Received: by 2002:ac0:a5a7:0:0:0:0:0 with SMTP id m36-v6csp998728imm; Wed, 25 Jul 2018 09:41:53 -0700 (PDT) X-Google-Smtp-Source: AAOMgpfQILxBpYYX7ww6Peg3aNnlGaj/hDfIepK4nLHt37RaL4Il02xulk4K8nYjrLoaUOi9e1RG X-Received: by 2002:a62:f206:: with SMTP id m6-v6mr22670061pfh.171.1532536913062; Wed, 25 Jul 2018 09:41:53 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1532536913; cv=none; d=google.com; s=arc-20160816; b=WA4j1oMOJLQc6ezn1DlcRl0nS3vdjrEIHE0JahXiTfiMMylkvKRRYmOaMfvB0kp7ZH xWMidHmh0SOxp/hJmh8z2fQb0hx/tQmVXLKNRH/dj1BUA7HsnRkGGycHvoVs/d1bhLux CzqphoVY+2QIVxdrKufZVL792u8kdYRlfnkOKND/tRI7LJGsShMLGZRH4Pn+/JJmTgum li3fGwvykxOpgQuD1DCi9fsCeAx430HuuG5ZCjAjpBo4lPEfulJWSUQ40EI7pBBCtZKN AHOluM+yXvTpjv7aKVD38zjt6OdkSnxTJhfZzhq+isMdDXZ9EV4bAph7dIrwoWvFjJJf 7uyg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:arc-authentication-results; bh=5s9avU7OkfHdyClGxusVn0ePmZMDM1mn972+42eI050=; b=XoZp44ANM/G+/QzSYn4GsDTZUrRKmX1E2wDajhj/NZKDCU3w96QKydqxZL9h/cS1ji Ccp9Tavw08JArqi7SNCyVW1eHiGziXH8GHIm8dHYfnPsblJyGNRM6nxNl9za+HvL9ZSZ GnD4vgTJK2K32FvQF7s88NNJHt9rGef4FhGkbZYTcJSrK5iv0Ym+haHxOBlLJ9ibC62H lR94KxWdtncArN7is3ZK+VLLlM+kSmyGQhLObeEAAO3EomVFCzJI0qrrMl/C7w4d4VSj zl/l2yVx0Bn8nlr/irmSDoaOd1i4wFMRAOhVNaQ0gHVtgJFGALEd02qwQWCkCsx8Gs2Z RELQ== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id e10-v6si15828520pge.48.2018.07.25.09.41.38; Wed, 25 Jul 2018 09:41:53 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731359AbeGYRwd (ORCPT + 99 others); Wed, 25 Jul 2018 13:52:33 -0400 Received: from ns.mm-sol.com ([37.157.136.199]:35612 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729882AbeGYRv3 (ORCPT ); Wed, 25 Jul 2018 13:51:29 -0400 Received: from mms-0439.qualcomm.mm-sol.com (unknown [37.157.136.206]) by extserv.mm-sol.com (Postfix) with ESMTPSA id 584ABCD65; Wed, 25 Jul 2018 19:38:54 +0300 (EEST) From: Todor Tomov To: mchehab@kernel.org, sakari.ailus@linux.intel.com, hans.verkuil@cisco.com, laurent.pinchart+renesas@ideasonboard.com, linux-media@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Todor Tomov Subject: [PATCH v4 19/34] media: camss: csiphy: Split to hardware dependent and independent parts Date: Wed, 25 Jul 2018 19:38:28 +0300 Message-Id: <1532536723-19062-20-git-send-email-todor.tomov@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1532536723-19062-1-git-send-email-todor.tomov@linaro.org> References: <1532536723-19062-1-git-send-email-todor.tomov@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This will allow to add support for different hardware. Signed-off-by: Todor Tomov --- drivers/media/platform/qcom/camss/Makefile | 1 + .../platform/qcom/camss/camss-csiphy-2ph-1-0.c | 173 +++++++++++++++++++++ drivers/media/platform/qcom/camss/camss-csiphy.c | 171 +++----------------- drivers/media/platform/qcom/camss/camss-csiphy.h | 17 ++ 4 files changed, 214 insertions(+), 148 deletions(-) create mode 100644 drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile index 3c4024f..0446b24 100644 --- a/drivers/media/platform/qcom/camss/Makefile +++ b/drivers/media/platform/qcom/camss/Makefile @@ -3,6 +3,7 @@ qcom-camss-objs += \ camss.o \ camss-csid.o \ + camss-csiphy-2ph-1-0.o \ camss-csiphy.o \ camss-ispif.o \ camss-vfe.o \ diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c new file mode 100644 index 0000000..7325906 --- /dev/null +++ b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * camss-csiphy-2ph-1-0.c + * + * Qualcomm