Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [Qemu-devel] Linux kernel configurations for various Microblaze
 systems
To:     "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc:     =?UTF-8?Q?Philippe_Mathieu-Daud=c3=a9?= <f4bug@amsat.org>,
        Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>,
        "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>,
        Michal Simek <monstr@monstr.eu>, linux-kernel@vger.kernel.org,
        qemu-devel@nongnu.org, Alistair Francis <alistair@alistair23.me>,
        KONRAD Frederic <frederic.konrad@adacore.com>
References: <20180627185248.GA19743@roeck-us.net>
 <96809884-2f46-ed63-48fd-9fd4c5050e20@amsat.org>
 <20180627205915.GA22693@roeck-us.net> <20180627224718.ewamlt42kvyirhjw@toto>
 <ae120580-01f2-672d-edc0-440c2dd3f248@roeck-us.net>
 <20180628041217.qxlspqzqfm4gszxd@toto>
From:   Guenter Roeck <linux@roeck-us.net>
Message-ID: <4193ce56-e3f8-d3f7-52a1-170f2d9185bb@roeck-us.net>
Date:   Wed, 27 Jun 2018 21:41:07 -0700
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101
 Thunderbird/52.8.0
MIME-Version: 1.0
In-Reply-To: <20180628041217.qxlspqzqfm4gszxd@toto>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 06/27/2018 09:12 PM, Edgar E. Iglesias wrote:
> On Wed, Jun 27, 2018 at 05:34:15PM -0700, Guenter Roeck wrote:
>> Hi Edgar,
>>
>> On 06/27/2018 03:47 PM, Edgar E. Iglesias wrote:
>>
>>>
>>> Hi Guenter,
>>>
>>> Re: ml605
>>> The thing to watch out for with kernel configs for microblaze systems is the
>>> physmem address setting. Unfortunately the kernel does not auto-detect this.
>>>
>>> I'm attaching a kernelconfig for the ml605 that works for me and a qemu commandline.
>>>
>>> qemu-system-microblazeel -M petalogix-ml605 -m 256 -serial mon:stdio -dtb petalogix-ml605.dtb -kernel arch/microblaze/boot/linux.bin -append rdinit=/bin/sh
>>>
>>
>> Can you also send me the dtb file or even better its source ? I don't think
>> the one in qemu is correct. It lists the serial port at 0x83e00000, but qemu
>> instantiates it at 0x83e01000.
> 
> I used the one from QEMU. IIRC, there's some offsetting going on there
> that differs between the Xilinx version and the PC version of these
> UARTs...

Yes, I noticed after I sent the previous e-mail.

> 
> Can you try again and see how it goes?
> If it doesn't work, I can share my kernel Image and we can compare from there.
> 

I tried lots of things, nothing worked. Until I got your e-mail, tried again,
and suddenly it works just great. Go figure. Turns out I had used a big endian
toolchain to build a little endian target. Shameface.

I do get this odd gcc warning:

cc1: warning: -mxl-multiply-high can be used only with -mcpu=v6.00.a or greater

Actual parameters are "-mcpu=v10.0 -mxl-multiply-high", so that doesn't really make
sense to me. I tried various toolchains, all with the same result. Any idea what
that is about ?

Thanks,
Guenter