Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Icenowy Zheng <icenowy@aosc.io>
To:     Rob Herring <robh+dt@kernel.org>,
        Maxime Ripard <maxime.ripard@bootlin.com>,
        Chen-Yu Tsai <wens@csie.org>,
        Kishon Vijay Abraham I <kishon@ti.com>
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
        Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v3 5/9] arm64: allwinner: dts: h6: enable USB2 on Pine H64
Date:   Sun, 22 Jul 2018 13:57:35 +0800
Message-Id: <20180722055739.26464-6-icenowy@aosc.io>
In-Reply-To: <20180722055739.26464-1-icenowy@aosc.io>
References: <20180722055739.26464-1-icenowy@aosc.io>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Pine H64 board has both the USB2 OTG pins and the USB2 host pins on H6
SoC wired out to USB Type-A ports.

Enable them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
---
Changes in v3:
- Added Chen-Yu's Review tag.

 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index f21e18f8ed37..97016a848d5b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -51,6 +51,14 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -69,6 +77,14 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
 &r_i2c {
 	status = "okay";
 
@@ -193,3 +209,14 @@
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb3_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
-- 
2.18.0