MSM Camera Subsystem - CSIPHY Module 2phase v1.0 + * + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2016-2018 Linaro Ltd. + */ + +#include "camss-csiphy.h" + +#include +#include + +#define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n)) +#define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n)) +#define CAMSS_CSI_PHY_GLBL_RESET 0x140 +#define CAMSS_CSI_PHY_GLBL_PWR_CFG 0x144 +#define CAMSS_CSI_PHY_GLBL_IRQ_CMD 0x164 +#define CAMSS_CSI_PHY_HW_VERSION 0x188 +#define CAMSS_CSI_PHY_INTERRUPT_STATUSn(n) (0x18c + 0x4 * (n)) +#define CAMSS_CSI_PHY_INTERRUPT_MASKn(n) (0x1ac + 0x4 * (n)) +#define CAMSS_CSI_PHY_INTERRUPT_CLEARn(n) (0x1cc + 0x4 * (n)) +#define CAMSS_CSI_PHY_GLBL_T_INIT_CFG0 0x1ec +#define CAMSS_CSI_PHY_T_WAKEUP_CFG0 0x1f4 + +static void csiphy_hw_version_read(struct csiphy_device *csiphy, + struct device *dev) +{ + u8 hw_version = readl_relaxed(csiphy->base + + CAMSS_CSI_PHY_HW_VERSION); + + dev_dbg(dev, "CSIPHY HW Version = 0x%02x\n", hw_version); +} + +/* + * csiphy_reset - Perform software reset on CSIPHY module + * @csiphy: CSIPHY device + */ +static void csiphy_reset(struct csiphy_device *csiphy) +{ + writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); + usleep_range(5000, 8000); + writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); +} + +/* + * csiphy_settle_cnt_calc - Calculate settle count value + * + * Helper function to calculate settle count value. This is + * based on the CSI2 T_hs_settle parameter which in turn + * is calculated based on the CSI2 transmitter pixel clock + * frequency. + * + * Return settle count value or 0 if the CSI2 pixel clock + * frequency is not available + */ +static u8 csiphy_settle_cnt_calc(u32 pixel_clock, u8 bpp, u8 num_lanes, + u32 timer_clk_rate) +{ + u32 mipi_clock; /* Hz */ + u32 ui; /* ps */ + u32 timer_period; /* ps */ + u32 t_hs_prepare_max; /* ps */ + u32 t_hs_prepare_zero_min; /* ps */ + u32 t_hs_settle; /* ps */ + u8 settle_cnt; + + mipi_clock = pixel_clock * bpp / (2 * num_lanes); + ui = div_u64(1000000000000LL, mipi_clock); + ui /= 2; + t_hs_prepare_max = 85000 + 6 * ui; + t_hs_prepare_zero_min = 145000 + 10 * ui; + t_hs_settle = (t_hs_prepare_max + t_hs_prepare_zero_min) / 2; + + timer_period = div_u64(1000000000000LL, timer_clk_rate); + settle_cnt = t_hs_settle / timer_period - 1; + + return settle_cnt; +} + +static void csiphy_lanes_enable(struct csiphy_device *csiphy, + struct csiphy_config *cfg, + u32 pixel_clock, u8 bpp, u8 lane_mask) +{ + struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg; + u8 settle_cnt; + u8 val; + int i = 0; + + settle_cnt = csiphy_settle_cnt_calc(pixel_clock, bpp, c->num_data, + csiphy->timer_clk_rate); + + writel_relaxed(0x1, csiphy->base + + CAMSS_CSI_PHY_GLBL_T_INIT_CFG0); + writel_relaxed(0x1, csiphy->base + + CAMSS_CSI_PHY_T_WAKEUP_CFG0); + + val = 0x1; + val |= lane_mask << 1; + writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG); + + val = cfg->combo_mode << 4; + writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); + + while (lane_mask) { + if (lane_mask & 0x1) { + writel_relaxed(0x10, csiphy->base + + CAMSS_CSI_PHY_LNn_CFG2(i)); + writel_relaxed(settle_cnt, csiphy->base + + CAMSS_CSI_PHY_LNn_CFG3(i)); + writel_relaxed(0x3f, csiphy->base + + CAMSS_CSI_PHY_INTERRUPT_MASKn(i)); + writel_relaxed(0x3f, csiphy->base + + CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); + } + + lane_mask >>= 