Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Arun Parameswaran <arun.parameswaran@broadcom.com>
To:     "David S. Miller" <davem@davemloft.net>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Andrew Lunn <andrew@lunn.ch>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Ray Jui <rjui@broadcom.com>,
        Scott Branden <sbranden@broadcom.com>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will.deacon@arm.com>
Cc:     netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        bcm-kernel-feedback-list@broadcom.com,
        Arun Parameswaran <arun.parameswaran@broadcom.com>
Subject: [PATCH v2 5/7] dt-bindings: net: Add clock handle to Broadcom iProc mdio mux
Date:   Fri, 27 Jul 2018 14:23:31 -0700
Message-Id: <1532726613-6483-6-git-send-email-arun.parameswaran@broadcom.com>
In-Reply-To: <1532726613-6483-1-git-send-email-arun.parameswaran@broadcom.com>
References: <1532726613-6483-1-git-send-email-arun.parameswaran@broadcom.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add clock phandle, of the core clock driving the mdio block, as an
optional property to the Broadcom iProc mdio mux.

The clock, when specified, will be used to setup the rate adjust registers
in the mdio to derrive the mdio's operating frequency.

Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
---
 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
index dc8aa68..b58843f 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
@@ -13,6 +13,9 @@ MDIO multiplexer node:
 Every non-ethernet PHY requires a compatible so that it could be probed based
 on this compatible string.
 
+Optional properties:
+- clocks: phandle of the core clock which drives the mdio block.
+
 Additional information regarding generic multiplexer properties can be found
 at- Documentation/devicetree/bindings/net/mdio-mux.txt
 
-- 
1.9.1