Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   =?UTF-8?q?Pawe=C5=82=20Chmiel?= <pawel.mikolaj.chmiel@gmail.com>
To:     lgirdwood@gmail.com, broonie@kernel.org, sre@kernel.org,
        lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com
Cc:     linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        devicetree@vger.kernel.org,
        =?UTF-8?q?Pawe=C5=82=20Chmiel?= <pawel.mikolaj.chmiel@gmail.com>
Subject: [PATCH v3 3/3] dt-bindings: mfd: max8998: Add charger subnode binding
Date:   Tue, 17 Jul 2018 18:05:09 +0200
Message-Id: <1531843509-3533-4-git-send-email-pawel.mikolaj.chmiel@gmail.com>
In-Reply-To: <1531843509-3533-1-git-send-email-pawel.mikolaj.chmiel@gmail.com>
References: <1531843509-3533-1-git-send-email-pawel.mikolaj.chmiel@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patch adds devicetree bindings documentation for
battery charging controller as the subnode of MAX8998 PMIC.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
Changes from v2:
  - Make charge-restart-level-microvolt optional.
  - Make charge-timeout-hours optional.

Changes from v1:
  - Removed unneeded Fixes tag
  - Correct description of all charger values
  - Added missing property unit
---
 Documentation/devicetree/bindings/mfd/max8998.txt | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
index 23a3650ff2a2..264040f4ad15 100644
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -50,6 +50,24 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
 - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
   for buck2 regulator that can be selected using dvs gpio.
 
+Charger: Configuration for battery charging controller should be added
+inside a child node named 'charger'.
+  Required properties:
+  - max8998,charge-eoc-percent: Setup End of Charge Level.
+    If value equals 0, leave it unchanged.
+    Otherwise it should be value from 10 to 45 by 5 step.
+
+  Optional properties:
+  - max8998,charge-restart-level-microvolt: Setup Charge Restart Level.
+    If property is not present, this will be disabled.
+    If value equals 0, leave it unchanged.
+    Otherwise it should be one of following values: 100, 150, 200.
+
+  - max8998,charge-timeout-hours: Setup Charge Full Timeout.
+    If property is not present, this will be disabled.
+    If value equals 0, leave it unchanged.
+    Otherwise it should be one of following values: 5, 6, 7.
+
 Regulators: All the regulators of MAX8998 to be instantiated shall be
 listed in a child node named 'regulators'. Each regulator is represented
 by a child node of the 'regulators' node.
@@ -99,6 +117,13 @@ Example:
 		max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
 		max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
 
+		/* Charger configuration */
+		charger {
+			max8998,charge-eoc-percent = <0>;
+			max8998,charge-restart-level-microvolt = <100>;
+			max8998,charge-timeout-hours = <7>;
+		};
+
 		/* Regulators to instantiate */
 		regulators {
 			ldo2_reg: LDO2 {
-- 
2.7.4