1; + i++; + } +} + +static void csiphy_lanes_disable(struct csiphy_device *csiphy, u8 lane_mask) +{ + int i = 0; + + while (lane_mask) { + if (lane_mask & 0x1) + writel_relaxed(0x0, csiphy->base + + CAMSS_CSI_PHY_LNn_CFG2(i)); + + lane_mask >>= 1; + i++; + } + + writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG); +} + +/* + * csiphy_isr - CSIPHY module interrupt handler + * @irq: Interrupt line + * @dev: CSIPHY device + * + * Return IRQ_HANDLED on success + */ +static irqreturn_t csiphy_isr(int irq, void *dev) +{ + struct csiphy_device *csiphy = dev; + u8 i; + + for (i = 0; i < 8; i++) { + u8 val = readl_relaxed(csiphy->base + + CAMSS_CSI_PHY_INTERRUPT_STATUSn(i)); + writel_relaxed(val, csiphy->base + + CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); + writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD); + writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD); + writel_relaxed(0x0, csiphy->base + + CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); + } + + return IRQ_HANDLED; +} + +const struct csiphy_hw_ops csiphy_ops_2ph_1_0 = { + .hw_version_read = csiphy_hw_version_read, + .reset = csiphy_reset, + .lanes_enable = csiphy_lanes_enable, + .lanes_disable = csiphy_lanes_disable, + .isr = csiphy_isr, +}; + diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c index 4aeaedb..8d10e85 100644 --- a/drivers/media/platform/qcom/camss/camss-csiphy.c +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c @@ -23,18 +23,6 @@ #define MSM_CSIPHY_NAME "msm_csiphy" -#define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n)) -#define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n)) -#define CAMSS_CSI_PHY_GLBL_RESET 0x140 -#define CAMSS_CSI_PHY_GLBL_PWR_CFG 0x144 -#define CAMSS_CSI_PHY_GLBL_IRQ_CMD 0x164 -#define CAMSS_CSI_PHY_HW_VERSION 0x188 -#define CAMSS_CSI_PHY_INTERRUPT_STATUSn(n) (0x18c + 0x4 * (n)) -#define CAMSS_CSI_PHY_INTERRUPT_MASKn(n) (0x1ac + 0x4 * (n)) -#define CAMSS_CSI_PHY_INTERRUPT_CLEARn(n) (0x1cc + 0x4 * (n)) -#define CAMSS_CSI_PHY_GLBL_T_INIT_CFG0 0x1ec -#define CAMSS_CSI_PHY_T_WAKEUP_CFG0 0x1f4 - static const struct { u32 code; u8 bpp; @@ -125,32 +113,6 @@ static u8 csiphy_get_bpp(u32 code) } /* - * csiphy_isr - CSIPHY module interrupt handler - * @irq: Interrupt line - * @dev: CSIPHY device - * - * Return IRQ_HANDLED on success - */ -static irqreturn_t csiphy_isr(int irq, void *dev) -{ - struct csiphy_device *csiphy = dev; - u8 i; - - for (i = 0; i < 8; i++) { - u8 val = readl_relaxed(csiphy->base + - CAMSS_CSI_PHY_INTERRUPT_STATUSn(i)); - writel_relaxed(val, csiphy->base + - CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); - writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD); - writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD); - writel_relaxed(0x0, csiphy->base + - CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); - } - - return IRQ_HANDLED; -} - -/* * csiphy_set_clock_rates - Calculate and set clock rates on CSIPHY module * @csiphy: CSIPHY device */ @@ -215,17 +177,6 @@ static int csiphy_set_clock_rates(struct csiphy_device *csiphy) } /* - * csiphy_reset - Perform software reset on CSIPHY module - * @csiphy: CSIPHY device - */ -static void csiphy_reset(struct csiphy_device *csiphy) -{ - writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); - usleep_range(5000, 8000); - writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); -} - -/* * csiphy_set_power - Power