Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261422AbTIKQnh (ORCPT ); Thu, 11 Sep 2003 12:43:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261424AbTIKQnh (ORCPT ); Thu, 11 Sep 2003 12:43:37 -0400 Received: from 7.Red-80-37-235.pooles.rima-tde.net ([80.37.235.7]:38532 "EHLO pau.newtral.org") by vger.kernel.org with ESMTP id S261422AbTIKQmv (ORCPT ); Thu, 11 Sep 2003 12:42:51 -0400 Date: Thu, 11 Sep 2003 18:42:48 +0200 (CEST) From: Pau Aliagas X-X-Sender: pau@pau.intranet.ct To: lkml Subject: IRQs and APIC conflicts with 2.6.0-test6 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11882 Lines: 278 I have a bunch of problems, all showed in the atached dmesg. This is an Acer Laptop with Via Chipset (I've sent the lspci in a previuos mail). Mainly, part of the hardware is not properly, detected, I cannot use neither pcmcia nor usb, I cannot suspend.... a total mess :( I'm willing to try any patch to fix it . Thanks. Linux version 2.6.0-test5 (pau@pau.intranet.ct) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #4 Wed Sep 10 10:41:38 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002dff0000 (usable) BIOS-e820: 000000002dff0000 - 000000002dffffc0 (ACPI data) BIOS-e820: 000000002dffffc0 - 000000002e000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 735MB LOWMEM available. On node 0 totalpages: 188400 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 184304 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 OID_00 ) @ 0x000e5010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x2dfffbc0 ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x2dfffac0 ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x2dfffb50 ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x2dfffb80 ACPI: DSDT (v001 INSYDE KN266 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: MADT not present Building zonelist for node : 0 Kernel command line: ro root=LABEL=/ resume=/dev/hda10 pci=noacpi pci=usepirqmask pci=biosirq Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1525.896 MHz processor. Console: colour VGA+ 80x25 Memory: 742692k/753600k available (1510k kernel code, 10152k reserved, 626k data, 148k init, 0k highmem) Calibrating delay loop... 2981.88 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0183fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1cbfbff 00000000 00000000 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1800+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1525.0612 MHz. ..... host bus clock speed is 265.0323 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xe8a04, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20030813 spurious 8259A interrupt: IRQ7. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: Embedded Controller [EC0] (gpe 1) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15, disabled) PCI: Probing PCI hardware PCI: Using IRQ router default [1106/3177] at 0000:00:11.0 PCI: Cannot allocate resource region 0 of device 0000:00:0a.0 divert: not allocating divert_blk for non-ethernet device lo pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Machine check exception polling timer started. VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API PCI: Via IRQ fixup for 0000:00:10.1, from 255 to 0 ACPI: AC Adapter [ADP0] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (43 C) RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N030ATCS04-0, ATA DISK drive Using anticipatory scheduling io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=58140/16/63, UDMA(100) hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 > hda2 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio4 serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 swsusp: Resume From Partition: /dev/hda10, Device: hda10 Resume Machine: This is normal swap space Resume Machine: Error -22 resuming ACPI: (supports S0 S3 S4 S5) RAMDISK: Compressed image found at block 0 Freeing initrd memory: 166k freed VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 148k freed Real Time Clock Driver v1.12 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: No IRQ known for interrupt pin D of device 0000:00:10.3. drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.3 setup! drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci-hcd 0000:00:10.0: UHCI Host Controller uhci-hcd 0000:00:10.0: irq 11, io base 00001200 uhci-hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected PCI: No IRQ known for interrupt pin B of device 0000:00:10.1. drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.1 setup! drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver EXT3 FS on hda6, internal journal Adding 811240k swap on /dev/hda10. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. blk: queue edd44a00, I/O limit 4095Mb (mask 0xffffffff) hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { DriveStatusError } hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: e615000000000185 kudzu: numerical sysctl 1 23 is obsolete. parport0: PC-style at 0x378 [PCSPP] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) inserting floppy driver for 2.6.0-test5 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 ip_tables: (C) 2000-2002 Netfilter core team via-rhine.c:v1.10-LK1.1.19-2.5 July-12-2003 Written by Donald Becker http://www.scyld.com/network/via-rhine.html divert: allocating divert_blk for eth0 eth0: VIA VT6102 Rhine-II at 0xf0008000, 00:c0:9f:29:06:73, IRQ 11. eth0: MII PHY found at address 1, status 0x7829 advertising 01e1 Link 0021. ip_tables: (C) 2000-2002 Netfilter core team Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:00:0a.0 [10cf:10e7] Yenta: ISA IRQ list 0018, PCI irq11 Socket status: 30000007 Bluetooth: Core ver 2.2 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.1 Bluetooth: L2CAP socket layer initialized ------------[ cut here ]------------ kernel BUG at include/net/sock.h:459! invalid operand: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010282 EIP is at l2cap_sock_alloc+0xce/0xe0 [l2cap] eax: ee94ed40 ebx: ec0f7e40 ecx: ec2dc680 edx: ec0f7e40 esi: 00000000 edi: ffffffa3 ebp: 00000001 esp: ec17befc ds: 007b es: 007b ss: 0068 Process sdpd (pid: 563, threadinfo=ec17a000 task=ec17d880) Stack: ec2dc680 00000000 00000024 000000d0 ee94ee84 00000000 ee8f28c6 ec2dc680 00000000 000000d0 ee9420ff ec2dc680 00000000 0000001f ffffff9f ec2dc680 c02166b0 ec2dc680 00000000 00000000 00000001 ec17bf90 00000000 c021685b Call Trace: [] l2cap_sock_create+0x76/0xb0 [l2cap] [] bt_sock_create+0x9f/0x110 [bluetooth] [] sock_create+0xf0/0x270 [] sys_socket+0x2b/0x60 [] sys_socketcall+0x95/0x2b0 [] do_gettimeofday+0x1a/0x90 [] sysenter_past_esp+0x52/0x71 Code: 0f 0b cb 01 86 60 8f ee e9 68 ff ff ff 90 8d 74 26 00 83 ec hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 SCSI subsystem initialized process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT ip_tables: (C) 2000-2002 Netfilter core team Installing knfsd (copyright (C) 1996 okir@monad.swb.de). svc: unknown version (3) nfs warning: mount version older than kernel NFS: NFSv3 not supported. lp0: using parport0 (polling). lp0: console ready warning: process `update' used the obsolete bdflush system call Fix your initscripts? apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. warning: process `update' used the obsolete bdflush system call Fix your initscripts? PCI: Setting latency timer of device 0000:00:11.5 to 64 cdrom: This disc doesn't have any tracks I recognize! -- Pau - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/