Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   =?UTF-8?q?Pawe=C5=82=20Chmiel?= <pawel.mikolaj.chmiel@gmail.com>
To:     nick@shmanahar.org
Cc:     dmitry.torokhov@gmail.com, robh+dt@kernel.org,
        mark.rutland@arm.com, nicolas.ferre@microchip.com,
        alexandre.belloni@bootlin.com, linux-input@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org,
        =?UTF-8?q?Pawe=C5=82=20Chmiel?= <pawel.mikolaj.chmiel@gmail.com>
Subject: [PATCH v2 2/2] Input: atmel_mxt_ts: Document optional voltage regulators
Date:   Tue, 17 Jul 2018 20:16:26 +0200
Message-Id: <1531851386-17840-3-git-send-email-pawel.mikolaj.chmiel@gmail.com>
In-Reply-To: <1531851386-17840-1-git-send-email-pawel.mikolaj.chmiel@gmail.com>
References: <1531851386-17840-1-git-send-email-pawel.mikolaj.chmiel@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Document new optional voltage regulators, which can be used
to power down/up touchscreen.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
 Documentation/devicetree/bindings/input/atmel,maxtouch.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index c88919480d37..17930ecadad3 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -31,6 +31,12 @@ Optional properties for main touchpad device:
 
 - reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
 
+- avdd-supply: Analog power supply. It powers up the analog channel block
+    of the controller to detect the touches.
+
+- vdd-supply: Digital power supply. It powers up the digital block
+    of the controller to enable i2c communication.
+
 Example:
 
 	touch@4b {
@@ -38,4 +44,6 @@ Example:
 		reg = <0x4b>;
 		interrupt-parent = <&gpio>;
 		interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&atsp_reg>;
+		vdd-supply = <&tsp_reg>;
 	};
-- 
2.7.4