on/off CSIPHY module * @sd: CSIPHY V4L2 subdevice * @on: Requested power state @@ -238,7 +189,6 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on) struct device *dev = csiphy->camss->dev; if (on) { - u8 hw_version; int ret; ret = pm_runtime_get_sync(dev); @@ -259,11 +209,9 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on) enable_irq(csiphy->irq); - csiphy_reset(csiphy); + csiphy->ops->reset(csiphy); - hw_version = readl_relaxed(csiphy->base + - CAMSS_CSI_PHY_HW_VERSION); - dev_dbg(dev, "CSIPHY HW Version = 0x%02x\n", hw_version); + csiphy->ops->hw_version_read(csiphy, dev); } else { disable_irq(csiphy->irq); @@ -295,77 +243,34 @@ static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg) } /* - * csiphy_settle_cnt_calc - Calculate settle count value + * csiphy_stream_on - Enable streaming on CSIPHY module * @csiphy: CSIPHY device * - * Helper function to calculate settle count value. This is - * based on the CSI2 T_hs_settle parameter which in turn - * is calculated based on the CSI2 transmitter pixel clock - * frequency. + * Helper function to enable streaming on CSIPHY module. + * Main configuration of CSIPHY module is also done here. * - * Return settle count value or 0 if the CSI2 pixel clock - * frequency is not available + * Return 0 on success or a negative error code otherwise */ -static u8 csiphy_settle_cnt_calc(struct csiphy_device *csiphy) +static int csiphy_stream_on(struct csiphy_device *csiphy) { - u8 bpp = csiphy_get_bpp( - csiphy->fmt[MSM_CSIPHY_PAD_SINK].code); - u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data; - u32 pixel_clock; /* Hz */ - u32 mipi_clock; /* Hz */ - u32 ui; /* ps */ - u32 timer_period; /* ps */ - u32 t_hs_prepare_max; /* ps */ - u32 t_hs_prepare_zero_min; /* ps */ - u32 t_hs_settle; /* ps */ - u8 settle_cnt; + struct csiphy_config *cfg = &csiphy->cfg; + u32 pixel_clock; + u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg); + u8 bpp = csiphy_get_bpp(csiphy->fmt[MSM_CSIPHY_PAD_SINK].code); + u8 val; int ret; ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock); if (ret) { dev_err(csiphy->camss->dev, "Cannot get CSI2 transmitter's pixel clock\n"); - return 0; + return -EINVAL; } if (!pixel_clock) { dev_err(csiphy->camss->dev, "Got pixel clock == 0, cannot continue\n"); - return 0; - } - - mipi_clock = pixel_clock * bpp / (2 * num_lanes); - ui = div_u64(1000000000000LL, mipi_clock); - ui /= 2; - t_hs_prepare_max = 85000 + 6 * ui; - t_hs_prepare_zero_min = 145000 + 10 * ui; - t_hs_settle = (t_hs_prepare_max + t_hs_prepare_zero_min) / 2; - - timer_period = div_u64(1000000000000LL, csiphy->timer_clk_rate); - settle_cnt = t_hs_settle / timer_period - 1; - - return settle_cnt; -} - -/* - * csiphy_stream_on - Enable streaming on CSIPHY module - * @csiphy: CSIPHY device - * - * Helper function to enable streaming on CSIPHY module. - * Main configuration of CSIPHY module is also done here. - * - * Return 0 on success or a negative error code otherwise - */ -static int csiphy_stream_on(struct csiphy_device *csiphy) -{ - struct csiphy_config *cfg = &csiphy->cfg; - u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg); - u8 settle_cnt; - u8 val; - int i = 0; - - settle_cnt = csiphy_settle_cnt_calc(csiphy); - if (!settle_cnt) return -EINVAL; + } val = readl_relaxed(csiphy->base_clk_mux); if (cfg->combo_mode && (lane_mask & 0x18) == 0x18) { @@ -378,33 +283,7 @@ static int csiphy_stream_on(struct