Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Amit Kucheria <amit.kucheria@linaro.org>
To:     linux-kernel@vger.kernel.org
Cc:     rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
        bjorn.andersson@linaro.org, edubezval@gmail.com,
        smohanad@codeaurora.org, vivek.gautam@codeaurora.org,
        andy.gross@linaro.org, dianders@chromium.org, mka@chromium.org,
        David Brown <david.brown@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will.deacon@arm.com>, linux-soc@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 7/7] arm64: dts: sdm845: Add tsens nodes
Date:   Wed, 18 Jul 2018 12:13:13 +0530
Message-Id: <d263ed254f53a7e79c19ff471b5873a6f5eafd4d.1531895128.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1531895128.git.amit.kucheria@linaro.org>
References: <cover.1531895128.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1531895128.git.amit.kucheria@linaro.org>
References: <cover.1531895128.git.amit.kucheria@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

SDM845 has two tsens blocks, one with 13 sensors and the other with 8
sensors. It uses version 2 of the TSENS IP, so use the fallback property to
allow more common code.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb..01ff146 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -221,6 +221,22 @@
 			#interrupt-cells = <2>;
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc263000 0x1ff>, /* TM */
+			      <0xc222000 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc265000 0x1ff>, /* TM */
+			      <0xc223000 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0x1100>,
-- 
2.7.4