Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Tue, 17 Jul 2018 16:42:13 -0700
From:   Matthias Kaehlcke <mka@chromium.org>
To:     Amit Kucheria <amit.kucheria@linaro.org>
Cc:     linux-kernel@vger.kernel.org, rnayak@codeaurora.org,
        linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org,
        edubezval@gmail.com, smohanad@codeaurora.org,
        vivek.gautam@codeaurora.org, andy.gross@linaro.org,
        dianders@chromium.org, David Brown <david.brown@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will.deacon@arm.com>, linux-soc@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v7 3/7] arm64: dts: msm8996: thermal: Initialise via DT
 and add second controller
Message-ID: <20180717234213.GD129942@google.com>
References: <cover.1531384019.git.amit.kucheria@linaro.org>
 <f6cb99e6b805b0850b039e4f5d469e761d84f6d0.1531384019.git.amit.kucheria@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <f6cb99e6b805b0850b039e4f5d469e761d84f6d0.1531384019.git.amit.kucheria@linaro.org>
User-Agent: Mutt/1.9.2 (2017-12-15)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, Jul 12, 2018 at 02:09:04PM +0530, Amit Kucheria wrote:
> We also split up the regmap address space into two, for the TM and SROT
> registers. This was required to deal with different address offsets for the
> TM and SROT registers across different SoC families.
> 
> 8996 has two TSENS IP blocks, initialise the second one too.
> 
> Since tsens-common.c/init_common() currently only registers one address
> space, the order is important (TM before SROT). This is OK since the code
> doesn't really use the SROT functionality yet.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 8c7f9ca..688e752 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -459,9 +459,19 @@
>  			status = "disabled";
>  		};
>  
> -		tsens0: thermal-sensor@4a8000 {
> +		tsens0: thermal-sensor@4a9000 {
                                       ~~~~~~

I suppose the address of the TM block is used here instead of the SROT
address (which is lower) since SROT functionality is currently not
used. Would/should this change if/when the driver uses SROT?

>  			compatible = "qcom,msm8996-tsens";
> -			reg = <0x4a8000 0x2000>;
> +			reg = <0x4a9000 0x1000>, /* TM */
> +			      <0x4a8000 0x1000>; /* SROT */
> +			#qcom,sensors = <13>;
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		tsens1: thermal-sensor@4ad000 {
> +			compatible = "qcom,msm8996-tsens";
> +			reg = <0x4ad000 0x1000>, /* TM */
> +			      <0x4ac000 0x1000>; /* SROT */
> +			#qcom,sensors = <8>;
>  			#thermal-sensor-cells = <1>;
>  		};