Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
In-Reply-To: <20180706153805.25842-4-icenowy@aosc.io>
References: <20180706153805.25842-1-icenowy@aosc.io> <20180706153805.25842-4-icenowy@aosc.io>
From:   Chen-Yu Tsai <wens@csie.org>
Date:   Sat, 7 Jul 2018 11:31:39 +0800
Message-ID: <CAGb2v663fgFQTHGCMmKwuf4RyW59YSbhtyr5nLBRRxakkEfRzw@mail.gmail.com>
Subject: Re: [linux-sunxi] [PATCH v2 3/9] arm64: allwinner: dts: h6: add
 USB2-related device nodes
To:     Icenowy Zheng <icenowy@aosc.io>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Maxime Ripard <maxime.ripard@bootlin.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        devicetree <devicetree@vger.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        linux-sunxi <linux-sunxi@googlegroups.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> Allwinner H6 has two USB2 ports, one OTG and one host-only.
>
> Add device tree nodes related to them.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 90 ++++++++++++++++++++
>  1 file changed, 90 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index c72da8cd9ef5..62fc0f5e10ba 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -174,6 +174,96 @@
>                         status = "disabled";
>                 };
>
> +               usb2otg: usb@5100000 {
> +                       compatible = "allwinner,sun8i-a33-musb";
> +                       reg = <0x05100000 0x0400>;
> +                       clocks = <&ccu CLK_BUS_OTG>;
> +                       resets = <&ccu RST_BUS_OTG>;
> +                       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "mc";
> +                       phys = <&usb2phy 0>;
> +                       phy-names = "usb";
> +                       extcon = <&usb2phy 0>;
> +                       status = "disabled";
> +               };
> +
> +               usb2phy: phy@5100400 {
> +                       compatible = "allwinner,sun50i-h6-usb-phy";
> +                       reg = <0x05100400 0x14>,
> +                             <0x05101800 0x4>,
> +                             <0x05311800 0x4>;
> +                       reg-names = "phy_ctrl",
> +                                   "pmu0",
> +                                   "pmu3";
> +                       clocks = <&ccu CLK_USB_PHY0>,
> +                                <&ccu CLK_USB_PHY3>;
> +                       clock-names = "usb0_phy",
> +                                     "usb3_phy";
> +                       resets = <&ccu RST_USB_PHY0>,
> +                                <&ccu RST_USB_PHY3>;
> +                       reset-names = "usb0_reset",
> +                                     "usb3_reset";
> +                       status = "disabled";
> +                       #phy-cells = <1>;
> +               };
> +
> +               ehci0: usb@5101000 {
> +                       compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
> +                       reg = <0x05101000 0x100>;
> +                       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI0>,
> +                                <&ccu CLK_BUS_EHCI0>,
> +                                <&ccu CLK_USB_OHCI0>;
> +                       resets = <&ccu RST_BUS_OHCI0>,
> +                                <&ccu RST_BUS_EHCI0>;
> +                       status = "disabled";
> +               };
> +
> +               ohci0: usb@5101400 {
> +                       compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
> +                       reg = <0x05101400 0x100>;
> +                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI0>,
> +                                <&ccu CLK_USB_OHCI0>;
> +                       resets = <&ccu RST_BUS_OHCI0>;
> +                       status = "disabled";
> +               };
> +
> +               usb3phy: phy@5210000 {

Maybe you should split this one out and put it in the USB 3.0 patch?

ChenYu

> +                       compatible = "allwinner,sun50i-h6-usb3-phy";
> +                       reg = <0x5210000 0x10000>;
> +                       clocks = <&ccu CLK_USB_PHY1>;
> +                       resets = <&ccu RST_USB_PHY1>;
> +                       #phy-cells = <0>;
> +                       status = "disabled";
> +               };
> +
> +               ehci3: usb@5311000 {
> +                       compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
> +                       reg = <0x05311000 0x100>;
> +                       interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI3>,
> +                                <&ccu CLK_BUS_EHCI3>,
> +                                <&ccu CLK_USB_OHCI3>;
> +                       resets = <&ccu RST_BUS_OHCI3>,
> +                                <&ccu RST_BUS_EHCI3>;
> +                       phys = <&usb2phy 3>;
> +                       phy-names = "usb";
> +                       status = "disabled";
> +               };
> +
> +               ohci3: usb@5311400 {
> +                       compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
> +                       reg = <0x05311400 0x100>;
> +                       interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI3>,
> +                                <&ccu CLK_USB_OHCI3>;
> +                       resets = <&ccu RST_BUS_OHCI3>;
> +                       phys = <&usb2phy 3>;
> +                       phy-names = "usb";
> +                       status = "disabled";
> +               };
> +
>                 r_ccu: clock@7010000 {
>                         compatible = "allwinner,sun50i-h6-r-ccu";
>                         reg = <0x07010000 0x400>;
> --
> 2.17.1
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.