> 于 2018年6月25日 GMT+08:00 下午3:43:51, Arend van Spriel <arend.vanspriel@broadcom.com> 写到:
>> On 6/24/2018 6:34 PM, Harald Geyer wrote:
>>> Icenowy Zheng writes:
>>>>> 在 2018-03-15四的 16:25 +0000，Harald Geyer写道：
>>>>>>> +&mmc1 {
>>>>>>> +	pinctrl-names = "default";
>>>>>>> +	pinctrl-0 = <&mmc1_pins>;
>>>>>>> +	vmmc-supply = <&reg_aldo2>;
>>>>>>> +	vqmmc-supply = <&reg_dldo4>;
>>>>>>> +	mmc-pwrseq = <&wifi_pwrseq>;
>>>>>>> +	bus-width = <4>;
>>>>>>> +	non-removable;
>>>>>>> +	status = "okay";
>>>>>>> +
>>>>>>> +	rtl8723bs: wifi@1 {
>>>>>>> +		reg = <1>;
>>>>>>> +		interrupt-parent = <&r_pio>;
>>>>>>> +		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
>>>>>>> +		interrupt-names = "host-wake";
>>>>>>> +	};
>>
>> [...]
>>
>>>>> - This device node has no binding. The "host-wake" interrupt is
>> part of
>>>>>   Broadcom SDIO Wi-Fi binding, rather than a generic one.
>>> I think the general mmc and interrupts bindings apply. And the mmc
>> binding
>>> clearly states that for sub-nodes a compatible string is optional.
>>>
>>> However I just realized that the 'interrupt-names' property is not
>> part
>>> of the general interrupts binding, so I guess at least this property
>> should
>>> be removed.
>>
>> Indeed. If the device just used the SDIO interrupt this is not needed.
>> The Broadcom device can use either SDIO interrupt or a so-called
>> out-of-band host-wake interrupt, which is what the above represents.
>
> RTL8....S is also capable of use OOB interrupt.

Ok. Is it also in-place in this TERES-I laptop? Anyway, if RTL8...S does 
not have a binding specification there is not much to do about it. In my 
opinion it does not make sense to add it to the generic mmc/sdio binding 
as this interrupt does not involve the mmc/sdio hardware hence the term 
OOB. There is generic wifi binding net/wireless/ieee80211.txt in which 
this could be added. Obviously it would just be a binding and no 
guarantee that the actual device driver supports it so the RTL driver 
would need modification for that.

Regards,
Arend