csiphy_device *csiphy) writel_relaxed(val, csiphy->base_clk_mux); wmb(); - writel_relaxed(0x1, csiphy->base + - CAMSS_CSI_PHY_GLBL_T_INIT_CFG0); - writel_relaxed(0x1, csiphy->base + - CAMSS_CSI_PHY_T_WAKEUP_CFG0); - - val = 0x1; - val |= lane_mask << 1; - writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG); - - val = cfg->combo_mode << 4; - writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); - - while (lane_mask) { - if (lane_mask & 0x1) { - writel_relaxed(0x10, csiphy->base + - CAMSS_CSI_PHY_LNn_CFG2(i)); - writel_relaxed(settle_cnt, csiphy->base + - CAMSS_CSI_PHY_LNn_CFG3(i)); - writel_relaxed(0x3f, csiphy->base + - CAMSS_CSI_PHY_INTERRUPT_MASKn(i)); - writel_relaxed(0x3f, csiphy->base + - CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); - } - - lane_mask >>= 1; - i++; - } + csiphy->ops->lanes_enable(csiphy, cfg, pixel_clock, bpp, lane_mask); return 0; } @@ -418,18 +297,8 @@ static int csiphy_stream_on(struct csiphy_device *csiphy) static void csiphy_stream_off(struct csiphy_device *csiphy) { u8 lane_mask = csiphy_get_lane_mask(&csiphy->cfg.csi2->lane_cfg); - int i = 0; - while (lane_mask) { - if (lane_mask & 0x1) - writel_relaxed(0x0, csiphy->base + - CAMSS_CSI_PHY_LNn_CFG2(i)); - - lane_mask >>= 1; - i++; - } - - writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG); + csiphy->ops->lanes_disable(csiphy, lane_mask); } @@ -696,6 +565,11 @@ int msm_csiphy_subdev_init(struct camss *camss, csiphy->id = id; csiphy->cfg.combo_mode = 0; + if (camss->version == CAMSS_8x16) + csiphy->ops = &csiphy_ops_2ph_1_0; + else + return -EINVAL; + /* Memory */ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]); @@ -724,7 +598,8 @@ int msm_csiphy_subdev_init(struct camss *camss, csiphy->irq = r->start; snprintf(csiphy->irq_name, sizeof(csiphy->irq_name), "%s_%s%d", dev_name(dev), MSM_CSIPHY_NAME, csiphy->id); - ret = devm_request_irq(dev, csiphy->irq, csiphy_isr, + + ret = devm_request_irq(dev, csiphy->irq, csiphy->ops->isr, IRQF_TRIGGER_RISING, csiphy->irq_name, csiphy); if (ret < 0) { dev_err(dev, "request_irq failed: %d\n", ret); diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.h b/drivers/media/platform/qcom/camss/camss-csiphy.h index 728dfef..edad941 100644 --- a/drivers/media/platform/qcom/camss/camss-csiphy.h +++ b/drivers/media/platform/qcom/camss/camss-csiphy.h @@ -11,6 +11,7 @@ #define QC_MSM_CAMSS_CSIPHY_H #include +#include #include #include #include @@ -41,6 +42,19 @@ struct csiphy_config { struct csiphy_csi2_cfg *csi2; }; +struct csiphy_device; + +struct csiphy_hw_ops { + void (*hw_version_read)(struct csiphy_device *csiphy, + struct device *dev); + void (*reset)(struct csiphy_device *csiphy); + void (*lanes_enable)(struct csiphy_device *csiphy, + struct csiphy_config *cfg, + u32 pixel_clock, u8 bpp, u8 lane_mask); + void (*lanes_disable)(struct csiphy_device *csiphy, u8 lane_mask); + irqreturn_t (*isr)(int irq, void *dev); +}; + struct csiphy_device { struct camss *camss; u8 id; @@ -55,6 +69,7 @@ struct csiphy_device { u32 timer_clk_rate; struct csiphy_config cfg; struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM]; + const struct csiphy_hw_ops *ops; }; struct resources; @@ -68,4 +83,6 @@ int msm_csiphy_register_entity(struct csiphy_device *csiphy, void msm_csiphy_unregister_entity(struct csiphy_device *csiphy); +extern const struct csiphy_hw_ops csiphy_ops_2ph_1_0; + #endif /* QC_MSM_CAMSS_CSIPHY_H */ -- 2.7.4