Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Amit Kucheria <amit.kucheria@linaro.org>
To:     linux-kernel@vger.kernel.org
Cc:     rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
        bjorn.andersson@linaro.org, edubezval@gmail.com,
        smohanad@codeaurora.org, vivek.gautam@codeaurora.org,
        andy.gross@linaro.org, dianders@chromium.org, mka@chromium.org,
        Zhang Rui <rui.zhang@intel.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>, linux-pm@vger.kernel.org,
        devicetree@vger.kernel.org
Subject: [PATCH v7 5/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
Date:   Thu, 12 Jul 2018 14:09:06 +0530
Message-Id: <a385dfac661b04befd221f3012b2ca56576aada9.1531384019.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1531384019.git.amit.kucheria@linaro.org>
References: <cover.1531384019.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1531384019.git.amit.kucheria@linaro.org>
References: <cover.1531384019.git.amit.kucheria@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

We want to create common code for v2 of the TSENS IP block that is used in
a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle
most of the common functionality start with a common get_temp() function.

It is also necessary to split out the memory regions for the TM and SROT
register banks because their offsets are not constant across SoC families.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
 .../devicetree/bindings/thermal/qcom-tsens.txt     | 31 +++++++++++++++++-----
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 06195e8..b5312a8 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -1,18 +1,28 @@
 * QCOM SoC Temperature Sensor (TSENS)
 
 Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+  Must be one of the following:
+    - "qcom,msm8916-tsens" (MSM8916)
+    - "qcom,msm8974-tsens" (MSM8974)
+    - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
+  with version 2 of the TSENS IP. MSM8996 is the only exception beacause the
+  generic property did not exist when support was added.
+
+- reg: Address range of the thermal registers.
+  New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
+  register spaces separately, with order being TM before SROT.
+  See Example 2, below.
 
-- reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 - #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
-Example:
+Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced):
 tsens: thermal-sensor@900000 {
 		compatible = "qcom,msm8916-tsens";
 		reg = <0x4a8000 0x2000>;
@@ -20,3 +30,12 @@ tsens: thermal-sensor@900000 {
 		nvmem-cell-names = "caldata", "calsel";
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: thermal-sensor@c263000 {
+		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+		reg = <0xc263000 0x1ff>, /* TM */
+			<0xc222000 0x1ff>; /* SROT */
+		#qcom,sensors = <13>;
+		#thermal-sensor-cells = <1>;
+	};
-- 
2.7.4